EL LABELING C I N O R T EC SYSTEM INTRODUCTION Please visit us at http://solutions.brother.com/ where you can get product support and answers to frequently asked questions (FAQs).
INTRODUCTION Thank you for purchasing the P-touch labeler PT-H300/H300LI. Your new P-touch labeler is an easy to operate, feature packed labeling system that makes creating professional, high quality labels a breeze. This manual contains various precautions and basic procedures for using this labeler. Read this manual carefully before using and keep in a handy place for future reference.
Brother® Two-Year Limited Warranty and Replacement Service (USA Only) Who is covered: • This limited warranty ("warranty") is given only to the original end-user/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product").
What Brother will do: If the problem reported concerning your Machine and/or accompanying Consumable and Accessory Items is covered by this warranty and if you first reported the problem to Brother or an Authorized Service Center within the applicable warranty period, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Items at no charge to you for parts or labor.
Limitations: Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of the machine. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you.
Important Information Should you have questions, or need information about your Brother Product, we have a variety of support options for you to choose from: USA-Customer Service: Customer Service 1-877-BROTHER (877-276-8437) Customer Service 1-901-379-1210 (fax) World Wide Web www.brother-usa.com Supplies / Accessories www.brothermall.com or 1-877-552-MALL (6255) BROTHER INTERNATIONAL CORPORATION 200 CROSSING BOULEVARD BRIDGEWATER, N.J.
Safety Precautions ........................................................................................................ 3 General Precautions.................................................................................................... 10 Symbols Used in this Guide ........................................................................................ 11 How to use the P-touch labeler ...................................................................................
INTRODUCTION Setting Auto Fit Style .............................................................................................34 Setting Label Attributes ................................................................................................34 Using Auto-Format Layouts .........................................................................................38 Using Templates - Example creating an Asset Tag...............................................38 Using Block Layouts .....................
To prevent injury and damage, important notes are explained using various symbols. The symbols and their meanings are as follows: DANGER WARNING CAUTION Indicates an imminently hazardous situation which, if the product is handled without following the warnings and instructions, will result in death or serious injuries. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries.
INTRODUCTION DANGER Rechargeable Li-ion Battery (The rechargeable Li-on battery comes with the PT-H300LI. Li-ion battery optional with the PT-H300).
Rechargeable Li-ion Battery (The rechargeable Li-on battery comes with the PT-H300LI. Li-ion battery optional with the PT-H300). Liquid (electrolyte) leaking from the labeler or rechargeable battery may indicate that the rechargeable battery is damaged. If the rechargeable battery leaks, immediately discontinue use of the printer, unplug the AC adapter, and isolate the printer by putting it in a bag. Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes.
INTRODUCTION WARNING P-touch Labeler Follow these guidelines to avoid fire, electric shock, the risk of injury to yourself or others, and/or damage to the printer or other property. DO NOT allow the printer to get wet or use the printer in areas that may become wet, such as bathrooms or near sinks. DO NOT touch any metal parts near the print head. The print head becomes very hot during use and remains very hot immediately after use. Do not touch it directly with your hands.
AC Adapter Follow these guidelines to avoid fire, damage, electric shock, failure or the risk of injury. Make sure that the plug is fully inserted in the power outlet. Do not use an outlet that is loose. Always use the specified AC adapter, and always plug the AC adapter into an electrical outlet with the specified voltage (120V). Failure to do so may result in injury to yourself or others, or damage to the printer or other property.
INTRODUCTION CAUTION Alkaline batteries/Ni-MH rechargeable batteries Follow these guidelines to avoid liquid leakage, overheating or rupture of the battery. DO NOT use a battery other than the one specified for use with your printer. Do not use combinations of old and new batteries or combinations of different types, different charging levels, different manufacturers or different models. Do not insert a battery with the polarity (+ and -) reversed.
P-touch Labeler Follow these guidelines to avoid minor personal injury and damage to the P-touch labeler. Store the P-touch labeler on a flat, stable surface such as a desk or in a drawer. DO NOT leave the P-touch labeler or any tape within the reach of young children. DO NOT place any heavy objects on top of the P-touch labeler. Always use the suggested AC adapter (AD-E001) for the P-touch labeler and plug it into an outlet with the specified voltage.
