2400/2410 USER’S GUIDE • Read this User’s Guide before you start using your P-touch. • Keep this User’s Guide in a handy place for future reference.
INTRODUCTION Thank you for purchasing the P-touch 2400/2410! Your new P-touch will allow you to create labels and stamps for any need. Its versatility enables you to design custom labels by choosing from a variety of frame designs and from many characters sizes and styles. In addition, the five tape widths (1/4” (6 mm), 3/8” (9 mm), 1/2” (12 mm), 3/4” (18 mm), and 1” (24 mm)) and variety of tape colors allow you to print personalized labels, useful for color-coded filing.
CONTENTS Getting Started GENERAL DESCRIPTION .................................................................................... 2 GENERAL PRECAUTIONS................................................................................... 4 BATTERIES .......................................................................................................... 5 OPTIONAL AC ADAPTOR .................................................................................. 6 CONNECTING THE P-TOUCH TO A COMPUTER ..............
AUTO FORMAT FUNCTION ............................................................................ 66 STAMP FUNCTION .......................................................................................... 76 LOCAL FORMAT FUNCTION ........................................................................... 79 FONT FUNCTION ............................................................................................ 80 SIZE & WIDTH FUNCTIONS ....................................................................
Getting Started 1
GENERAL DESCRIPTION TOP VIEW Tape compartment cover AC adaptor connector Keyboard Interface connector LCD display BOTTOM VIEW Tape exit slot Battery compartment cover 2
KEYBOARD & LCD DISPLAY Power key Length Undl/Frm A.Format Width Mirror On Off Print Memory Font Size ! 1 ¡ Width Style # 3 $ 4 @ 2 Tab Length Tab Q Symbol W Accent A Alt A.Cut Shift Z % 5 Tape Align E R Store Frame ¢ 6 Length T Recall & 7 A.Format Y M.
GENERAL PRECAUTIONS • Use only Brother TZ tapes with this machine. Do not use tapes that do not have the mark. • Do not pull on the tape being fed from the P-touch. This may damage the tape cassette. • Do not use the machine in dusty places, and keep it out of both direct sunlight and rain. • Do not expose the machine to high temperatures or high humidity. Never leave it on the dashboard or in the back of your car. • Do not leave any rubber or vinyl on the machine for an extended period of time.
BATTERIES This lightweight and portable machine can be used anywhere by installing eight (8) AA alkaline batteries. When you change the batteries, always replace all eight at the same time. To change the batteries: 1 2 3 4 Remove the battery compartment cover on the back of the machine. If batteries are already installed, remove them. Insert eight new AA alkaline batteries, making sure that they face the correct direction. Attach the battery compartment cover.
OPTIONAL AC ADAPTOR The AC adaptor (model AD-60) allows you to use this machine wherever there is an electrical outlet. To connect the optional AC adaptor: Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right side of the machine. 2 Insert the plug on the adaptor into the nearest standard electrical outlet. ☞ Remove the batteries and disconnect the AC adaptor if you do not intend to use this machine for an extended period of time.
CONNECTING THE P-TOUCH TO A COMPUTER This machine is equipped with an interface connector, allowing you to print labels and stamps that you have created with the P-touch Editor software installed on your IBM PC-compatible computer or Macintosh. To connect the P-touch to the computer: Turn off both the P-touch and the computer. Insert the small plug on the interface cable into the interface connector on the right side of the P-touch. ☞ Only use the interface cable designed exclusively for this machine.
INSTALLING P-TOUCH EDITOR Installing the P-touch Editor software and printer driver add even more illustration and layout features to the label-making possibilities available with your PT-2400/2410. To install P-touch Editor and the printer driver on an IBM PC-compatible computer: Check that your system configuration meets the following requirements. Computer: IBM PC or compatible Operating system: Microsoft Windows® 95, 98 or NT 4.
7 In the User Information dialog box, type your name and company’s name in the appropriate boxes to personalize your copy of P-touch Editor, and then click the Next button. In the Registration Confirmation dialog box, click the Yes button to register the entered information. 9 In the Setup Type dialog box, click Typical to install all of the basic options, Compact to install only the minimum options necessary, or Custom to select the options to be installed.
A B C In the dialog box that has appeared, click the Yes button. In the Driver Setup dialog box that has appeared, select Install, and then click the Next button. For Windows® 95/98: Skip to step D. For Windows® NT 4.0: Click the Next button. ☞ If the Next button cannot be clicked, no PTCOM port is installed. In this case, click the Add button. In the Port Name dialog box, select the port where the PT-2400/2410 is connected, and then click the OK button.
E In the Driver Setup dialog box that has appeared, click the Next button to confirm the installation information and start installing the printer driver. F In the Driver Setup dialog box that has appeared, click the Next button to start up the Change Baud Rate Wizard. G In the Change Baud Rate Wizard dialog box that has appeared, select the serial port where the PT-2400/2410 is connected, and then click the Next button.
I If the settings are correct, click the Next button to enter the settings. To change the settings, click the Back button. J In the Change Baud Rate Wizard dialog box that has appeared, click the Finish button. K In the Driver Setup dialog box that has appeared, click the Finish button to finish setting up the printer driver. L In the Setup Complete dialog box that has appeared, click Yes, I want to restart my computer now., and then click the Finish button.
2 3 4 5 Printer (serial) port: 8-pin connector jack CD-ROM drive Connect the PT-2400/2410 to the computer’s printer port and turn on both the PT2400/2410 and the computer. Insert the P-touch Editor CD-ROM into the computer’s CD-ROM drive and double-click the CD-ROM icon. ☞ The installers for the P-touch Editor program and the User’s Guide can also be copied from the CD-ROM onto floppy disks. Refer to the Readme file for more details.
To select the PT-2400/2410 as the printer on the Mac: 1 Pull down the Apple menu and select Chooser to display the Chooser window. 2 Click the PT-2400/2410 icon in the list on the left. 3 Click the icon for the printer port in the list on the right. 4 Close the Chooser window to confirm your settings.
STARTING UP P-TOUCH EDITOR The P-touch Editor application makes it easy for anyone to design and print labels for almost any need imaginable. To start up P-touch Editor on an IBM PC-compatible computer: By clicking the P-touch Editor icon: • Double-click the P-touch Editor 3 icon in the P-touch Editor 3 group window. With the Start button: 1 Click the Start button in the taskbar to display the Start menu. 2 Select Programs. 3 Select P-touch Editor 3. 4 Click P-touch Editor 3.
To start up P-touch Editor on a Macintosh computer: • Double-click the P-touch Editor Ver3.0 icon in the “P-touch Editor Ver3.0” folder installed on the computer. After P-touch Editor is started, the following window is displayed.
DESIGNING AN AUTO FORMAT LAYOUT In addition to allowing you to draw pictures and arrange text using any of the available fonts, sizes, and styles, P-touch Editor comes with a variety of pre-formatted templates, which make creating label layouts quick and easy. Now let’s see how simple it is to create a label layout with the Auto Format command. To design a layout on an IBM PC-compatible computer: 1 2 On the File menu, click the Auto Format command.
9 Click the Next button. 0 In the Auto Format Wizard (4/4) dialog box, click the desired options. A Click the Finish button. A new layout document containing the pre-formatted text appears in the layout area. To design a layout on a Macintosh computer: On the File menu, click Auto Format command to display the Auto Format dialog box. 2 In the Category box, click the desired category. For this example, let’s select shop. 3 In the Template box, click the desired template. Let’s select the one named shop3.
Repeat steps 5 and 6 to make the desired changes to all of the text. Let’s finish editing the text by changing the original price to “$415.” and the sale price to “$215.” 8 Click the Close button. The new text appears in the layout area.
IMPORTING A GRAPHICS FILE With the P-touch Editor application, you can also import image files in a variety of formats (.bmp, .dib, .jpg, .gif, .tif, .ico, and .wmf on the PC or PICT, JPEG, TIFF and BMP on the Mac) into your layout. To import a graphics file: 1 With a layout document displayed, select the Image command in the Insert menu (in the PC software) or in the Object menu (in the Mac software). A dialog box that allows you to select the image file appears.
READING THE USER’S GUIDE The P-touch Editor User’s Guide can be read either by inserting the CD-ROM into the drive each time you wish to refer to it or by installing it onto your hard disk so that it is quickly available at any time. Since the User’s Guide is an HTML document, a browser is needed to read it. The installer for the Internet Explorer 4.01 browser is also available on the CD-ROM.
To read the P-touch Editor User’s Guide on a Macintosh computer: 1 2 22 If the User’s Guide was not installed onto the computer’s hard disk, insert the P-touch Editor CD-ROM into the CD-ROM drive. Double-click Main.htm in the User’s Guide folder of the CD-ROM’s P-touch folder (if the User’s Guide is not installed on the hard disk), or of the installed P-touch Editor Ver3.0 folder (if the User’s Guide is installed on the hard disk).
TAPE CASSETTE A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are available for this machine in a wide variety of colors and sizes, it is possible to make distinctive color-coded and stylized labels. In addition, this machine has been designed to allow you to change the tape cassettes quickly and easily. To change the tape cassette: 1 2 3 4 5 Lift open the tape compartment cover. The installed cassette is also released.
ATTACHING LABELS LAMINATED TAPE The enclosed stick enables you to easily remove the backing from labels printed on laminated tapes. 1 Hold the tape in your left hand, with the printed surface facing up, and hold the stick in your right hand. 2 Pass the tape halfway through the long narrow hole in the stick. 3 Turn the stick three-quarters of a turn towards you and pull the stick away from you as shown below. 4 Peel off the label backing.
