Operation Manual

INSTALLING SOFTWARE
14
Installing the Software
7 Review the settings to ensure all are
correct, and then click [Next]. If the
settings are incorrect, click [Back] to go
back and correct.
• The InstallShield Wizard completes
preparations for installing the software,
and then the Setup Status dialog box
appears.
• After all files necessary to install the P-
touch Editor have been copied and
registered, the Driver Setup dialog box
appears.
8 When the Driver Setup dialog box
instructs you to connect the QL-500/
550, plug the connector on the USB
cable into the USB port on the back of
the QL-500/550.
The Driver Setup dialog box does not
appear if “Driver” is not selected in
Custom installation.