Instruction manual

PINTUCK

1. Mark along the folds on the reverse side of the fabric.

1 Reverse side

2. Turn the fabric and iron the folded parts only.

1 Surface

3. Select the “” stitch and then touch the “” key.

* It will not be necessary to adjust the thread tension if

pintucking is selected by pressing the “” key.

4. Put the right end of presser foot “I” into the holder, and sew

a straight stitch along the fold.

1 Width for pintuck

2 Reverse side

3 Surface

* When the automatic thread cutting and automatic

reinforcement stitch are preset, reinforcement stitches will

be sewn automatically at the start of sewing. Press the

“REVERSE STITCH” button to sew a reinforcement stitch

and trim the thread automatically at the finish of sewing.

Select the “” stitch and then touch the “” key.