PRINT HEAD & ROLLERS Occasionally, specks of dust or dirt become attached to the machine’s print head and rollers. This is particularly likely when you are using the unit outdoors or in a very dusty environment. If a section of the print head is covered with dust, a blank horizontal streak may appear through the label text. Therefore, as with a tape recorder, the machine’s head may need to be cleaned from time to time. To clean the print head and rollers: Turn off the machine.
26
Learning the Ropes 27
DOOR LABEL EXAMPLE After you have inserted the batteries and the enclosed tape cassette as explained in the Getting Started chapter, let’s practice using some of the basic functions of your P-touch. We must first begin by turning on the power to the machine. To turn on the machine: 1 Press On Off in the top right-hand corner of the keyboard. Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: _ Width The underline in the LCD display is called the “cursor”.
ENTERING THE TEXT Since all of the text will be in capital letters, we will use the Caps mode, which allows us to Caps type capital letters continuously without holding down Shift . To enter Caps mode: Caps 2 Hold down and press Code Shift once. The Caps indicator on the left side of the display lights up. Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: _ Width Then, let’s type in the text in the same way that you would type on a typewriter or a computer keyboard.
To add a space: 4 Press Feed&Cut Space . Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: M E E T I N G _ Width Type the second word, “ROOM”, to finish the text. To type in “ROOM”: Align 5 Press R Repeat once, O ó twice, then M ñ once. ☞ Since the text is longer than the LCD display, “ME” moves off the display to the left. Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: E T I N G R O O M _ Width Now that we are finished entering capital letters, we can exit Caps mode.
PRINTING THE TEXT Several format settings are available, however, in this example we will use the default settings pre-programmed into the machine and print out our label, which is then automatically cut off after printing is finished. To print the door label: Mirror 7 Press Print once. The message “WORKING” appears just before printing, and then “COPIES 1/ 1” is displayed while the label is being printed. ☞ If the A.Cut function is set to ON, the label is automatically cut off after it is printed.
ADDRESS LABEL EXAMPLE While making the multi-line address label in this example, we will learn how to create more decorative labels using the various format settings. ☞ Five-line labels, such as this address label, can only be printed on either 3/4” (18-mm)or 1” (24-mm)-wide tape. Before entering the new text, we must first erase the text shown in the display from the previous time that the machine was used.
ENTERING THE TEXT Let’s begin by typing in the first row of text, the name “Bill Reynolds”. To type in “Bill Reynolds”: Caps 3 Hold down Shift and press Shift once, Barcode Caps then release B . Press I í Alt once, then Caps L twice. ú 4 Press Length Undl/Frm A.Format OK TO 1: B i l l _ Width Feed&Cut Space . Alt Caps Length Undl/Frm A.Format OK TO 1: B i l l _ Width 5 Type in “Reynolds”. ☞ Again, the text is longer than the LCD display. So “Bil” moves off the display to the left.
Now, we can enter the company name, address, and telephone number: ABC Transport; 29 South Main St.; Los Angeles, CA 88888; 012-345-6789. To type in the company name, address, and telephone number: 7 Type “ABC Transport”, and then press New Block . Alt Caps 2: A B C 3: _ Length Undl/Frm A.Format Transpo Width 8 Type “29 South Main St.”, and then press New Block . Alt Caps 3: 2 9 4: _ South Length Undl/Frm A.Format Ma Width 9 Type “Los Angeles, CA 88888”, and then New Block press .
FORMATTING THE TEXT Now the text is entered as we wish. If it were printed, the standard default settings would be used. The text would be aligned on the left side with 1” (25 mm) margins and would not be framed or underlined. In addition, the characters would be auto-sized (AUTO) and printed using the HELSINKI font and NORMAL style settings. For more details concerning format settings, please see pages 82 through 96.
To select the NONE tape margin setting: Tape E While holding down once, and keep Code Code , press E held down to dis- play the current tape margin setting. Alt Caps Length Undl/Frm A.Format FEED FULL Width F While still holding down , con- Code Tape tinue pressing E until NONE is dis- played, and then release Code . Alt Caps Length Undl/Frm A.Format FEED NONE Width Different format settings can be chosen either before or after the text is entered.
New Block I Press to begin printing. The message “WORKING” appears just before printing, and then the number of each copy being printed is displayed. Alt Length Undl/Frm A.Format WORKING Caps Alt Caps Width Alt Caps Width Length Undl/Frm A.Format COPIES 2/ 3 Width Length Undl/Frm A.Format COPIES 1/ 3 Alt Caps Length Undl/Frm A.Format COPIES 3/ 3 Width ☞ If the A.Cut function is set to ON, each label is automatically cut off after it is printed.
STORAGE SHELF LABEL EXAMPLE In this final example, we will practice using the New block function and the Local format function as well as more specialized features such as the Barcode and Numbering functions. The following labels, which could be used to describe objects stored on a shelf, contain multiple blocks and mixed formatting. ☞ The labels in this example were made using 3/4” (18-mm)-wide tape.
ENTERING THE TEXT Now, we can begin entering the text for our storage shelf label. To input the shelf number (the first block of text): 3 Type in “B1”. Length Undl/Frm A.Format Alt Caps 1: B 1 _ Width Each time the number of lines in a section of the text changes, a new block of text must be created. Therefore, the text for our label must be entered in three separate blocks. Since we will now change from a one-line to a three-line block, we will use the New block function instead of a normal return.
6 Type “29 South Main St.”, then press New Block . Alt Caps 2: 2 9 3: _ South Length Undl/Frm A.Format Ma Width 7 Type “Los Angeles, CA 88888”, hold New Block down Code and press once. Alt Caps 3: L o s 1: _ Length Undl/Frm A.Format Angeles Width Now, we must enter the third block of the text: the barcode. Although there are many barcode types available, let’s use CODE 39, which can use an unrestricted number of digits.
If we wished to use a different type or change any of the default barcode settings, we could press Home , and then use the cursor keys to change the parameter settings. However, since we will use the default settings for this example, we can immediately input our barcode data. To enter the barcode data: 9 Type in “12345”. Alt Caps Length Undl/Frm A.Format CODE 39 12345 Width New Block 0 Press . Alt Caps 3: L o s 1: _ Length Undl/Frm A.
To select the SOLID style setting for the first block: Local B Hold down Code and press once. S Alt Caps BLOCK 1: B 1 Length Undl/Frm A.Format FORMAT Width Style C Hold down Code and press once. $ 4 Alt Caps Length Undl/Frm A.Format STYLE NORMAL Width D Keep Code held down and continue Style pressing $ 4 until SOLID is displayed, Length Undl/Frm A.Format Alt and then release Code .
F Press until “1” is flashing. Alt Caps SET 1: B 1 START Length Undl/Frm A.Format PT Width New Block G Press . Alt Caps SET 1: B 1 END Length Undl/Frm A.Format PT Width H Since we only want “1” in the numbering New Block field, press again. Alt # Caps Length Undl/Frm A.Format INCREASES 1 Width Size I Press @ 2 once. ☞ The number can be entered either by typing it in using the number keys or by selecting it using Home and . End Alt Caps # Length Undl/Frm A.
New Block J Press to begin printing the labels. ☞ If the A.Cut function is set to ON, each label is automatically cut off after it is printed. Alt Length Undl/Frm A.Format WORKING Caps Alt Length Undl/Frm A.Format COPIES 1/ 2 Width Width Caps Alt Caps Length Undl/Frm A.Format COPIES 2/ 2 Width With these examples, we have covered many of the basic features of your P-touch so that you can begin creating your own customized labels.
For Your Information 45
POWER KEY The power key ( On Off ) is located in the top right-hand corner of the keyboard. If batteries have been installed or the machine has been plugged in using the optional AC adaptor, the previous session’s information is displayed when the machine is turned on. This feature allows you to stop work on a label, turn off the machine, and return to it later without having to reenter the text. The machine will automatically turn off if no key is pressed within 5 minutes.
CURSOR KEYS The machine’s LCD display shows two rows of 11 characters; however, the text that you enter can be up to 255 characters long. You can review and edit your text by using the cursor keys to move the cursor so that different parts are shown in the display. LEFT CURSOR KEY To move the cursor one character to the left: ● Press once. ☞ If the cursor is at the beginning of a line when this key is pressed, the cursor moves to the end of the previous line.
UP CURSOR KEY To move the cursor up to the previous line: ● Press Home once. ☞ If the cursor is in the first line of text, it will move to the beginning of the line. To move the cursor up several lines: ● Hold down Home until the cursor moves to the desired position. To move the cursor to the beginning of the entire text: ● Hold down Code and press Home . DOWN CURSOR KEY To move the cursor down to the following line: ● Press End once.
CODE, ALT & SHIFT KEYS Most characters can be entered simply by pressing their keys. However, to use special functions or to enter capital letters, accented characters and some symbols, the following special keys are necessary. CODE KEY To use a function printed above a key: ● Hold down Code and press the key immediately below the desired function. EXAMPLE To start the Symbol function: Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: A B C _ Width Symbol ● Hold down Code and press Alt once.
ALT KEY To type in characters printed in color on the right-hand side of the keys: Symbol ● Hold down Alt and press the key of the desired character. The Alt indicator on the left Symbol side of the display lights up while ☞ Alt is held down. Caps To type in the capital letter of a character written in color, hold down Shift (or hold Caps down and press Code Shift once to enter Caps mode) before pressing the key of the desired character. EXAMPLE To type in “–”: Symbol 1 Hold down Alt .
