Instruction manual

158
This message is displayed motor is locked.
This message is displayed when the machine finds that the
upper thread is cut.
This message is displayed when the embroidering unit is trying
to initialize while the embroidery foot is lowered.
This message is displayed when the “START/STOP” or
“AUTOMATIC THREAD CUTTER” button is pressed while the
presser foot or embroidery foot is raised.
This message is displayed if the “CARD” key is touched while
there is no memory card inserted into the slot.
Warning messages
ERROR MESSAGES
If the machine is not properly set and the “START/STOP” button is pressed, or a correction of your
operating procedure is required, the machine will not start and it will instruct you with an alarm and warning
message on LCD.