INTRODUCTION General Precautions Rechargeable Li-ion battery • At the time of purchase, the rechargeable Li-ion battery is slightly charged so that the operation of the labeler can be verified; however, the rechargeable Li-ion battery should be fully charged with the AC adapter before the labeler is used.
z INTRODUCTION • DO NOT expose the tape cassettes to direct sunlight, high temperatures, high humidity, or dust. Store tape cassettes in a cool, dark place. Use the tape cassettes soon after opening the tape cassette package. • Markings made with oil-based or water-based ink may be visible through a label affixed over them. To hide the markings, use two labels layered on top of each other or use a darkcolored label.
INTRODUCTION How to use the P-touch labeler Create a label with the P-touch labeler 1 GETTING STARTED • Prepare the P-touch labeler. P. 13 2 CREATING A LABEL • Entering and Editing text. P. 25 • Entering Symbols. P. 27 • Entering Accented Characters. In addition to entering text, the P-touch labeler has a large range of formatting options. Create labels like these : P. 30 • Using Auto-Format Layouts. P. 38 3 LABEL PRINTING • Printing a label. P. 47 • Setting Margin. P.
GETTING STARTED Check that the package contains the following before using your P-touch labeler. PT-H300 P-touch labeler Batteries z GETTING STARTED Unpacking Your P-touch labeler Strap Starter Tape Cassette User’s Guide PT-H300LI P-touch labeler AC adapter 1 The plug may differ by countries.
GETTING STARTED General Description Tape exit slot Cover latch Tape cassette compartment Tape cutter LCD display Tape cutter lever Keyboard Print head Release lever When shipped from the factory, the LCD display is covered with a protective sheet to prevent damage. Remove this sheet before using the P-touch.
LCD Display 9 10 11 12 13 14 1 2 3 5 6 4 7 8 15 16 17 1. Line number Indicates line number within the label layout. 2. Shift Mode Indicates shift mode is on. 3. Start Line / 4. End Line The area between the start and end line will be printed. The short lines extending from the start/ end lines show the end of the label layout. 5. Block Separator Line Indicates the end of a block. 6. Cursor Characters are entered to the left of the cursor. Indicates the current data input position. 7.
GETTING STARTED Key Names and Functions The default language is "English". 1. Power Turns the P-touch labeler on and off. 2. Print Options Enables Numbering or Mirror to be selected and printed. 3. File Enables frequently used labels in the file memory to be printed, opened, saved, or deleted. 4. Preview Displays a preview of the label. 5. Print Prints the current label design onto the tape. 16 LCD Display & Keyboard 6. Font • Enables character attributes for the label to be set.
18. Shift Use this key in combination with the letter and number keys to type uppercase letters or the symbols indicated on the number keys. 19. Caps Turns Caps mode on and off. 20. Accent Use this to select and enter an accented character. 21. Space • Enters a blank space. • Returns a setting to the default value. 22. Bar Code Opens Bar Code Setup screen. 23. Enter • Enters a new line when entering text. • Enters a new block when used in combination with the Shift key. z GETTING STARTED 11.
GETTING STARTED Power Supply Battery 1 After making sure that the power is off, remove the rear cover on the back of the machine. If the batteries are already in the machine, remove them. Make sure that the power is turned off when replacing batteries.
z GETTING STARTED AC Adapter (AD-E001: Optional on the PT-H300) Use AD-E001 (AC adapter) for this labeler. AD-18 or AD-24ES cannot be used. Connect the AC adapter directly to the P-touch labeler. 1 Insert the plug on the AC adapter cord into the connector marked DC IN 12V on the P-touch labeler. 2 Insert the AC adapter plug into a standard electrical outlet. • Turn the P-touch labeler off before disconnecting the AC adapter. • Do not pull or bend the AC adapter cord.
GETTING STARTED Using the Rechargeable Li-ion Battery (BA-E001: Optional on the PT-H300) Installing the Rechargeable Li-ion Battery 1 Open the rear cover by pressing the cover latch. Cover latch Rear cover 2 Insert the rechargeable Li-ion battery into the battery compartment. 3 Confirm that the hooks on the edge of the rear cover are inserted correctly, and then reattach the cover.
Tips on Using the Rechargeable Li-ion Battery • Charge the rechargeable Li-ion battery before use. Do not use it before it is charged. • The rechargeable Li-ion battery charging can take place in 41°F-95°F (5°C-35°C) environments. Charge the rechargeable Li-ion battery in an environment in this temperature range. If the surrounding temperature is out of this range, the rechargeable Li-ion battery will not be charged, and the battery indicator will remain lit.