SHIFT KEY To type in a capital letter or a symbol printed in the upper-left corner of a key: Caps ● Hold down Shift and press the key of the desired letter or symbol. EXAMPLE To type in “%”: Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: 5 _ Width Caps ● Hold down Shift Underline and press % 5 . Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: 5 % _ Width CAPS MODE Caps The Caps mode allows you to type capital letters continuously without holding down Shift .
SPACE KEY Feed&Cut The Space key ( Space ) lets you add blank spaces between characters in your text. It is differ- ent from the right cursor key ( spaces. To add a space: ), which just moves the cursor without adding blank Feed&Cut ● Press Space . EXAMPLE To add a space: Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: J . _ Width Feed&Cut ● Press Space . Alt Caps Length Undl/Frm A.Format ABCDEFGHIJKL 1: J .
RETURN KEY New Block Like on a typewriter or word processor, this machine’s return key ( ) is used to end a line of text and start another one. When you have finished entering one line, press the return key to make a new line and move the cursor to it. New Block ☞ Each block can only contain a maximum of seven text lines. If you press when the cursor is located in the seventh line, the error message “7 LINE LIMIT!” will appear.
NEW BLOCK FUNCTION Whenever the number of lines in a section of the text changes, a new block must be created. ☞ A single label can only contain a maximum of five blocks. If the cursor is located in the New Block is pressed, the error message “5 fifth block when Code is held down and BLOCK LIMIT!” appears.
TAB FUNCTION This function allows you to separate sections of a line of text by adding tabs. This enables you to create perfectly aligned columns without having to type in several spaces. All tabs have the same length and are measured from either the beginning of the line or the previous tab if there is more than one. The tab length can be set between 0.0 and 11.8 inches (0.0 and 30.0 centimeters). ☞ The text can contain no more than 50 tabs.
the label shown below will be printed. ABC DEF JKLMNOPQRST Margin Tab (2” (5 cm)) GHI U Tab (2” (5 cm)) Margin EXAMPLE To set the tab length: Tab Length 1 Hold down Code and press W once. Alt Caps Length Undl/Frm A.Format TAB LENGTH 2.0inch Width 2 Press End until 1.0inch is displayed. Alt Caps New Block 3 Press Length Undl/Frm A.Format TAB LENGTH 1.0inch Width . To add a tab: Tab ● Hold down Code and press Q once. Alt Caps Length Undl/Frm A.
DELETE KEY Clear The delete key ( Del ) allows you to remove characters to the left of the cursor’s current posi- tion. It differs from the left cursor key ( ), which only moves the cursor without deleting any characters. The delete key can also be used to quit most functions and return to the previous display without changing the text. Some questions asking you to confirm a command may appear on the LCD display, especially Clear when the function that you have chosen will delete or affect files.
LINE OUT FUNCTION With the Line Out function, you can easily remove an entire line of text. To delete a line of text: 1 Press , wish to delete. 2 Hold down , Home or End to position the cursor within the line of text that you Line out ☞ and press Code ) 0 once. Line out Each time ) 0 is pressed while Code is held down, the line of text containing the cursor is deleted. EXAMPLE To delete “012-345-6789”: Alt Caps Length Undl/Frm A.
CLEAR FUNCTION When clearing the display before entering new text, the Clear function can be used to choose whether all of the text is erased and all format functions (Font, Size, Width, Style, Underline, Frame, Tape margin, Alignment, Tab length, Mirror printing, and Length) are returned to their default settings, or whether just the text is erased. To delete all of the text and return all formats to their default settings: Clear 1 Hold down 2 Press ☞ Home Code or and press Del .
New Block 3 Press . Length Undl/Frm A.Format Alt Caps 1: _ Width To delete just the text: Clear 1 Hold down 2 Press ☞ Home Code or End and press Del . until TEXT ONLY is selected (flashing). Clear To return to the text without erasing anything, press Del . New Block 3 Press . EXAMPLE To clear just the text: Alt Caps Length Undl/Frm A.Format 1: s G a r d e n 2: 2 - 3 4 5 - 6 7 8 9 _ Width Clear 1 Hold down Code and press Del . Alt Caps Length Undl/Frm A.
2 Press End until TEXT ONLY is flashing. Alt Caps Length Undl/Frm A.Format TEXT&FORMATS TEXT ONLY Width New Block 3 Press . Length Undl/Frm A.
ACCENT FUNCTION The Accent function can also be used to add accented characters to your text. Many of these Symbol characters can also be found on the keys and typed in using Alt (refer to page 50) or they can be entered using the Symbol function (refer to pages 64 and 65). The accented characters are grouped according to the capital or lowercase letter that they are combined with.
EXAMPLE To add the accented character “É”: Accent 1 Hold down Code and press . A Alt Caps Length Undl/Frm A.Format ACCENT a-y/A-U? Width Tape Caps 2 Hold down Shift and press E . Alt Caps Length Undl/Frm A.Format ÈÉËÊ 1: R E S U M _ Width 3 Press until É flashes. Alt Caps Length Undl/Frm A.Format ÈÉËÊ 1: R E S U M _ Width New Block 4 Press . Length Undl/Frm A.
SYMBOL FUNCTION In addition to the letters, symbols and numerals on the key tops, there are 67 additional marks available with the Symbol function. The following symbols are available: Group Symbol 1 Ü Æ æ Ã 2 + × ÷ = ã Ẽ ẽ § 2 3 ☞ ☞ 3 R Õ õ 2 3 ° 4 [ TM ] C 4 5 ♥ ★ 6 ☞ The use of certain symbols contained within this labelling machine may be governed by local, national or European regulation.
EXAMPLE To add the symbol “ ”: Symbol 1 Hold down Code and press Alt . T M Alt Caps Length Undl/Frm A.Format 1: D A N G E R _ Width 2 Press Home taining “ or or End until the row con- ” appears, and then press until “ ” flashes. Alt Caps R Length Undl/Frm A.Format C 1: D A N G E R _ Width New Block 3 Press . Length Undl/Frm A.
AUTO FORMAT FUNCTION The Auto format function makes creating labels quick and easy. After simply selecting one of the various pre-formatted layouts and typing text into each of its fields, the overall style of the label can easily be changed by selecting one of the seven available style formats, and then the label is ready to be printed. The many layouts available allow you to create labels for a variety of needs—from addressing envelopes to identifying floppy disks or audio and video cassettes.
New Block B Press . The first field for the selected layout appears in the display. C Repeat step 4 until the text is edited as you wish. The SELECT MENU appears again when New Block is pressed after editing the last field in the layout. To finish using the Auto format function: D Press Home or End until the EXIT command is displayed. The message “OK TO EXIT AUTO FORMAT?” appears in the display. E Press . Any text displayed before the Auto format function was used reappears in the display.
To change the character style of the label: 5 Press Home or End STYLE is displayed. until CHANGE Alt Caps SELECT CHNAGE Length Undl/Frm A.Format MENU STYLE Width New Block 6 Press . Alt Caps Length Undl/Frm A.Format CHAR. STYLE ORIGINAL Width 7 Press Home or End until ELEGANT is displayed. Alt Caps Length Undl/Frm A.Format CHAR. STYLE ELEGANT Width New Block 8 Press . Alt Caps Length Undl/Frm A.Format MENU PRINT Width To print the label: New Block 9 Press Alt .
REFERENCE No. Layout name 1 VCR VHS-1 2 VCR VHS-2 3 VCR 8mm-1 4 VCR 8mm-2 5 VCR VHSC-1 6 VCR VHSC-2 7 AUDIO-1 8 AUDIO-2 9 10 AUDIO-3 11 12 DAT-1 13 DAT-2 14 MINI DISK-1 15 MINI DISK-2 16 NAME PLATE 17 Tape width × label length Layout fields 11 SYMBOL? 3/4” × 5.5” 22 TITLE? (18 mm × 140 mm) 33 SUBTITLE? 1” × 3.0” 11 TITLE? (24 mm × 77 mm) 22 SUBTITLE? 11 SYMBOL? 3/8” × 2.9” 22 TITLE? (9 mm × 73 mm) 33 SUBTITLE? 11 SYMBOL? 1/2” × 3.6” 22 TITLE? (12 mm × 92 mm) 33 SUBTITLE? 1/2” × 1.
No. Layout name 18 ADDRESS 19 20 EQUIPMENT 21 22 SLIDE 23 PRICE 24 25 SALE PRICE 26 27 ORGANIZER L 28 ORGANIZER S 29 FILE LONG 30 31 FILE LONGV 32 33 34 FILE SHORT 35 36 70 Tape width × label length 1” × 3.1” (24 mm × 80 mm) 3/4” × 3.1” (18 mm × 80 mm) 1” × 3.1” (24 mm × 79 mm) 3/4” × 3.1” (18 mm × 79 mm) 1/2” × 1.7” (12 mm × 42 mm) 1” × 2.2” (24 mm × 57 mm) 3/4” × 2.2” (18 mm × 57 mm) 1” × 3.6” (24 mm × 92 mm) 3/4” × 3.6” (18 mm × 92 mm) Layout fields 11 NAME? 33 ADDRESS2? 22 ADDRESS1? 44 ADD.
No. Layout name 37 3.5” FLOPPY 38 39 5” FLO PPY 40 Tape width × label length 1” × 2.7” (24 mm × 69 mm) 3/4” × 2.7” (18 mm × 69 mm) 1” × 3.1” (24 mm × 79 mm) 3/4” × 3.
