Operation Manual

APPENDIX

155

If the machine does not respond when a key

is touched

If nothing happens when a key on the screen is touched (no

key can be selected or the keys are misaligned), adjust the

touch panel as described below.

Touch anywhere inside the touch panel, and turn the

machine off, then on again.

• Continue touching the touch panel until the screen

shown below appears.

• The “Start/Stop” button is red.

 The adjustments screen appears.

Use the included touch pen to touch the center of the

numbered crosses on the screen, in numerical order

from 1 to 13.

After making the necessary touch panel adjustment,

[SUCCESS] will show on the screen.

• If the buzzer sounds when cross number 13 is

touched, an error occurred during setting, and

[ERROR] appears on the screen. Touch the crosses

again, starting with the number indicated on the

screen.

Turn the machine off, and on again.

CAUTION

• Be sure to use the included touch pen to adjust

the touch panel. Do not use a mechanical

pencil, screwdriver or any other hard or sharp

object. Do not apply pressure to the LCD

screen display, otherwise damage to the

display may result.

Note

• If the keys still do not respond, even after the touch

panel is adjusted, or if the touch panel cannot be

adjusted, contact your nearest authorized Brother

dealer.