Operation Manual

100
l
Touch .
m
Touch the positioning keys to move the embroidery
frame until the embroidery crosshair positioning laser
is aligned with the mark in the reference direction.
To change the speed that the frame moves, use the
frame movement speed keys. If it is difficult to make a
precision alignment, touch a frame movement speed
key for a slower speed.
1 Positioning keys
2 Frame movement speed keys
3 Reference direction of mark
4 Embroidery crosshair positioning laser
n
Touch .
 The pattern is repositioned.
o
Touch .
p
Touch , and then press the “Start/Stop”
button to start embroidering.
■ Another example
By specifying an alignment point and direction,
embroidery patterns can be positioned and aligned for
various purposes.
In this example, a pattern is aligned at the left center of the
towel.
a
Use a chalk pencil to mark the desired embroidering
position.
The line drawn for the reference direction should be
longer.
1 Chalk pencil mark
b
Hoop the fabric in the embroidery frame.
Note
• Do not set the position of the embroidery crosshair
positioning laser too close to the center of the
mark. If it is too close, a message will appear,
prompting you to reposition it.
• For best accuracy, set the position of the
embroidery crosshair positioning laser on the
reference direction of mark (3) as far away from
the center of the mark as possible.
1
2
c
d
a