9 AUDIO-2 10 AUDIO-3 11 AUDIO-3 12 DAT-1 13 DAT-2 14 MINI DISK-1 15 MINI DISK-2 16 NAME PLATE 17 NAME PLATE 18 ADDRESS 19 ADDRESS 20 EQUIPMENT 72
21 EQUIPMENT 22 SLIDE 23 PRICE 24 PRICE 25 SALE PRICE 26 SALE PRICE 27 ORGANIZER L 28 ORGANIZER S 29 FILE LONG 30 FILE LONG 73
31 FILE LONGV 32 FILE LONGV 33 FILE SHORT 34 FILE SHORT 35 FILE SHORT 36 FILE SHORT 37 3.5” FLOPPY 38 3.
REFERENCE CHAR.
STAMP FUNCTION The Stamp function allows you to quickly and easily create your own stamp stencil films for customized stamps. Select this function to automatically center the text and adjust the tape length and margins to a perfect format for the pre-inked stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and replace the one in the holder. To make a stamp: 1 Type in the text, and then insert a medium (3/4” (18-mm)-wide) or large (1” (24-mm)wide) stamp film cassette.
Mirror 4 Press Alt Print to engrave the stamp stencil film, and then automatically cut off. Length Undl/Frm A.Format WORKING Caps Length Undl/Frm A.Format COPIES 1/ 1 Alt Caps Width Width To affix a stamp: 5 Remove the stamp frame from around the stamp film holder ink pad, one side at a time, then remove the protective seal covering the ink pad and the backing paper from the stamp stencil film.
8 Fold the other end of the stamp stencil film over the other side of the stamp film holder and hold it in place with your finger. Fold over 9 Fit the stamp frame over the stamp stencil film and push it into place. 0 Insert the stamp film holder straight into its cap. ☞ 78 Be sure that the stamp is correctly covered in order to prevent ink spills.
LOCAL FORMAT FUNCTION The Local format function allows you to emphasize a block of the text by printing it with a font, size, width, style, underline or frame setting that is different from the rest of the text. To use the Local format function: 1 Press , , Home or to position the cursor in the block that will be given a End different format. Local 2 Hold down Code and press S once. “BLOCK FORMAT” appears in the top row of the display to indicate that the current text block will have the local format.
FONT FUNCTION With the Font function, you can choose one of eight fonts for your text. The following font settings are available: HELSINKI, BRUSSELS, BELGIUM, US, SAN DIEGO, FLORIDA, LOS ANGELES, and ISTANBUL The default font setting is HELSINKI. Refer to Reference at the end of this section for samples of the available settings. To change the font setting: Font 1 While holding down , press Code ! 1 ¡ once, and keep Code held down to display the current font setting.
REFERENCE Font setting Font sample HELSINKI BRUSSELS BELGIUM US SAN DIEGO FLORIDA LOS ANGELES ISTANBUL 81
SIZE & WIDTH FUNCTIONS The character size can be adjusted using both the Size and Width functions. Since the character size that can be used depends on the width of the tape, the following table shows the character sizes that can be used with each tape width.
To change the size setting: Size 1 While holding down , press Code @ 2 once, and keep Code held down to display the current size setting. Size 2 While still holding down 3 displayed and is shown by the size indicator. ☞ The current character size setting is also shown by the size indicators above the display. Release Code to apply the selected size setting to the text.
To change the width setting: Width 1 While holding down , press Code # 3 once, and keep Code held down to display the current width setting. Width 2 While still holding down 3 displayed. ☞ The Width indicator lights up when either the NARROW or WIDE setting is selected. Release Code to apply the selected width setting to the text.
REFERENCE Size setting (in pts) Width function NARROW Width function MEDIUM Width function WIDE 6 9 12 18 24 36 48 85
STYLE FUNCTION You can choose from eleven different character styles to apply to your text. ☞ Characters printed using the smaller sizes may be difficult to read if certain style settings (e.g., I+SHADOW) are selected. The following style settings are available: NORMAL I+BOLD (italic & bold) BOLD I+OUTLINE (italic & outline) OUTLINE I+SOLID (italic & solid) SOLID I+SHADOW (italic & shadow) SHADOW VERTICAL ITALIC The default style setting is NORMAL.
2 While still holding down Code , con- Style tinue pressing $ 4 until I+SHADOW is Alt displayed. Caps Length Undl/Frm A.Format STYLE I+SHADOW Width 3 Release Code .
Font setting HELSINKI BRUSSELS BELGIUM US SAN DIEGO FLORIDA LOS ANGELES ISTANBUL 88 Style setting I+BOLD I+OUTLINE I+SOLID I+SHADOW VERTICAL
UNDERLINE FUNCTION You can add emphasis to your text by underlining it or striking it out. The default underline setting is OFF. When the Underline function is set to ON or STRIKEOUT, the Undl/Frm indicator on the right side of the display lights up. ON STRIKEOUT To change the underline setting: Underline 1 While holding down , press Code % 5 once, and keep Code held down to display the current underline setting.
FRAME FUNCTION With the Frame function, you can choose from various frames and highlights to make more decorative or emphasized text. The following frame settings are available: OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE, DOG, MOVIE FILM, DINOSAUR, TELEPHONE, HANDS, WINDOW, BANNER, DOT, DIAMOND, and SLANT The default frame setting is OFF; however, 15 other settings are also available. When any setting other than OFF is selected, the Undl/Frm indicator on the right side of the display lights up.
REFERENCE Frame setting Frame sample Frame setting OFF DINOSAUR SQUARE TELEPHONE ROUND HANDS CANDY WINDOW POINTING BANNER NAMEPLATE DOT DOG DIAMOND MOVIE FILM SLANT Frame sample 91
TAPE MARGIN FUNCTION The Tape margin function allows you to adjust the size of the margins on the left and right sides of your text. The default tape margin setting is FULL; however, three other settings are also available. FULL (1” (25 mm) margins) NONE (1/6” (4 mm) margins) NARROW (1/3” (8 mm) margins) MEDIUM (1/2” (12 mm) margins) ☞ When a setting other than FULL is selected, extra tape is fed out before printing starts.
HORIZONTAL ALIGNMENT FUNCTION You can choose to align lines of text in one of three ways. In addition, if the Length function was used to set the length of the label, the text will align within the label according to the selected horizontal alignment setting. The default horizontal alignment setting is LEFT; however, two other settings are also available.
MIRROR PRINTING FUNCTION With this function, you can print your text so that the characters can be read from the adhesive side of the tape. If mirror-printed labels are attached to glass or some other clear material, they can be read correctly from the opposite side. ☞ When using the Mirror printing function, the text should be printed on clear tape. The default mirror printing setting is OFF.
LENGTH FUNCTION Although the length of the printed label automatically adjusts to fit the length of the entered text, there may be times when you will want to make a label with a specific length. The Length function allows you to set the label length between 1.6 and 11.8 inches (4.0 and 30.0 centimeters). The default length setting is OFF. When the Length function is set to ON, the Length indicator on the right side of the display lights up.
EXAMPLE To select a label length of 6.0 inches: Length 1 While holding down Alt Caps Code , press T Length Undl/Frm A.Format LENGTH 3.1inch once, and keep Alt Caps Code Code Length Undl/Frm A.Format LENGTH OFF Width Width 2 While still holding down held down. , con- Length tinue pressing T until ON is disAlt played. Caps Length Undl/Frm A.Format LENGTH ON Width 3 Release Code . Alt Caps Length Undl/Frm A.Format LENGTH 4.0inch Width 4 Press Home until 6.0 is displayed.
BARCODE FUNCTION The Barcode function, which enables barcodes to be printed as part of labels, is one of this machine’s most advanced features. ☞ This section will explain how to enter a barcode into your text. It is not intended as a comprehensive introduction to the concept of barcoding. For more detailed information, please consult one of the many reference books available.
To change the barcode parameter settings: 3 Press ☞ Home . Clear To return to the barcode data without changing any parameter settings, press 4 Press or 5 Press 6 Repeat steps 4 and 5 until all parameters are set as you wish. 7 Press or Home Del . until the parameter that you wish to change appears. until the desired setting is displayed. End New Block .
VALUE SPECIAL CHARACTER VALUE SPECIAL CHARACTER VALUE SPECIAL CHARACTER 59 [ 76 FF 92 | 60 \ 77 CR 93 GS 61 ] 78 SO 93 } 62 ^ 79 SI 94 RS 63 _ 80 DLE 94 ~ 64 NUL 81 DC1 95 US 64 ` 82 DC2 95 DEL 65 SOH 83 DC3 96 FNC 3 66 STX 84 DC4 97 FNC 2 67 ETX 85 NAK 100 FNC 4 68 EOT 86 SYN 102 FNC1 New Block A Press to add the selected special character to the barcode data. To add the barcode to your text: New Block B Press .
2 Press Home . Alt Caps Length Undl/Frm A.Format PROTOCOL CODE 39 Width 3 Press or until the CHECK DIG. parameter is displayed. Alt Caps CHECK OFF Length Undl/Frm A.Format DIG. Width 4 Press Home or End until ON is dis- played. Alt Caps CHECK ON Length Undl/Frm A.Format DIG. Width New Block 5 Press . Alt CODE Length Undl/Frm A.Format 39 Caps Width Font 6 Press ! 1 ¡ Size , @ 2 Width , # 3 Style then $ 4 .
AUTO CUT FUNCTION The Auto cut function allows you to set whether or not the machine will automatically cut off each label after it is printed. Turn on the Auto cut function before starting to print in order to cut off the labels automatically after printing them. ☞ After printing a label with the Auto cut function set to OFF, hold down Code and press Feed&Cut Space once to feed the tape and cut it. When a tape margin setting other than FULL is selected, extra tape is fed out before printing starts.
