Instruction manual

53
4
1
2
6
5
3
Measure the button diameter + thickness to set
the plate.
Example: For a button with a diameter of 1.5
cm (9/16”) and a thickness of 1 cm
(3/8”), the scale should be set at 2.5
cm (1”)
1 Thickness [1 cm (3/8”)]
2 Diameter [1.5 cm (9/16”)]
3 Button holder plate
4 Scale
5 Diameter + thickness [2.5 cm (1”)]
[0.5 cm (3/16”) in one scale.]
6 0.5 cm (3/16”)
Buttons that do not fit into the guide plate (Odd-shaped buttons)
Changing the stitch length
321
Touch the “” and “” stitch length setting keys to adjust
the stitch length.
1 “”: Longer
2 Normal length 0.4 mm (1/64”)
3 “”: Shorter
* If the fabric will not feed (for instance, because it is too
thick), touch the “” stitch length setting key to increase
the stitch length.
Changing the stitch width
21
Touch the “” and “” stitch width setting keys to adjust
the stitch width.
1 “AUTO” width 5.0 mm (3/16”)
2 “” : Narrower