User`s guide
Table Of Contents
- Mobile Print/Scan Guide for Brother iPrint&Scan
- Definitions of notes
- Trademarks
- Table of Contents
- For Android™ Devices
- For iOS Devices
- 4 Introduction
- 5 Printing
- 6 Scanning
- For Windows® Phone Devices
- brother ENG
Printing
85
8
g Make sure your machine is selected.
Do one of the following:
If your machine is selected, go to step j.
If a different machine is selected or if Device Is Not Selected is displayed, make sure your machine
is turned on and then tap Printer. Go to step h.
h Tap .
Note
If the machine was used previously, you can select the machine from the device list.
i Enter your machine’s IP address, and then tap Connect.
The machine’s model name is displayed when the machine is found. Tap the machine to select it.
Note
You can see your machine’s IP address in the Network menu on the control panel of your machine. For
more details, please refer to your machine’s Network User’s Guide.
j Do one of the following:
If you want to change other print settings, see Print Settings uu page 88. After changing the settings,
go to step k.
If you do not want to change any settings, press the Back button and go to step k.
k Tap .
The machine will start printing.