GETTING STARTED Inserting a Tape Cassette Tape cassettes of 0.13", 0.23", 0.35", 0.47" or 0.70" (3.5mm, 6mm, 9mm, 12mm or 18mm) width can be used in your P-touch labeler. Use only Brother tape cassettes with the mark. If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette. 1 Check that the end of the tape is not bent and that it passes End of tape through the tape guide.
Press the Power key to turn the P-touch labeler on. Press the Power key again to turn the P-touch labeler off. • Your P-touch labeler has a power saving function that automatically turns itself off if no key is pressed within a certain time under certain operating conditions. Refer to the Auto Power-Off Time table below for details.
GETTING STARTED Back Light You can change the back light setting either to ON or OFF. The display is easier to see with the back light ON. The default setting is "ON". 1 Press the Menu key to display the Setup menu, select "Backlight" using the key, and then press the OK or Enter key. 2 Select "ON" or "OFF" using the 3 Press the OK or Enter key. or or key. • Power can be saved when the back light is turned off.
EDITING A LABEL Entering Text from the Keyboard • The keyboard of your P-touch labeler can be used in the same way as a standard computer keyboard. Using Text Reminder z EDITING A LABEL Entering and Editing Text When a character is entered, the machine remembers character sequences beginning with the character entered from a history of all printed character sequences to date, and displays a list of options from which to select. 1 Enter "c".
EDITING A LABEL Adding a New Line • To end the current line of text and start a new line, press the Enter key. A return mark appears at the end of the line and the cursor moves to the start of the new line. • There is a maximum number of lines of text that can be entered for each tape width. A maximum of 5 lines for 0.70" (18mm) tape, 3 lines for 0.47" (12mm) tape, 2 lines for 0.35" (9mm) and 0.23" (6 mm) tape, and 1 line for 0.13" (3.5mm) tape.
z EDITING A LABEL 2 Using the or key, select “Text Only” to delete all text while retaining the current format settings, or select “Text & Format” to delete all text and format settings. Press the Escape key to return to the text entry screen, without erasing (or clearing) text or format. 3 Press the OK or Enter key. All text is deleted. All format settings are also deleted if Text & Format was selected.
EDITING A LABEL Using Symbol History You can create your personal category of symbols by using the Symbol History. The "History" will appear first when selecting the symbols to help you locate the desired symbols quickly. 1 Press the Menu key to display the Setup menu, and then select "Symbol History" using the or key. 2 Press the OK or Enter key to display the Symbol History screen, and then select "On" to create your personal category by using the or key.
z EDITING A LABEL zSymbol Listz Category Punctuation Symbols Bracket/Arrow Mathematics Currency/Unit (Number) [Number] Sign Electrical Datacom/AV 1 Business 2 Professional 3 Event 4 Vehicle 5 6 Personal 7 Nature/Earth 8 9 Entering Symbols 29
EDITING A LABEL Category Symbols Pictograph The symbols shown in the table may look slightly different on the machine LCD and when printed. Entering Accented Characters The P-touch labeler can display and print a set of accented characters such as other language specific characters. 1 Enter the character you wish to change to an accented character. Caps mode can be used with the Accent function. 2 Press the Accent key. The character you entered will change to an accented character.
Character a A c C d D e E g G i I k K l L Accented Characters Character n N o O r R s S t T u U y Y z Z Accented Characters z EDITING A LABEL zAccented Character Listz Setting Character Attributes Setting Character Attributes by Label Using the Font key, you can select a font and apply size, width, style, line, and alignment attributes. 2 1 Press the Font key. The current settings are displayed. 2 Select an attribute using the the or key. 3 Press the OK or Enter key to apply the settings.
EDITING A LABEL Setting Character Attributes by Each Line When a label consists two or more lines of text, you can set different value of character attributes (font, size, width, style, line and alignment) for each line. Move the cursor to the line you wish to change the character attribute by using the , , or key. Next, press the Shift key and then press the Font key to display the attributes. ( on the screen indicates that you are now applying the attribute for that specific line only.