PRINT KEY AND FEED & CUT FUNCTION After you have entered your text and chosen the desired format settings, you are ready to print the label. The Feed & Cut function is used to feed out 1” (25 mm) of tape and automatically cut it off, for example after printing with the Auto cut function set to OFF or when printing has been interrupted. To print a label: Mirror ● Press Print once. The message “WORKING” appears just before printing, and then “COPIES 1/ 1” is displayed while the label is being printed.
NUMBERING FUNCTION This function can be used to print many copies of the same text while increasing certain characters (letters, numbers or barcode data) after each label is printed. This type of automatic incrementation is very useful when printing serial number labels, production control labels or other labels requiring ascending codes. Letters and numbers increase as shown below: 0 ➔ 1 ➔ ...9 ➔ 0 ➔ ... A ➔ B ➔ ...Z ➔ A ➔ ... a ➔ b ➔ ...z ➔ a ➔ ... A0 ➔ A1 ➔ ...A9 ➔ B0 ➔ ...
Mirror 7 Press Print New Block (or ) to begin printing. The message “WORKING” appears just before printing, and then “COPIES” followed by the number of the label being printed is displayed. ☞ If the Auto cut function is set to ON, the labels will automatically be cut off after they are printed. EXAMPLE To print three door labels for studios 1, 2 and 3: Number 1 Hold down Code and press P á . Alt Caps SET START 1: S T U D I O 1 Length Undl/Frm A.
Mirror 6 Press Alt Print New Block (or ). Length Undl/Frm A.Format WORKING Caps Alt Caps Width Alt Caps Width Length Undl/Frm A.Format COPIES 2/ 3 Width Length Undl/Frm A.Format COPIES 1/ 3 Alt Caps Length Undl/Frm A.
REPEAT PRINTING FUNCTION This function allows you to print multiple copies of the same text. To use the Repeat printing function: Repeat 1 Hold down ☞ Code and press O ó . “COPIES” appears in the display. To quit the Repeat printing function without printing, hold down O (or press just ó Del and press ). 2 Type in the desired number or press displayed. 3 Press Mirror Print Code Clear Repeat or Home End until the desired number of copies is New Block (or ) to begin printing.
Mirror 3 Press Alt Print New Block (or ). Length Undl/Frm A.Format WORKING Caps Alt Caps Width Alt Caps Width Length Undl/Frm A.Format COPIES 2/ 3 Width Length Undl/Frm A.Format COPIES 1/ 3 Alt Caps Length Undl/Frm A.
MEMORY FUNCTIONS You can use the memory to store your most frequently used text files. The text remains in the memory, even after all characters are removed from the display using the Clear function (see page 59). When each file is stored, it is given a number to make recalling it easier. Up to 100 text files or about 2500 characters can be stored in the memory.
RECALLING TEXT To recall a text file: Recall 1 Hold down Code and press *8 . The file number and the beginning of the most recently stored or recalled text are displayed. ☞ Recall To quit the Recall function without recalling text, hold down Code and press *8 Clear (or press just 2 Press ☞ Home or End Del ). until the file number and text that you wish to recall are displayed. To see other parts of the displayed text file, press or . New Block 3 Press .
EXAMPLE To store text under file number 8: Store 1 Hold down Code and press & 7 . Alt Caps Length Undl/Frm A.Format STORE [0] Width 2 Press Home or End until 8 is displayed. Alt Caps New Block 3 Press Length Undl/Frm A.Format STORE [8] . Width To recall the text from file number 4: Recall 1 Hold down Code and press *8 . Alt Caps Length Undl/Frm A.Format RECALL [8]J. Smith Width 2 Press Home or End until 4 is displayed. Alt Caps Length Undl/Frm A.
To delete the text stored under file number 8: M.Del 1 Hold down Code and press ( 9 . Alt Caps CLEAR [4]NO Length Undl/Frm A.Format SMOKIN Width 2 Press Home or End until 8 is displayed. Alt Caps CLEAR [8]J. Length Undl/Frm A.Format Smith Width New Block 3 Press . Alt Caps Length Undl/Frm A.Format OK TO CLEAR? Width New Block 4 Press .
TROUBLESHOOTING Problem Solution 1. The display stays blank after you have turned on the machine. • Check that the AC adaptor is connected correctly. • If you are using alkaline batteries, check that they are correctly inserted. • If the batteries are low, replace them with new ones. 2. The machine does not print or the printed characters are blurred. • Check that the tape cassette has been inserted properly. • If the tape cassette is empty, replace it with a new one.
ERROR MESSAGE LIST Error Message 7 LINE LIMIT! Cause Solution • This message appears if seven lines already exist • Limit the number of lines in a block to seven. New Block when you press , or you delete to join two blocks, causing the block to exceed seven lines. 1 BARCODE PER BLOCK! • This message appears if a barcode has already been added to the block when you hold down Code • Limit the number of barcodes in a block to one. and Barcode press I í . 4 DIGIT MIN.
Error Message Cause Solution • This message appears if you try to enter a character, symbol, barcode, space, return, new block, or tab after 255 characters have already been entered. • Delete some existing text so that more text can be entered. • This message appears if you try to enter a character, symbol, barcode, or space in a layout field while using the Auto format function after 255 characters have already been entered. • Edit the text so that it only contains the preset number of characters.
Error Message Cause Solution • This message appears if an error occurs while data is being sent from the computer to the P-touch. • Cancel the print job, and then try printing again. • This message appears if you try to print when the baud rates of the computer and the P-touch are not the same. • Cancel the print job, and then select the same baud rate for both the computer and the P-touch. • This message appears if the text is longer than 3’ 3 1/3” (1 meter) when you try to print.
Error Message NO TAPE! Cause Solution • This message appears if you hold down Code and press • Install a tape cassette and try again. Length T or try to print a label or feed the tape when no tape cassette is installed. REPLACE BATTERIES! • This message appears if the installed alkaline batteries are about to run out. • Replace the batteries or use the AC adaptor. ROM PROBLEM! • This message appears if there is a problem with the machine’s read only memory.
Error Message Cause Solution • This message appears if a 1/4” (6-mm)-wide tape cassette is not installed when a layout for 1/4” (6-mm)-wide tape is selected. • Install a 1/4” (6-mm)-wide tape cassette. SYSTEM ERROR! • This message appears if there is a problem with the machine’s software. • Contact your service representative. TAB LIMIT! • This message appears if 50 tabs have already been added to the text when you hold • Limit the number of tabs in the text to 50.
SPECIFICATIONS HARDWARE Input device: Keyboard - 51 keys LCD: 7 × 5 dots 12 characters × 2 lines 17 indicators Print tape: Pressure-sensitive, adhesive-based 8-m long Five widths available: 1/4” (6 mm) 3/8” (9 mm) 1/2” (12 mm) 3/4” (18 mm) 1” (24 mm) Power supply: Eight AA alkaline batteries (AM3, LR6) or optional AC adaptor Auto power-off if no key is pressed for 5 minutes Print head: 128 dot / 180 dpi Dimensions: 7 25/64” (188 mm) (W) × 9 13/64” (234 mm) (D) × 2 35/64” (67 mm) (H) Weight: 2 l
ACCESSORIES ● Supplies Obtain tape cassettes from your nearest authorized dealer. Use only Brother TZ tapes with this machine. Brother cannot be held responsible for trouble caused by the use of unauthorized supplies. Do not use tapes that do not have the mark. Stock No. Description QTY/PACK AGE PRICE 1 1 1 1 1 1 1 $23.99 $23.99 $23.99 $23.99 $23.99 $26.99 $26.99 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 $20.99 $20.99 $20.99 $20.99 $20.99 $24.99 $23.99 $20.99 $20.99 $23.99 $20.99 $20.99 $24.99 $20.99 $23.
Stock No. Description QTY/PACK AGE PRICE 1 1 1 1 $14.99 $16.99 $18.99 $16.99 1 1 1 $12.99 $14.99 $17.99 3/8” (9mm)-wide laminated tapes TZ-121 TZ-221 TZ-325 TZ-421 Black characters on clear adhesive Black characters on white adhesive White characters on black adhesive Black characters on red adhesive 1/4” (6mm)-wide laminated tapes TZ-111 TZ-211 TZ-315 Black characters on clear adhesive Black characters on white adhesive White characters on black adhesive Special tapes Stock No.
P-TOUCH ACCESSORY ORDER FORM Dear Customer: This order form is provided for your convenience should your retailer not stock the item(s) needed. To order by mail, send this completed form along with proper payment to the address below OR credit card holders: Call toll-free 1-888-879-3232, fax completed order form to 1800-947-1445, or visit our web site at http://www.brothermall.com. Please refer to the Accessories listing in your User’s Guide for stock no. and price. Stock No.
P-TOUCH ACCESSORY ORDER FORM Dear Customer: This order form is provided for your convenience should your retailer not stock the item(s) needed. To order by mail, send this completed form along with proper payment to the address below OR credit card holders: Call toll-free 1-888-879-3232, fax completed order form to 1800-947-1445, or visit our web site at http://www.brothermall.com. Please refer to the Accessories listing in your User’s Guide for stock no. and price. Stock No.
GUIA DE INSTRUCCIONES
INTRODUCCIÓN Gracias por adquirir el P-touch 2400/2410! Su nuevo P-touch le permitirá diseñar y crear etiquetas y sellos para cualquier tipo de aplicación. Su versatilidad le permitirá crear etiquetas personales seleccionando distintos diseños de marcos y muchos tamaños y estilos de caracteres.
