User's Manual

Changing the Printer Settings
69
3
7 Skip Perforation
Leaves a one-inch (25.4 mm) margin at the top and bottom of the paper.
Use it when printing on perforated roll paper so that the printer does not print on the perforation.
Available settings: [Enable], [Disable]
8 Dash Line Print
Prints dash lines between pages, useful when printing on roll paper. Set [Form Feed Mode] to [Fixed
Page], and then select [Enable]. Note that dash lines are printed on the paper; they are not punched into
the paper.
Available settings: [Enable], [Disable]
9Tear Adjust
Adjust the tear bar tear off position for paper media.
Available settings: [+0.08"], [+0.06"], [+0.04"], [+0.02"], [0"], [-0.02"], [-0.04"], [-0.06"], [-0.08"]
([+2.0 mm], [+1.5 mm], [+1.0 mm], [+0.5 mm], [0mm], [-0.5 mm], [-1.0 mm], [-1.5 mm], [-2.0 mm])
Note
For the following settings, the printer driver settings have priority:
•Print Density
• Print Speed
• Dash Line Print