Size Value Result Value 36pt 12pt 24pt 9pt 18pt 6pt x2 x2/3 x1 x1/2 Result z EDITING A LABEL Attribute Width Normal BLD (Bold) Style OUT (Outline) SHD (Shadow) SLD (Solid) I+BLD (Italic Bold) I+OUT (Italic Outline) I+SHD (Italic Shadow) I+SLD (Italic Solid) 1 VRT (Vertical) 2 ITL (Italic) Off Line Align (Alignment) 3 4 UND (Underline) 5 STR (Strikeout) 6 Left Right 7 Center Just (Justify) 8 9 Setting Character Attributes 33
EDITING A LABEL • The actual printed font size depends on the tape width, number of characters and number of input lines. Once characters reach a minimum size, the selected font will default to a custom font which is based on the Helsinki style. This allows labels to print using the smallest text possible on narrow or multi-line labels. • The 6 point font only prints in Helsinki, no other font type.
zFramesz Attribute Value Result Value Result z EDITING A LABEL • Press the Escape key to return to the previous step. • Press the Space key to set the selected attribute to the default value. • Refer to the Setting Options table for a list of all available settings.
EDITING A LABEL Attribute Value Result Value 32 50 33 51 34 52 35 53 36 54 37 55 38 56 39 57 40 58 41 59 42 60 43 61 44 62 45 63 46 64 47 65 48 66 49 67 Frame 36 Setting Label Attributes Result
Result Value Result z EDITING A LABEL Attribute Value 68 84 69 85 70 86 71 87 72 88 73 89 74 90 75 91 76 92 77 93 78 94 79 95 80 96 81 97 4 82 98 5 83 99 Frame Length 1 2 3 6 The length of the label can be set within the range 1.2" (30 mm) - 12.0" (300 mm). When Auto is selected, the length of the label is automatically adjusted based on the amount of text entered.
EDITING A LABEL Using Auto-Format Layouts Using the Auto-Format function you can quickly and easily create labels for a variety of purposes, such as file tabs, equipment labels, name badges, etc. Simply select a layout from the templates or block layouts, enter the text and apply formatting as desired. Symbols and accented characters can also be used in auto-format layouts.
Enter the text and then press the OK or Enter key. Repeat this for each text field. After all text fields are entered, the print menu is displayed when the OK or Enter key is pressed. 10 Select "Print" using the the Copies screen. • • • • or key and then press the OK or Enter key to display z EDITING A LABEL 9 Select "Edit" to change the text data or style settings. Select "Save" to store the label in a file memory. Select "Cancel" to exit the Auto-Format function.
EDITING A LABEL zTemplatesz Attribute Value Details Flag 1 (0.47" x 3.5" [12mm x 90mm]) Flag 2 (0.47" x 3.5" [12mm x 90mm]) Cable Wrap (Rotate & repeat) (0.70" x 1.5" [18mm x 39mm]) Faceplate (0.47" x 2.7" [12mm x 70mm]) Binder Spine Template Name File Folder Tab Divider Tab (Hanging Folder) (0.70" x 8.6" [18mm x 219mm]) (0.47" x 3.2" [12 mm x 82 mm]) (0.47" x 1.6" [12 mm x 42 mm]) Asset Tag (0.70” x 2.7” [18 mm x 70 mm]) Bin Box (0.70" x 3.0" [18 mm x 76 mm]) Equipment Label (0.70" x 2.
Value Details Address Label (0.70" x 2.7" [18 mm x 70 mm]) Template Name z EDITING A LABEL Attribute Name Badge (0.70" x 2.8" [18 mm x 72 mm]) CD Case Spine 1 (0.23" x 4.4" [6 mm x 113 mm]) CD Case Spine 2 (0.13" x 4.4" [3.5 mm x 113 mm]) Using Block Layouts 1 Press the Auto-Format key to display the Auto-Format screen, and then select “Block Layouts” using the or key. 2 Press the OK or Enter key to display the Tape Width screen, and then select a tape width using the or key.
EDITING A LABEL 7 Press the OK or Enter key. The block layout text entry screen is displayed. Caps mode can be used when entering text. 8 Enter text and then press the OK or Enter key. Repeat for each text field. After all text fields are completed, press the OK or Enter key to display the print menu. 9 Select "Print" using the the Copies screen. • • • • • or key and then press the OK or Enter key to display Select "Edit" to change the text data or style settings.
z EDITING A LABEL zBlock Layoutsz Attribute Value Details 2LineA 2LineB 3Line Block layout (0.70" [18 mm] tape) 1+2LineA 1+2LineB 1+3Line 1+4Line 1+5Line 2LineA Block layout (0.47" [12 mm] tape) Block layout (0.35" [9 mm] tape) 1 2LineB 2 3Line 3 1+2Line 4 2LineA 5 6 2LineB 7 1+2Line Block layout (0.