ÍNDICES GUIA DE INSTRUCCIONES PRECAUCIONES GENERALES ............................................................................. 1 PILAS .................................................................................................................. 2 ADAPTADOR DE CA OPCIONAL....................................................................... 3 CONEXIÓN DE LA P-TOUCH A UNA PC........................................................... 4 INSTALACIÓN DEL P-TOUCH EDITOR...................................
FUNCIÓN DE LONGITUD ............................................................................... 50 FUNCIÓN DE CÓDIGO DE BARRAS ............................................................... 51 FUNCIÓN DE CORTE AUTOMÁTICO.............................................................. 54 TECLA DE IMPRESIÓN & FUNCIÓN DE AVANCE Y CORTE ............................ 55 FUNCIÓN DE NUMERACIÓN .......................................................................... 56 FUNCIÓN DE IMPRESIÓN REPETIDA ............
PRECAUCIONES GENERALES • Con esta máquina emplee sólo cintas TZ Brother. No emplee cintas que no tengan la marca . • No tire de la cinta que se alimenta desde el P-touch. Podría dañar el casete de cinta. • No utilice la máquina en lugares polvorientos, y manténgala alejada de la luz solar directa y la lluvia. • No exponga la máquina a altas temperaturas ni humedad. No la deje nunca en el tablero de instrumentos ni en la parte trasera de su automóvil.
PILAS El rotulador electronico de Brother es ligero y portátil puede utilizarse en cualquier lugar instalando ocho (8) pilas alcalinas AA. Cuando cambie las pilas, reemplace siempre las ocho pilas al mismo tiempo. Para cambiar las pilas: 1 Extraiga la cubierta del compartimiento de las pilas de la parte posterior de la máquina. 2 Si ya hay pilas instaladas, extráigalas. 3 Inserte ocho pilas alcalinas AA nuevas, asegurándose de que quedan orientadas en la dirección correcta.
ADAPTADOR DE CA OPCIONAL El adaptador de CA (modelo AD-60) le permite emplear esta máquina siempre que disponga de una toma de corriente eléctrica. Para conectar el adaptador de CA opcional: Inserte la clavija del adaptador en el conector que tiene la marca DC IN 9.5V al lado derecho de la máquina. 2 Inserte la clavija del adaptador de CA en la toma de corriente más cercana. ☞ Emplee sólo el adaptador de CA diseñado exclusivamente para este equipo.
CONEXIÓN DE LA P-TOUCH A UNA PC Es equipo está equipada con un conector de interfase, que le permitirá imprimir las etiquetas y sellos que haya creado con el software P-touch Editor instalado en su PC compatible con IBM PC o Macintosh. Para conectar la P-touch al a la PC: Desconecte la alimentación tanto de la P-touch como la PC. Inserte el conector pequeño del cable de interfaz en el conector de interfase de la parte derecha del P-touch.
INSTALACIÓN DEL P-TOUCH EDITOR La instalación del software de P-touch Editor y el controlador de la impresora añadirá más funciones de ilustración y composición a las posibilidades de confección de etiquetas con su PT2400/2410. Para instalar el P-touch Editor y el controlador de la impresora en un ordenador compatible con IBM PC: Compruebe si la configuración de su sistema cumple los requisitos siguientes: Ordenador: IBM PC o compatible Sistema operativo: Microsoft Windows® 95, 98 o NT 4.
7 En el cuadro de diálogo User Information, escriba su nombre y el nombre de su compañía en los cuadros apropiados para personalizar su copia del P-touch Editor, y después haga clic en el botón Next. En el cuadro de diálogo Registration Confirmation, haga clic en el botón Yes para registrar la información introducida.
A B C En el cuadro de diálogo que aparecerá, haga clic en el botón Yes. En el cuadro de diálogo Driver Setup que aparecerá, seleccione Install y después haga clic en el botón Next. Para Windows® 95/98: Salte al paso D. Para Windows® NT 4.0: Haga clic en el botón Next. ☞ Si no hace clic enel botón Next, no se instalará el puerto PTCOM. En este caso, haga clic en el botón Add. En el cuadro de diálogo Port Name, seleccione el puerto al que haya conectado la PT-2400/2410 y después haga clic en el botón OK.
E En el cuadro de diálogo Driver Setup que aparecerá, haga clic en el botón Next para confirmar la información de instalación e iniciar la instalación del controlador de la impresora. F En el cuadro de diálogo Driver Setup que aparecerá, haga clic en el botón Next para iniciar el asistente “Change Baud Rate Wizard”. G En el cuadro de diálogo Change Baud Rate Wizard que aparecerá, seleccione el puerto en serie al que haya conectado la PT-2400/ 2410 y después haga clic en el botón Next.
I Si los ajustes son correctos, haga clic en el botón Next para introducirlos. Para cambiar los ajustes, haga clic en el botón Back. J En el cuadro de diálogo Change Baud Rate Wizard que aparecerá, haga clic en el botón Finish. K En el cuadro de diálogo Driver Setup que aparecerá, haga clic en el botón Finish para finalizar la configuración del controlador de la impresora. L En el cuadro de diálogo Setup Complete que aparecerá, haga clic en Yes, I want to restart my computer now.
☞ Para imprimir etiquetas largas o gran cantidad de datos, es posible que se necesiten algunos centenares de megabytes de espacio libre adicional. Sistema operativo: System 7.5.3 o posterior Puerto (en serie) para impresora: Conector de 8 pins Unidad de CD-ROM 2 Conecte la PT-2400/2410 al puerto en serie del ordenador y conecte la alimentación de la PT-2400/2410 y del ordenador. 3 Inserte el CD-ROM P-touch Editor en la unidad de CD-ROM del ordenador y haga doble clic en el icono del CD-ROM.
Para seleccionar la PT-2400/2410 como impresora en su ordenador Macintosh: 1 Despliegue el menú Apple y seleccione Chooser para hacer que se visualice la ventana Chooser. 2 Haga clic en el icono PT-2400/2410 de la lista de la izquierda. 3 Haga clic en el icono para el puerto de la impresora de la lista de la derecha. 4 Cierre la ventana Chooser par confirmar sus ajustes.
UTILIZACIÓN DEL-P-TOUCH EDITOR La aplicación P-touch Editor facilita a cualquier usuario el diseño y la impresión de etiquetas para casi cualquier necesidad imaginable. Activación del P-touch Editor en un ordenador compatible con PC de IBM: Haga clic sobre el icono del P-touch Editor: • Haga doble clic sobre el icono P-touch Editor 3 en la ventana del grupo P-touch Editor 3. Con el botón de Inicio: 1 Haga clic sobre el botón de Start Inicio en la barra de tareas para visualizar el menú de Inicio.
Activación del P-touch Editor en un ordenador Macintosh: • Haga doble clic sobre el icono P-touch Editor Ver3.0 en la carpeta “P-touch Editor Ver3.0” instalada en el ordenador.
DISEÑO DE UNA COMPOSICIÓN DE FORMATO AUTOMÁTICO Además de permitirle trazar dibujos y disponer texto utilizando cualquiera de las fuentes, tamaños, y estilos disponibles, el P-touch Editor dispone de gran variedad de plantillas preformateadas que facilitan y agilizan la creación de composiciones para etiquetas. Pasemos a ver lo sencillo que resulta crear la composición de una etiqueta con el comando Auto Format.
9 0 Haga clic en el botón Next. En el cuadro de diálogo Auto Format Wizard (4/4), haga clic en las opciones deseadas. A Haga clic en el botón Finish. En el área de visualización aparecerá una nueva composición que contendrá el texto preformateado. Para designar una composición en un ordenador Macintosh: En el menú File, haga clic en el comando Auto Format para hacer que se visualice el cuadro de diálogo Auto Format. 2 En el cuadro Category, haga clic en la categoría deseada.
7 8 16 Repita los pasos 5 y 6 para realizar los cambios deseados en todo el texto. Finalicemos la edición del texto cambiando el precio original por “$415.”, y el precio de venta por “$215.”. Haga clic en el gotón Close. El nuevo texto aparecerá en el área de visualización.
IMPORTACIÓN DE UN ARCHIVO DE GRÁFICOS Con la aplicación del P-touch Editor también puede importar archivos de imágenes de distintos formatos (.bmp, .dib, .jpg, .gif, .tif, .ico, y .wmf en el PC o PICT, JPEG, TIFF y BMP en el Mac) en su composición. Importación de un archivo de gráficos: 1 Con un documento de composición visualizado, seleccione la orden Image del menú Insert (en el software del PC) o el menú Object (en el software de Mac).
LECTURA DE LA GUÍA DE USUARIO La Guía de Usuario del P-touch Editor puede leerse íntroduciendo el CD-ROM en su disquetera siempre que desee remitirse a la misma o instalándola en el disco duro de modo que pueda acceder a ella rápidamente. Dado que la Guía de Usuario es un documento HTML, es necesario un navegador para poder leerlo. En el CD-ROM también está disponible el instalador para el navegador Internet Explorer 4.01.
Lectura de la Guía del P-touch Editor instalada en el disco duro en un ordenador Macintosh: Si la Guía del usuario no está instalada en el disco duro de su PC, inserte el CD-ROM P-touch editor en la unidad de CD-ROM. 2 Haga doble clic sobre Main.htm en la carpeta de User’s Guide de la carpeta P-touch del CD-ROM (si la Guía del Usuario no está instalada en el disco duro), o de la carpeta P-touch Editor Ver3.0 (si la Guía del Usuario está instalada en el disco duro).
