Operation Manual

ADVANCED EMBROIDERY
125
3
Winding the bobbin
Prepare the bobbin and the spool of bobbin thread. Use
cotton or spun polyester bobbin thread (from 74 dtex/2 to 100
dtex/2).
a
Align the groove in the bobbin with the spring on the
bobbin winder shaft, and set the bobbin on the shaft.
1 Groove in the bobbin
2 Spring on the shaft
b
Set the thread spool on the spool pin.
1 Thread spool
2 Spool pin
c
Pass the thread through the hole in the left of the
thread guide toward the front of the winder.
1 Hole in the thread guide
d
Pass the thread around the tension disc as shown in the
illustration. Make sure that the thread is correctly fed
into the tension disc.
1 Tension disc
e
Pass the thread through the hole in the right of the
thread guide toward the back of the machine.
1 Hole in the thread guide
Note
• When using a small spool, remove the spool
cushion and set the spool directly onto the spool
pin. Also use the included spool cap to keep the
small spool stable.