P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Command Reference PJ-722/723/762/763/763MFi/773
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- What is P-touch Template?
- 1. Using P-touch Template
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^LS Specify line spacing with line feed
- ^CC Change prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXF2 FNC1 replacement setting
- ESC iXE2 Specify barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh1 Retrieve rotated print setting
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
P-touch Template Command Reference
- 35 -
7. Control Command Details
^PS Specify print start command text string
ASCII: ^ P S n1 n2 data
Decimal: 94 80 83 nd1 nd2 datad
Hexadecimal: 5E 50 53 nh1 nh2 datah
Parameters
0≤n1≤2
0≤n2≤9
00h≤datah≤FFh
Description
Specifies the text string for the print start command.
(n1*10)+n2:
Length of the text string (can be set between 1 and 20)
data:
Text string (The maximum number of characters that can be set is 20 characters
(bytes).)
The default text string for the print start command is “^FF”.
This command is a dynamic command.
Remarks
Invalid if more than 20 characters have been specified
Example
To change the text string for the print start command to “START”:
Since the text string to be specified (data), “START”, contains 5 characters, n1=0 and n2=5. Therefore, the
command will be as follows.
^ P S 0 5 S T A R T
(5Eh 50h 53h 30h 35h 53h 54h 41h 52h 54h)