CASETES DE CINTA Un casete de TZ se suministra con la unidad. Sin embargo, para este equipo hay disponibles una amplia gama de casetes de cinta TZ de distintos colores y tamaños, es posible crear etiquetas diferentes codificadas por colores o tamaños. Además, este equipo ha sido diseñada para permitirle cambiar los casetes de cinta rápida y fácilmente. Para cambiar el casete de cinta: 1 2 3 4 5 Levante la cubierta del compartimiento de la cinta para abrirla.
COLOCACIÓN DE ETIQUETAS CINTA LAMINADA La varilla suministrada permite que, en las cintas laminadas, usted pueda extraer facilmente el papel del dorso de la etiqueta. 1 Tome la cinta con la mano izquierda, con la superficie impresa arriba y tome la varilla con la mano derecha. 2 Pase la mitad de la cinta por el orificio estrecho largo de la varilla. 3 Gire tres cuartos de vuelta la varilla hacia usted y separe la varilla de usted como se muestra abajo. 4 Pele el papel del dorso de la etiqueta.
CABEZAL DE IMPRESIÓN Y RODILLOS De vez en cuando, motas de polvo se adhieren al cabezal de impresión y a los rodillos de la máquina. Suele suceder cuando se emplea la unidad en exteriores o en lugares con mucho polvo. Si alguna parte del cabezal de impresión está cubierta de polvo, es posible que aparezca una franja horizontal blanca por el texto de la etiqueta. Por lo tanto, al igual que con las grabadoras de cintas, el cabezal de la máquina deberá limpiarse de vez en cuando.
TECLA DEL CURSOR El visualizador de LCD de esta máquina muestra dos filas de 11 caracteres; sin embargo, el texto que usted cree puede tener hasta 255 caracteres de longitud. Podrá revisar y editar el texto empleando las teclas del cursor para moverlo y que muestre las distintas partes en el visualizador. TECLA DEL CURSOR IZQUIERDA Para mover el cursor un carácter hacia la izquierda: ● Presione una vez.
TECLA DEL CURSOR HACIA ARRIBA Para mover el cursor a la línea anterior: ● Presione una vez. ☞ Si el cursor está en la primera línea del texto, se moverá al principio de la línea. Home Para mover el cursor varias líneas hacia arriba: ● Mantenga presionado Home hasta que el cursor se mueva a la posición deseada. Para mover el cursor al principio de todo el texto: ● Mantenga presionado Code y presione Home .
TECLAS CODE, ALT Y SHIFT La mayoría de los caracteres pueden introducirse simplemente presionando sus teclas. Sin embargo, para emplear funciones especiales o para introducir letras en mayúsculas, caracteres acentuados y algunos símbolos, se requieren las siguientes teclas especiales. TECLA CODE Para emplear una función impresa encima de la tecla: ● Mantenga presionado Code y presione la tecla que está inmediatamente debajo de la función deseada.
TECLA DE RETORNO New Block Al igual que en una máquina de escribir o procesador de texto, la tecla de retorno ( ) de esta máquina se emplea para poner fin a una línea de texto y empezar otra. Cuando haya terminado de introducir una línea, presione la tecla de retorno para hacer una línea nueva y mover al cursor a la misma. ☞ Coda bloque sólo puede contener un máximo de siete líneas de texto.
FUNCIÓN DE NUEVO BLOQUE Cuando cambie el número de líneas de una sección del texto, tendrá que crear un nuevo bloque. ☞ Una etiqueta solamente podrá contener un máximo de cinco bloques. Si el cursor se New Block , encuentra en el quinto bloque cuando mantenga presionado Code y presione aparecerá el mensaje de error “5 BLOCK LIMIT!”.
TABULACIÓN Esta función le permitirá separar secciones de una línea de texto añadiendo tabulaciones. Esto le permitirá crear columnas perfectamente alineadas sin tener que introducir varios espacios. Todas las tabulaciones tendrán la misma longitud y se medirán desde el comienzo de la línea, o de la tabulación anterior, si es que existe. La longitud de las tabulaciones podrá ajustarse entre 0,0” y 11,8” (0,0 y 30,0 cm). ☞ El texto no podrá contener más de 50 tabulaciones.
TECLA DE BORRADO (DEL) Clear La tecla de borrado ( Del ) le permite eliminar caracteres situados a la izquierda de la posi- ción actual del cursor. Se diferencia de la tecla del cursor izquierda ( ) que sólo mueve el cursor sin borrar ningún carácter. La tecla de borrado también puede utilizarse para abandonar la mayor parte de funciones y volver a la visualización anterior sin cambiar el texto.
FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT) Con la función de borrado de línea, podrá sacar con facilidad una línea entera de texto. Para borrar una línea de texto: 1 Presione , , usted desee borrar. 2 Mantenga presionado Home o para situar el cursor dentro de la línea del texto que End Line out ☞ Code y presione ) 0 una vez. Line out Cada vez que se presione ) 0 mientras se tiene presionado Code se borrará la línea de texto en la que se encuentre el cursor.
FUNCIÓN DE ACENTOS La función de Acentos también puede utilizarse para añadir caracteres acentuados a su texto. Muchos de estos caracteres también pueden encontrarse en las teclas, y escribirse utilizando Symbol Alt (consulte la page 25), o podrán introducirse utilizando la función de símbolos (consulte las páginas 32). Los caracteres acentuados se agrupan de acuerdo con la letra mayúscula o minúscula con la que se combinan.
FUNCIÓN DE SÍMBOLOS Además de letras, de los símbolos y los números de las teclas, hay 67 marcas adicionales con la función de símbolos. Los siguientes símbolos están disponibles: Grupo Símbolos 1 Ü Æ æ Ã 2 + × ÷ = ã Ẽ ẽ § 2 3 ☞ ☞ 3 R Õ õ 2 3 ° 4 [ TM ] C 4 5 ♥ ★ 6 ☞ La utilización de ciertos símbolos contenidos en esta máquina etiquetadora puede estar regulada por las normas locales, nacionales, o europeas.
FUNCIÓN DE FORMATO AUTOMÁTICO La función de Formato automático agiliza y facilita la creación de etiquetas. Después de seleccionar simplemente una de las diversas disposiciones preformateadas y de escribir el texto en cada campo de la disposición, el estilo global de la etiqueta podrá cambiarse fácilmente seleccionando uno de los 7 formatos de estilos disponibles, tras lo cual la etiqueta estará lista para imprimirse.
Para cambiar el texto introducido en la disposición: A Presione Home o End hasta que se visualice el comando EDIT MORE. New Block B Presione . En el visualizador aparecerá el primer campo para la disposición seleccionada. New Block Repita el paso 4 hasta editar el texto en la forma deseada. Cuando presione después de haber editado el último campo de la disposición, volverá a aparecer SELECT MENU.
REFERENCIA No. Nombre del formato 1 VCR VHS-1 2 VCR VHS-2 3 VCR 8mm-1 4 VCR 8mm-2 5 VCR VHSC-1 6 VCR VHSC-2 7 AUDIO-1 8 AUDIO-2 9 10 AUDIO-3 11 12 DAT-1 13 DAT-2 14 MINI DISK-1 15 MINI DISK-2 16 NAME PLATE 17 Anchura de cinta × longitud de etiqueta Campos de distribución 11 SYMBOL? 3/4” × 5.5” 22 TITLE? (18 mm × 140 mm) 33 SUBTITLE? 1” × 3.0” 11 TITLE? (24 mm × 77 mm) 22 SUBTITLE? 11 SYMBOL? 3/8” × 2.9” 22 TITLE? (9 mm × 73 mm) 33 SUBTITLE? 11 SYMBOL? 1/2” × 3.
No. Nombre del formato 18 ADDRESS 19 20 EQUIPMENT 21 22 SLIDE 23 PRICE 24 25 SALE PRICE 26 27 ORGANIZER L 28 ORGANIZER S 29 FILE LONG 30 31 FILE LONGV 32 33 34 FILE SHORT 35 36 36 Anchura de cinta × longitud de etiqueta 1” × 3.1” (24 mm × 80 mm) 3/4” × 3.1” (18 mm × 80 mm) 1” × 3.1” (24 mm × 79 mm) 3/4” × 3.1” (18 mm × 79 mm) 1/2” × 1.7” (12 mm × 42 mm) 1” × 2.2” (24 mm × 57 mm) 3/4” × 2.2” (18 mm × 57 mm) 1” × 3.6” (24 mm × 92 mm) 3/4” × 3.
No. Nombre del formato 37 3.5” FLOPPY 38 39 5” FLO PPY 40 Anchura de cinta × longitud de etiqueta 1” × 2.7” (24 mm × 69 mm) 3/4” × 2.7” (18 mm × 69 mm) 1” × 3.1” (24 mm × 79 mm) 3/4” × 3.
FUNCIÓN DE CREACION DE SELLOS La función de sellos le permite crear con rapidez y facilidad sus propios clichés para sellos personalizados. Seleccione esta función para centrar automáticamente el texto y ajustar la longitud de la cinta y los márgenes a un formato perfecto para los soportes de películas de sellos entintados. Puesto que el soporte del sellos es reutilizable, haga un nuevo cliché de sellos y reemplácelo por el que hay en el soporte de películas.
