ESC/ P Legacy Command Reference
Table Of Contents
- ESC/P Legacy Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Legacy Commands
- 2. Examples of Using ESC/P Legacy Commands
- 3. ESC/P Legacy Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Paper feed commands
- 5.2 Print area setting commands
- 5.3 Tab setting commands
- 5.4 Print position setting commands
- 5.5 Character selection commands
- 5.6 Character style commands
- ESC x Select text quality
- SI, ESC SI Specify reduced characters
- DC2 Cancel reduced characters
- SO, ESC SO Specify auto-canceling double-width characters
- DC4 Cancel auto-canceling double-width characters
- ESC W Specify/cancel double-width characters
- ESC w Specify/cancel double-height characters
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC – Apply/cancel underlining
- ESC SP Specify character spacing
- ESC q Select character style
- ESC 4 Apply italic
- ESC 5 Cancel italic
- ESC ! Global formatting
- 5.7 Character definition commands
- 5.8 Supplemental function commands
- 5.9 Others
- 5.10 Advanced commands
- Appendix A: Character Code Tables
- Appendix B: Introducing the Brother Developer Center
- brother US ENG
ESC/P Legacy Command Reference
- 32 -
5. Control Command Details
ESC t Select character code table
ASCII: ESC t n
Decimal: 27 116 n
Hexadecimal: 1B 74 n
Function
Selects the character table for character codes 128 through 255.
Details
n = 00h: Select italic characters
n = 01h: Select advanced graphics (default)
* Precautions
Graphics characters (B0h through DFh and F0h through FEh of the advanced graphics code table) are
printed as normal characters.