Operation Manual

ADVANCED EMBROIDERY
121
3
Embroidering split (large-size) patterns
Split (large-size) patterns created with PE-DESIGN version 7 or
later, or PE-DESIGN NEXT can be embroidered. With large-
size patterns, embroidery designs larger than the embroidery
hoop are divided into multiple sections, which combine to
create a single pattern after each section is embroidered.
For details on creating large-size embroidery patterns and for
more detailed embroidering instructions, refer to the manual
included with PE-DESIGN version 7 or later, or PE-DESIGN
NEXT.
The following procedure describes how to read the large-size
embroidery pattern shown below from USB media and
embroider it.
a
Connect to the machine the media containing the
created large-size embroidery pattern, and then select
the large-size embroidery pattern to be embroidered.
* For details on retrieving patterns, refer to page 116.
 A screen appears so that a section of the large-size
embroidery pattern can be selected.
b
Select section to be embroidered, then touch
.
• Select the sections in alphabetical order.
c
If necessary, edit the pattern. Then, touch .
• For details, refer to “EDITING THE EMBROIDERY
PATTERN” on page 46.
d
Confirm the pattern size, and then select the
appropriate fabric and the embroidery frame.
• Be sure to select fabric of the size of combined
pattern.
e
Hoop the appropriate part of the fabric. In this case,
hoop upper-left part of the fabric.
EMBROIDERY APPLICATIONS
1 Center of fabric