ESC/ P Legacy Command Reference
Table Of Contents
- ESC/P Legacy Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Legacy Commands
- 2. Examples of Using ESC/P Legacy Commands
- 3. ESC/P Legacy Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Paper feed commands
- 5.2 Print area setting commands
- 5.3 Tab setting commands
- 5.4 Print position setting commands
- 5.5 Character selection commands
- 5.6 Character style commands
- ESC x Select text quality
- SI, ESC SI Specify reduced characters
- DC2 Cancel reduced characters
- SO, ESC SO Specify auto-canceling double-width characters
- DC4 Cancel auto-canceling double-width characters
- ESC W Specify/cancel double-width characters
- ESC w Specify/cancel double-height characters
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC – Apply/cancel underlining
- ESC SP Specify character spacing
- ESC q Select character style
- ESC 4 Apply italic
- ESC 5 Cancel italic
- ESC ! Global formatting
- 5.7 Character definition commands
- 5.8 Supplemental function commands
- 5.9 Others
- 5.10 Advanced commands
- Appendix A: Character Code Tables
- Appendix B: Introducing the Brother Developer Center
- brother US ENG
ESC/P Legacy Command Reference
- 33 -
5. Control Command Details
ESC R Select international character set
ASCII: ESC R n
Decimal: 27 82 n
Hexadecimal: 1B 52 n
Function
Changes a part of the alphanumeric character code table according to the value of n.
Details
00h USA
01h France
02h Germany
03h UK
04h Denmark
05h Sweden
06h Italy
07h Spain
08h Japan
09h Norway
0Ah Denmark II
0Bh Spain II
0Ch Latin America
0Dh Korea
40h Legal