user manual
24
Setting Language and Unit
GETTING STARTED
Back Light
You can change the back light setting either to ON or OFF.
The display is easier to see with the back light ON. The default setting is "ON".
Press the
Menu
key to display the Setup menu, select "Backlight" using the or
key, and then press the
OK
or
Enter
key.
Select "ON" or "OFF" using the or key.
Press the
OK
or
Enter
key.
Language
Press the
Menu
key to display the Setup menu, select "Language" using the or
key, and then press the
OK
or
Enter
key.
Select a language for menu commands and messages shown on the LCD display by
using the or key.
The language can be selected from "Čeština", "Dansk", "Deutsch", "English",
"Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",
"Português", "Português(Brasil)", "Română", "Slovenski", "Slovenský", "Suomi",
"Svenska" or "Türkçe".
Press the
OK
or
Enter
key.
Unit
Press the
Menu
key to display the Setup menu, select "Unit" using the or key,
and then press the
OK
or
Enter
key.
Select a unit for dimensions shown on the LCD display by using the or key.
Either "inch" or "mm" can be selected.
Press the
OK
or
Enter
key.
1
2
3
• Power can be saved when the back light is turned off.
• The back light is turned off automatically if there is no operation for more than 10 seconds. It can be turned back
on by pressing any key. The back light turns off when printing.
Setting Language and Unit
1
2
3
Press the
Escape
key to return to the previous step.
1
2
3
The default setting is "inch".
Press the
Escape
key to return to the previous step.