Quick Setup Guide

4
US English
• If you change the name, make sure that
the group name you specify is not used
already.
0
Select if you want to set up the printer
port.
Select “Yes”, and then click [Next].
a
Select the P-touch to be set up, and then
click [Next].
b
Click [Next].
c
Select PS-9000, which is to be set up,
and then click [Next].
• If the product to be set up is not
displayed in the list, click [Search].
d
Type in the printer port name, and then
click [Next].
• When you assign the printer port name,
make sure that the port name you
specify is not used already (e.g., LPT1:).
e
The setup configuration is displayed.
Click [Finish].
f
The setup is completed when the dialog
box shown below appears. Click
[Finish].
7 Contact information
Operational Assistance
For technical and operational assistance
you may call Brother Customer Service at:
Voice 1-877-4-PTouch,
or Fax [phone]
PS9000_setup.book Page 4 Thursday, August 17, 2006 12:56 PM