Instruction manual

SATIN STITCHES

1. Touch the “CHARACTER/DECORATIVE STITCH” key.

The different types of patterns available will be displayed.

2. Touch the “” key.

The satin stitch selection screen will be displayed.

* The thread may easily become knotted when certain types

of fabric or thread; therefore, the feed should be adjusted

according to the application.

1 Pattern selection keys

2 Touch this key to adjust the stitch width and stitch length

settings.

3 Touch this key to change the thread tension.

4 Touch this key to save a pattern combination to memory.

(Refer to page 94.)

5 Touch this key to select single or repeat sewing. (Refer to

page 89.)

6 Touch this key if you would like to change the pattern length

without changing the stitch width or stitch length settings.

(Refer to page 90.)

7 Touch this key to move the pattern up by about half of it’s

finished height when sewing. (Refer to page 92.)

8 Touch this key to move the pattern down by about half of it’s

finished height when sewing. (Refer to page 92.)

9 Touch this key to cancel your entry.

0 An advice screen will appear if you touch this key while

sewing. (Refer to page 39.)

A Touch this key to confirm your entry. (Refer to 94.)

3. Touch the pattern that you would like to use. The pattern

you touch will then be selected for use.

* If you select the wrong pattern by mistake, touch the

“CLEAR” key to clear the pattern selection.

* Up to 70 different patterns can be combined into a single

pattern.