EDITING A LABEL Creating a Bar Code Label Using the Bar Code function you can create labels with one dimensional bar codes for use with cash registers, stock control systems or other bar code reader systems, or even asset control tags used in an asset management system. • The P-touch labeler is not designed exclusively for creating bar code labels. Always check that bar code labels can be read by the bar code reader. • For best results, print bar code labels in black ink on white tape.
Select a character using the or key, then press the OK or Enter key to insert the character in the bar code data. 7 Press the OK or Enter key to insert the bar code in the label. The bar code is displayed on the text entry screen. • • • • z EDITING A LABEL 6 The "C.Digit" (Check Digit) attribute is only available for the CODE39, I-2/5 and CODABAR protocols Press the Escape key to return to the previous step. Press the Space key to set the selected attribute to the default value.
EDITING A LABEL CODE128, GS1-128 (UCC / EAN-128) Code Special Character Code Special Character Code Special Character 0 (SPACE) 24 48 DC3 1 25 49 DC4 2 26 50 NAK 3 27 51 SYN 4 28 NUL 52 ETB 5 29 53 CAN 6 30 SOH 54 EM 7 31 STX 55 SUB 8 32 ETX 56 ESC 9 33 EOT 57 10 34 ENQ 58 FS 11 35 ACK 59 12 36 BEL 60 GS 13 37 BS 61 14 38 HT 62 RS 15 39 LF 63 16 40 VT 64 US 17 41 FF 65 DEL 18 42 CR 66 FNC3 19 43 SO 67 FNC2 20 44 SI 68 FNC4 21 45 DLE 69 FNC1 22 46 DC1 23 47 DC2 Editing and Deleting a Bar Code • To edit bar
LABEL PRINTING z LABEL PRINTING Label Preview Using the Preview function you can check the layout of the label before printing. 1 Press the Preview key. An image of the label is displayed on the screen. The length of the label is shown in the lower-right corner of the screen. Press the or key to scroll the preview to the left or right. Press the or key to change the magnification of the preview. • Press the Escape, OK or Enter key to return to the text entry screen.
LABEL PRINTING 3 Press the OK or Enter key. "Printing...Copies" is displayed while the labels are being printed. • Press the Escape key to return to the previous step. • The figures shown on the screen during printing indicate the “count / number of copies set”. • Pressing the Space key when setting the number of copies resets the value to 1, the default. Auto-numbering Labels Using the numbering function you can create a set of sequentially numbered labels from a single label format.
• • • • Press the Escape key to return to the previous step. The figures shown on the screen during printing indicate the “count / number of copies”. Pressing the Space key when selecting the number of copies resets the value to 1, the default. Auto-numbering can also be applied to bar codes. When a bar code contains an auto-numbering sequence, no other fields in the label can contain an auto-numbering sequence. The auto-number portion of the label is incremented after each label is printed.
LABEL PRINTING Setting Margin The tape cutting options allow you to specify how the tape is fed and cut when printing labels. In particular, the “Chain” options greatly reduce the amount of wasted tape by using smaller margins and eliminating blank sections cut between labels. 1 Press the Label key to display the Label menu. 2 Select "Margin" using the key. 3 Press the OK or Enter key to apply the settings.
Chain Description • Use this setting when printing several labels with minimum margins. • Feed the tape before using the cutter. Otherwise a part of the text may be cut off. Do not try to pull the tape since this may damage the tape cassette. • After pressing Print, “OK to Feed?” appears. Press the Escape key to enter more texts or press the OK or Enter key to feed. • The final label is printed with an 0.37" (9.5 mm) margin to the right of the characters.
LABEL PRINTING • The backing of some types of tapes may be pre-cut to make it easier to peel the backing.To remove the backing, simply fold the label lengthwise with the text facing inward, to expose the inside edges of the backing. Next, peel off the backing one piece at a time. • Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these surfaces.
z LABEL PRINTING zLabel Collection Listz Category Label Files Office Signage Communication 1 2 Attention 3 4 Retail 5 6 * Labels are for illustrative purposes only.
