Quick Setup Guide

ManualsBrandsBrother ManualsPrinterPS-9000

Setting Up P-touch Print Server PS-9000

1 Introduction

● This Setup Guide describes the procedure

for setting up PS-9000. For details on the

setup procedure, refer to the manual

provided on the enclosed CD-ROM. (In

order to view the manual, Adobe

Acrobat

Reader

or Adobe

Reader

is required.)

● The procedure for creating a P-touch

network port (Brother PS-9000 Port) is

described in this Setup Guide.

2 Procedure for setting up

PS-9000

For the initial installation (for

the administrator computer)

For setup onto the second or more

computer (for client computers)

3 Checking the package contents

and preparing equipment

● Check that the following accessories are

included.

1 PS-9000 unit

2 AC adapter and AC cable

3 CD-ROM (containing the manual and

tools for setting up this unit)

4 Setup Guide (this manual)

* For details on the QL-1050N accessories,

refer to the QL-1050N Quick Start Guide.

● Prepare the following.

1 USB cable

* Connects this unit to the

P-touch

2 Network cable

* Connects this unit to the

network

3 Ethernet HUB

* Required for a network

environment

4 Installing the P-touch

printer driver

QL-500/QL-550/QL-650TD

QL-1050/QL-1050N

PT-9500PC

PT-9200DX

From the dialog box that appears when the

CD-ROM included with PS-9000 (this unit) is

inserted into the drive, click [P-touch Driver], and

then install the network driver for your P-touch.

US English

Install the P-touch

printer driver.

Connect the

P-touch and

PS-9000.

Set up the

PS-9000 and install

the printing

software.

Set up the print

port.

Install the P-touch

printer driver.

Install the printing

software.

Set up the print port.

Note

● Install the printer driver according to

the instructions that appear on the

screen.

PS9000_setup.book Page 1 Thursday, August 17, 2006 12:56 PM

Summary of content (4 pages)

PAGE 1
PS9000_setup.book Page 1 Thursday, August 17, 2006 12:56 PM US English Setting Up P-touch Print Server PS-9000 1 Introduction ● This Setup Guide describes the procedure for setting up PS-9000. For details on the setup procedure, refer to the manual provided on the enclosed CD-ROM. (In order to view the manual, Adobe® Acrobat® Reader® or Adobe® Reader® is required.) ● The procedure for creating a P-touch network port (Brother PS-9000 Port) is described in this Setup Guide.
PAGE 2
PS9000_setup.book Page 2 Thursday, August 17, 2006 12:56 PM 5 Connecting PS-9000 Use the network cable to connect 1 PS-9000 to the Ethernet hub. ● The USB cable has two different types of connectors. Be sure to insert the correct type of connector into the correct port. US English Connect the AC adapter to PS-9000, and 2 then plug the power cable of the P-touch and PS-9000 into the electrical outlet. Note ■ USB Cable Connectors Use the USB cable to connect PS-9000 to 3 the P-touch.
PAGE 3
PS9000_setup.book Page 3 Thursday, August 17, 2006 12:56 PM Read the Software License Agreement, 3 and then click [Yes] if you agree. • If “Obtain an IP address automatically” is selected →In an environment with a DHCP/ BOOTP server, the IP address of PS-9000 is automatically assigned. Select “Installs this unit and the utility.”, 4 and then click [Next]. The selected configuration is displayed 7 for you to check it. If the configuration is correct, click [Execute] to apply it.
PAGE 4
PS9000_setup.book Page 4 Thursday, August 17, 2006 12:56 PM • If you change the name, make sure that the group name you specify is not used already. Type in the printer port name, and then d click [Next]. Select if you want to set up the printer • When you assign the printer port name, make sure that the port name you specify is not used already (e.g., LPT1:). The setup configuration is displayed. Select “Yes”, and then click [Next]. e Click [Finish].