ESC/ P Legacy Command Reference
Table Of Contents
- ESC/P Legacy Command Reference
- IMPORTANT - PLEASE READ CAREFULLY
- Contents
- Introduction
- What is ESC/P?
- 1. Using ESC/P Legacy Commands
- 2. Examples of Using ESC/P Legacy Commands
- 3. ESC/P Legacy Command Limitations
- 4. Control Code List
- 5. Control Command Details
- 5.1 Paper feed commands
- 5.2 Print area setting commands
- 5.3 Tab setting commands
- 5.4 Print position setting commands
- 5.5 Character selection commands
- 5.6 Character style commands
- ESC x Select text quality
- SI, ESC SI Specify reduced characters
- DC2 Cancel reduced characters
- SO, ESC SO Specify auto-canceling double-width characters
- DC4 Cancel auto-canceling double-width characters
- ESC W Specify/cancel double-width characters
- ESC w Specify/cancel double-height characters
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC – Apply/cancel underlining
- ESC SP Specify character spacing
- ESC q Select character style
- ESC 4 Apply italic
- ESC 5 Cancel italic
- ESC ! Global formatting
- 5.7 Character definition commands
- 5.8 Supplemental function commands
- 5.9 Others
- 5.10 Advanced commands
- Appendix A: Character Code Tables
- Appendix B: Introducing the Brother Developer Center
- brother US ENG
ESC/P Legacy Command Reference
- 41 -
5. Control Command Details
ESC ! Global formatting
ASCII: ESC ! n
Decimal: 27 33 n
Hexadecimal: 1B 21 n
Function
Specifies the print mode for alphanumeric characters.
Details
The individual settings are specified according to the description for each command.
With the n values listed below for each of the commands,
the added values only for global formatting are specified.
n value Setting Corresponding command
00h 10 cpi ESC P
01h 12 cpi ESC M
02h Proportional ESC p
04h Reduced SI, DC2
08h Bold (emphasized) ESC E, ESC F
10h Double-strike printing ESC G, ESC H
20h Double width ESC W
40h Italics ESC 4, ESC 5
80h Underline ESC -