Operation Manual

ADVANCED EMBROIDERY
93
3
Basting embroidery
Before embroidering, basting stitches can be embroidered
along the outline of the pattern. This is useful for
embroidering fabric that cannot have stabilizer material
affixed with an iron or adhesive. By stitching stabilizer
material to the fabric, shrinkage of the stitching or misaligned
patterns can be minimized.
a
Touch .
 The embroidery settings screen appears.
b
Locate [Basting Distance] in the Settings pages.
c
Use and to specify the distance from the
pattern to the basting stitching.
d
Touch to return to the embroidering settings
screen.
e
Touch to select the basting setting.
• To cancel the setting, touch .
 Basting is added to the beginning of the
embroidering order.
f
Touch to continue to the embroidering screen.
g
Touch , and then press the “Start/Stop”
button to begin embroidering.
h
When embroidering is finished, remove the basting
stitching.
1 Basting stitching
Chapter 3
ADVANCED
EMBROIDERY
VARIOUS EMBROIDERY
FUNCTIONS
Note
• It is recommended to finish combining and editing
the pattern before selecting the basting setting. If
the pattern is edited after selecting the basting
setting, the basting and pattern may become
misaligned, and the basting under the pattern may
be difficult to remove after embroidering is
complete.
Memo
• The higher the setting, the farther the basting is
from the pattern.
• The setting remains selected even if the machine is
turned off.
Note
• When is touched, the pattern is moved to the
center. After selecting the basting setting, move the
pattern to the desired position.