P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Command Reference PJ-722/723/762/763/763MFi/773
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- What is P-touch Template?
- 1. Using P-touch Template
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^LS Specify line spacing with line feed
- ^CC Change prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXF2 FNC1 replacement setting
- ESC iXE2 Specify barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh1 Retrieve rotated print setting
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
P-touch Template Command Reference
- 5 -
2. P-touch Template Settings Tool User’s Guide
(1) Command mode setting
- P-touch Template mode (fixed)
To use P-touch Template, select the P-touch Template mode.
(2) Template number setting
Specify the template number selected as the default when the printer is turned on.
However, if any template has been set to not be transferred to the printer, the number of that template
cannot be specified.
(3) Delimiter setting
A delimiter is the symbol used to indicate when to move to the next object in the data that is being sent.
Between 1 and 20 characters can be specified.
(4) Print start trigger setting
Select one of the following three options for the print start trigger.
- Command Character
(Printing starts when the command character specified in (5) is received.)
- Data Insertion into All the Objects
(Printing starts when the delimiter for the last object is received.)
- Received Data Size
(Printing starts when the number of characters specified in (6) is received. However, delimiters are not
counted in the number of characters.)
(5) Print start command text string setting
Specify 1 to 20 characters.
(6) Print start data amount setting
The amount of data that must be received before printing can begin can be set between 1 and 999.
(7) Character code set setting
Select one of the following four character code sets. For character code tables, refer to “
Appendix B:
Character Code Tables”.
- Windows1252
- Windows1250
- Brother standard
- Windows 1251