Instruction manual

6
1
3
4
2
2A 1
0
9
876
5
4
3
2
1
1
J
III
III
A. MAIN POWER SWITCH AND CONNECTORS
1 Card slot
Slot for memory card insertion.
2 Main power switch
Use to turn on/off the main power.
3 Controller jack
Insert for foot controller operation.
4 Power cord
Use to connect machine to power supply.
CAUTION
– When leaving the sewing machine
unattended, the main switch of the
machine must be switched off or the plug
must be removed from the socket-outlet.
– When servicing the sewing machine, or
when removing covers or changing bulbs,
the machine or the electrical set must be
unplugged.
– For U.S.A. only
This appliance has a polarized plug (one
blade wider than the other). To reduce the
risk of electric shock, this plug is intended
to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not modify the plug in
any way.
B. FLAT BED ATTACHMENT WITH
ACCESSORY COMPARTMENT
I Tilt the lid of the accessory compartment
toward you to open.
II Each presser foot has a symbol.
1 Presser foot symbol
III ACCESSORY LIST
The location of each accessory is shown in figure
III.
1 Buttonhole foot “A” X57789-101
2 Embroidery foot “Q” XA2159-101
3 Overcasting foot “G” X51162-001
4 Monogramming foot “N” X53840-201
5 Zipper foot “I” X59370-051
6 Zigzag foot “J” 137748-101
7 Blind stitch foot “R” X56409-001
8 Seam ripper X54243-001
9 Button fitting foot “M” 130489-001
0 Bobbin 136492-101
A Needle set X58358-001
No. Part Name Part Code
* Always use the plastic bobbin which is supplied
with machine or in accessory compartment .
* Always use BROTHER accessories
recommended for this machine.