USING THE FILE MEMORY You can store up to 50 of your most frequently used labels in the file memory. Each label is stored as a file, allowing you to quickly and easily recall your label when needed again. When the file memory is full, each time you save a file you will need to overwrite one of your stored files. Storing a Label into Memory 1 After entering the text and formatting the label, press the File key to display the File screen. 2 Select "Save" using the 3 Press the OK or Enter key.
z USING THE FILE MEMORY Printing a Stored Label File 1 Press the File key to display the File screen. 2 Select "Print" using the 3 Press the OK or Enter key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the to display the Copies screen. 5 Select the number of copies to be printed using the using the number keys. 6 Press the OK or Enter key to print the labels. "Printing...
RESETTING & MAINTAINING YOUR P-TOUCH LABELER Resetting the P-touch Labeler You can reset the internal memory of your P-touch labeler when you want to clear all saved label files, or in the event the P-touch labeler is not operating correctly. Resetting the data to factory settings (Label collections stored in Favorites is not reset.) Turn off the machine. Press and hold down the Shift and R keys. While holding down the Shift and R keys, press the Power key once and then release the Shift and R keys.
Your P-touch labeler should be cleaned on a regular basis to maintain its performance and life span. Always remove the batteries and disconnect the AC adapter before cleaning the P-touch labeler. Cleaning the Unit Wipe any dust and marks from the main unit using a soft, dry cloth. Use a slightly dampened cloth on difficult to remove marks. Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the case or damage the appearance of your P-touch labeler.
TROUBLESHOOTING What to do when... Problem The screen ‘locks’, or the P-touch labeler does not respond normally. The display remains blank after turning on the power. Solution Refer to “Resetting the P-touch Labeler” on page 56 and reset the internal memory to the initial settings. If resetting the Ptouch labeler does not solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
When an error message appears on the display, follow the directions provided below. Message Wrong Type Of Adapter Connected! Low Battery! Replace Battery! Recharge Li-ion Battery! Li-ion is damaged Use other power source! Unit Cooling Wait 10 min. before restart! Cutter Error! Insert Tape Cassette! Text Full! No Text! Line Limit! Max 5 Lines Incorrect Value! Tape Width Limit! Max 3 Lines Tape Width Limit! Max 2 Lines Tape Width Limit! Max 1 Line Cause/Remedy An incompatible AC adapter is connected.
TROUBLESHOOTING Message Block Limit! Max 5 Blocks Length Limit! Insert 0.70" Tape Cassette! Insert 18mm Tape Cassette! Insert 0.47" Tape Cassette! Insert 12mm Tape Cassette! Insert 0.35" Tape Cassette! Insert 9mm Tape Cassette! Insert 0.23" Tape Cassette! Insert 6mm Tape Cassette! Insert 0.13" Tape Cassette! Insert 3.5mm Tape Cassette! Too Much Text For This Layout! Text Too Long! 60 Error Messages Cause/Remedy There are already five blocks of text. Limit the number of blocks to five.
Check # of Digits Entered! Input A,B,C or D At Start&End! Maximum Of 5 Bar Codes Per Label! Text Too High! Select Other Margin! Installed tape is not compatible with this machine! Category Full! Already Exists in Favorites! Favorites Folder Empty! Insert 0.47" or 0.70" tape! Insert 12mm or 18mm tape! System Error XX Cause/Remedy There is not enough internal memory available when you try to save a label file. Delete any unnecessary files to make more memory available for the new label file.
APPENDIX Specifications Main Unit Item Display Character display Screen contrast Printing Print method Print head Print height Print speed Tape cassette No. of lines Margin Memory Memory buffer size File storage Other Features Templates Power Supply Power supply Auto Power-off Size Dimensions Weight Other Operating temperature / humidity Specification 16 characters x 2 guidance and 2 lines text (128 dot x 56 dot) 5 levels (+2, +1, 0, -1, -2) Thermal Transfer 112 dot / 180 dpi 0.62" (15.8 mm) max.
INDEX R AC adapter ....................................... 19 Accented Character List ................... 31 Auto power-off time .......................... 23 Return mark ......................................15 B Battery .............................................. 18 Block Layouts ................................... 43 C Caps mode ....................................... 15 contrast ............................................. 23 cursor keys ....................................... 26 S size .......
Contact Information (For USA Only) Service Center Locations If you need a local service center, please call 1-877-BROTHER (1-877-276-8437) to locate the authorized service center closest to you. Note: Be sure to call the Service Center before your visit. Service centers do not provide operational assistance. See "Operational Assistance".
Printed in China LAC009001