P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Command Reference PJ-722/723/762/763/763MFi/773
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- What is P-touch Template?
- 1. Using P-touch Template
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^LS Specify line spacing with line feed
- ^CC Change prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXF2 FNC1 replacement setting
- ESC iXE2 Specify barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh1 Retrieve rotated print setting
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
P-touch Template Command Reference
- 21 -
4. P-touch Template Limitations
4.1.3 Text Layout settings
Character styles specified in P-touch Editor all become the same style within an object.
If the “Long text” is selected under “Text Layout” in P-touch Editor, the text is always aligned at top left.
If the “Long Text” setting is selected under “Text Layout” in P-touch Editor and continuous length tape is
used, the print length is increased to fit the text.
If the “Fixed Frame Size (Wrap)” setting is selected under “Text Layout” in P-touch Editor, the object size
does not change, and the text size is reduced.
“Fixed Frame Size (Wrap)” is a setting that was added for inserting long text. Since it is possible that the
text size may become extremely small if the wrapping feature is no longer applied, we recommend that
“Fixed Frame Size” be selected when die-cut labels or a fixed length is specified in P-touch Editor, or that
“Automatic Length” be selected when an automatic media length is specified.
Shrink to Fit
The text object size is fixed, and the text size is changed depending on the text
length.
Clip Text
The text object size is fixed, and the text size is fixed. If the text is too long, the text
is not printed.
Long Text
The text object width is fixed, and the text size is fixed. If the text is too long, the text
object height is increased.
Automatic
Length
The text object height is fixed, and the text size is fixed. If the text is too long, the
text object width is increased.
Free Size
The text size is fixed. If the text is too long, the text object width is increased. If a
new line is started, the text height is increased.
Specifying a Text Layout setting
Click the button circled in red to display a drop-down list, and then select the desired option.