Instruction manual

136
EMBROIDERING AN EDITED PATTERN
Be sure to read the “Sewing” section in the “EMBROIDERY” chapter of this manual before carrying out
embroidery.
CAUTION
If using the medium or small embroidery frame, be sure to check the display on the layout screen
(refer to page 116) before doing any embroidering. If an incorrect embroidery frame is used, the
embroidery foot may touch the frame, or injury may result.
The pattern parts will be embroidered in the order that they were selected. Thus the order in this case will
be the one-point pattern and “HAPPY”, followed by the frame pattern.
1. Touch the “END EDIT” key. A screen such as the left will be
displayed. First, embroider the one-point pattern.
Embroider in the order shown by the color changes.
* For details on how to carry out embroidering, refer to pages
113 to 114.
2. Once embroidering is completed, a screen such as the left
will be displayed. Now embroider the word “HAPPY”.
* If the “MULTI COLOR” key is touched, the sewing machine
will stop after each character is embroidered, so that you
can sew each character in a different color.
3. Once embroidering is completed, a screen such as the left
will be displayed. Lastly, embroider the frame pattern.