P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Command Reference PJ-722/723/762/763/763MFi/773
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- What is P-touch Template?
- 1. Using P-touch Template
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^LS Specify line spacing with line feed
- ^CC Change prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXF2 FNC1 replacement setting
- ESC iXE2 Specify barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh1 Retrieve rotated print setting
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
P-touch Template Command Reference
- 24 -
4. P-touch Template Limitations
4.2.3 2D barcodes
QR Code
The version setting for a QR Code specified in P-touch Editor is invalid. The
version setting must be turned off.
The Structured Append settings specified in P-touch Editor are invalid.
PDF417
Since the error correction levels for PDF417 specified in P-touch Editor are
inconsistent with those on the printer, the size of the barcode may change when
it is printed with P-touch Template.
The Structured Append settings specified in P-touch Editor are invalid.
Data Matrix
The Structured Append settings specified in P-touch Editor are invalid.
Macro settings specified in P-touch Editor are invalid
Maxi Code
The Structured Append settings specified in P-touch Editor are invalid.
The barcode is partitioned when too much data is entered.
When specifying the country code and service class with P-touch Editor, the
number is entered at the beginning if the maximum number of characters is not
reached. However, with the printer, the number is entered at the end.
Example: “2” is specified.
P-touch Editor: “200”; Printer: “002”
Aztec
The Remove Character setting specified in P-touch Editor is invalid.
When the Number of Parts in the Set Structured Append setting is specified as
Auto, the number of appended blocks becomes 2.
The Code Spacing and Join Vertically in the Set Structured Append settings
specified in P-touch Editor are invalid.