P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Command Reference PJ-722/723/762/763/763MFi/773
- IMPORTANT - PLEASE READ CAREFULLY
- Introduction
- What is P-touch Template?
- 1. Using P-touch Template
- 2. P-touch Template Settings Tool User’s Guide
- 3. Examples for Using Commands
- 4. P-touch Template Limitations
- 5. Precautions
- 6. Control Code Lists
- 7. Control Command Details
- ^PT Select print start trigger
- ^FF Start printing
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Select template
- ^LS Specify line spacing with line feed
- ^CC Change prefix character
- ^RC Specify line feed command text string
- ^CN Specify number of copies
- ^QV Specify QR Code version
- ^FC FNC1 replacement setting
- ^II Initialize
- ^OP Perform printer operation (feed)
- ^SR Status request
- ^VR Retrieve version information
- ^CR Line feed in object
- ^OS Select object (object number)
- ^ON Select object (object name)
- ^DI Directly insert object
- ESC i a Select command mode
- ESC iXT2 Select print start trigger
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify non-printed text strings
- ESC iXi2 Select command mode
- ESC iXn2 Select template
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Select international character set
- ESC iXR2 Specify line feed command text string
- ESC iXC2 Specify number of copies
- ESC iXF2 FNC1 replacement setting
- ESC iXE2 Specify barcode margin setting
- ESC iXh2 Specify rotated print
- ESC iXT1 Retrieve print start trigger setting
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve non-printed text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve number of selected template
- ESC iXm1 Retrieve character code set setting
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve prefix character
- ESC iXR1 Retrieve line feed command setting text string
- ESC iXC1 Retrieve number of copies setting
- ESC iXF1 Retrieve FNC1 replacement setting
- ESC iXE1 Retrieve barcode margin setting
- ESC iXh1 Retrieve rotated print setting
- Appendix A: Specifications
- Appendix B: Character Code Tables
- Appendix C: Troubleshooting
- Appendix D: Introducing the Brother Developer Center
- brother US ENG
P-touch Template Command Reference
- 47 -
7. Control Command Details
^SR Status request
ASCII: ^ S R
Decimal: 94 83 82
Hexadecimal: 5E 53 52
Parameters
None
Description
Returns the printer status.
The printer status consists of 32 bytes.
Number
Offset
Size
Name
Value/Reference
1
0
1
Print head mark
Fixed at 80h
2
1
1
Size
Fixed at 20h
3
2
1
Brother code
Fixed at “B” (42h)
4
3
1
Series code
Fixed at “6” (36h)
5 4 1 Model code
PJ-722: Fixed at “6” (36h)
PJ-723: Fixed at “7” (37h)
PJ-762: Fixed at “8” (38h)
PJ-763: Fixed at “9” (39h)
PJ-763MFi: Fixed at “A” (41h)
PJ-773: Fixed at “B” (42h)
6
5
1
Country code
Fixed at “0” (30h)
7
6
1
Battery level information
Refer to table (5) below.
8
7
1
Not used
Fixed at 00h
9
8
1
Error information 1
Refer to table (1) below.
10
9
1
Error information 2
Refer to table (2) below.
11
10
1
Media width
Refer table (6) below.
12
11
1
Media type
Refer table (3) below.
13
12
1
Number of colors
Fixed at 00h
14
13
1
Media length (higher order bytes)
Fixed at 00h
15
14
1
Media sensor value
Fixed at 00h
16
15
1
Mode
Fixed at 01h
17
16
1
Density
Fixed at 00h
18
17
1
Media length (lower order bytes)
Fixed at 00h
19
18
1
Status type
Refer to table (4) below.
20
19
1
Phase type
Refer table (7) below.
21
20
1
Phase number (higher order bytes)
Fixed at 00h
22
21
1
Phase number (lower order bytes)
Fixed at 00h
23
22
1
Notification number
Not used
24
23
1
Expansion area (number of bytes)
Fixed at 00h
25
24
8
Reserved
Fixed at 00h