FUNCIÓN DE FORMATO LOCAL La función de Formato local le permitirá hacer destacar un bloque de texto con un ajuste de tipo de caracteres, tamaño, anchura, estilo, subrayado, o recuadro diferente al resto del texto. Para utilizar la función de formato local: 1 Presione , , Home o car un formato diferente. para colocar el cursor en el bloque al que desee apli- End Local 2 3 ☞ Mantenga presionado Code y presione S una vez.
REFERENCIA Ajustes del tipo de caracters HELSINKI BRUSSELS BELGIUM US SAN DIEGO FLORIDA LOS ANGELES ISTANBUL 40 Muestras de tipos de caracters
FUNCIONES DE TAMAÑO Y DE ANCHURA El tamaño de los caracteres puede ajustarse empleando las funciones de tamaño (Size) y de ancho (Wide). Puesto que el tamaño de los caracteres que puede utilizarse depende del ancho de la cinta, la tabla siguiente indica los tamaños de caracteres que pueden utilizarse con cada ancho de cinta.
Para cambiar el ajuste del tamaño: Size 1 Manteniendo presionada Code , pulse una vez @ 2 y mantenga presionada Code para hacer que se visualice el tamaño actualmente ajustado. Size 2 Manteniendo presionada Code ,y hasta que visualice el tamaño actualmente ajus- @ 2 tado mediante el indicador del mismo. ☞ El ajuste del tamaño actual también se mostrará en el indicador de tamaño situado sobre el visualizador. 3 Para aplicar el ajuste de tamaño seleccionado a todo el texto, suelte .
FUNCIÓN DE ESTILO Podrá seleccionar entre 11 estilos de caracteres distintos que podrá aplicar a su texto. ☞ Los caracteres que se imprimen utilizando los tamaños más pequeños pueden resultar difíciles de leer si se seleccionan ciertos ajustes de estilos (por ejemplo, I+SHADOW).
FUNCIÓN DE SUBRAYADO Podrá acentuar el texto tachándolo o subrayándolo. El ajuste de subrayado predeterminado es OFF. Cuando haya ajustado la función de subrayado a ON o STRIKEOUT, el indicador Undl/Frm de la parte derecha del visualizador se encenderá. ON STRIKEOUT Para cambiar el ajuste del subrayado: Underline 1 Manteniendo presionada Code , pulse una vez % 5 y mantenga presionada Code para hacer que se visualice el subrayado actualmente ajustado.
FUNCIÓN DE MARCOS Con la función de marcos, podrá seleccionar diversos marcos y funciones destacadas para hacer un diseño más decorativo o una etiqueta con más énfasis. Los marcos disponibles son: OFF, SQUARE, ROUND, CANDY, POINTING, NAMEPLATE, DOG, MOVIE FILM, DINOSAUR, TELEPHONE, HANDS, WINDOW, BANNER, DOT, DIAMOND y SLANT El ajuste inicial de marco es OFF (normal), aunque hay también otros 15 marcos disponibles.
REFERENCIA Ajustes del marco Muestras de marco Ajustes del marco OFF (normal) DINOSAUR SQUARE TELEPHONE ROUND HANDS CANDY WINDOW POINTING BANNER NAMEPLATE DOT DOG DIAMOND MOVIE FILM SLANT 46 Muestras de marco
FUNCIÓN DE MARGENES La función de margenes le permite ajustar el tamaño de los márgenes de los lados izquierdo y derecho del texto. El ajuste inicial de margen cinta es FULL, aunque hay también disponibles otros tres ajustes. FULL (márgenes de 1” (25 mm)) NONE (márgenes de 1/6” (4 mm)) NARROW (márgenes de 1/3” (8 mm)) MEDIUM (márgenes de 1/2” (12 mm)) ☞ Cuando haya seleccionado un ajuste que no sea FULL, antes de iniciarse la impresión avanzará cinta extra.
FUNCIÓN DE LA ALINEACIÓN HORIZONTAL Podrá elegir alinear texto en una de las tres formas disponibles. Además, si utilizó la función de longitud para ajustar la longitud de la etiqueta, los texto se alinearán dentro de la etiqueta de acuerdo con el ajuste de alineación horizontal seleccionado. El ajuste inicial de la alineación horizontal es LEFT (izquierda), aunque también están disponibles otros dos ajustes.
FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO Con esta función, podrá imprimir el texto de modo que los caracteres puedan leerse desde el lado del adhesivo de la cinta. Si se adhieren etiquetas con impresión en modo espejo a un vidrio, o en otro material transparente, podrán leerse correctamente desde el lado opuesto. ☞ Cuando emplee la función de impresión en modo espejo, el texto se imprimirá en cinta transparente. El ajuste inicial para la impresión en modo espejo es OFF.
FUNCIÓN DE LONGITUD Aunque la longitud de la etiqueta impresa ajusta automáticamente dicha longitud de acuerdo con el texto introducido, es posible que usted desee hacer una etiqueta con una longitud específica. La función de longitud le permitirá ajustar la longitud de la etiqueta entre 1,6” y 11,8” (4,0 cm y 30,0 cm). El ajuste predeterminado de longitud es OFF. Cuando ponga la función de longitud en ON, se encenderá el indicador de longitud de la parte derecha del visualizador.
FUNCIÓN DE CÓDIGO DE BARRAS La función de Código de barras, que permite imprimir códigos de barras como parte de las etiquetas, es una de las características más avanzadas de la máquina. ☞ En esta sección explicaremos cómo introducir un código de barras en su texto. No tiene el propósito de ser una introducción amplia al concepto de los códigos de barras. Para encontrar información más detallada al respecto, consulte uno de los muchos libros disponibles en el mercado.
Para cambiar los ajustes de los parámetros del código de barras: 3 Presione ☞ Home . Para volver a los datos del código de barras sin cambiar ningún ajuste de parámeClear tro, presione Del o . 4 Presione 5 Presione 6 Repita los pasos 4 y 5 hasta haber ajustado todos los parámetros que desee. 7 Presione Home o hasta que aparezca el parámetro que desee cambiar. End hasta que se visualice el ajuste deseado. New Block .
VALOR CARÁCTER VALOR CARÁCTER VALOR CARÁCTER 60 \ 77 CR 93 GS 61 ] 78 SO 93 } 62 ^ 79 SI 94 RS 63 _ 80 DLE 94 ~ 64 NUL 81 DC1 95 US 64 ` 82 DC2 95 DEL 65 SOH 83 DC3 96 FNC 3 66 STX 84 DC4 97 FNC 2 67 ETX 85 NAK 100 FNC 4 68 EOT 86 SYN 102 FNC1 New Block A Presione para añadir el carácter especial seleccionado al código de barras. Para añadir el código de barras a su texto: New Block B Presione .
FUNCIÓN DE CORTE AUTOMÁTICO La función de corte automático le permite ajustar si la máquina va a cortar automáticamente o no una etiqueta después de imprimirse ésta. Active la función de corte automático antes de empezar a imprimir para cortar automáticamente las etiquetas después de imprimirlas. ☞ Después de haber impreso una etiqueta con la función de corte automático desactivada Feed&Cut (OFF), mantenga pulsada Code y presione Space una vez para hacer que avance la cinta, y después córtela.
TECLA DE IMPRESIÓN & FUNCIÓN DE AVANCE Y CORTE Después de haber introducido su texto y de haber elegidos los ajustes de formato deseados, podrá imprimir. La función de avance y corte se utiliza para hacer que la cinta avance 1” (25 mm) y se corte automáticamente, por ejemplo después de haber impreso con la función de corte automático desactivada (OFF) o cuando se haya interrumpido la impresión. Para imprimir una etiqueta: Mirror ● Presione Print una vez.
FUNCIÓN DE NUMERACIÓN Esta función podrá utilizarse para imprimir muchas copias del mismo texto aumentando ciertos caracteres (letras, números, o códigos de barras) después de la impresión de cada etiqueta. Este tipo de incremento automático será muy útil para imprimir etiquetas de números en serie, etiquetas de control de producción, u otras etiquetas que requieran códigos ascendentes. Las letras y los números aumentarán como se muestra a continuación: 0 ➔ 1 ➔ ...9 ➔ 0 ➔ ... A ➔ B ➔ ...Z ➔ A ➔ ...
6 Escriba el número deseado o presione copias deseado. 7 Para iniciar la impresión, presione o Home Mirror End hasta que se visualice el número de New Block (o Print ). Antes de que comience la impre- sión aparecerá el mensaje “WORKING” y después se visualizará “COPIES” seguido por el número de la copia que esté imprimiéndose. ☞ Si la función A.Cut está ajustada a ON, cada etiqueta se cortará automáticamente después de haberse impreso.
FUNCIONES DE LA MEMORIA Usted podrá utilizar la memoria para almacenar sus archivos de texto más frecuentemente utilizados. El texto permanecerá en la memoria, incluso después de haber eliminado todos los caracteres del visualizador utilizando la función de Borrado (consulte la page 29). Cuando se almacene cada archivo, a éste se le asignará un número para poder invocarlo fácilmente. En la memoria podrán almacenarse hasta 100 archivos de texto o aproximadamente 2500 caracteres.
INVOCACIÓN DE TEXTO Para invocar un archivo de texto: Recall 1 Mantenga presionado Code y presione *8 . Se visualizarán el número de archivo y el comienzo del texto más recientemente almacenado o invocado. ☞ Para abandonar la función de Invocación sin almacenar el texto, mantenga presioRecall nado 2 Presione invocar. ☞ Code Home o y presione End *8 Clear (o simplemente presione Del ).
SOLUCIÓN DE PROBLEMAS Problema Remedio 1. El visualizador se queda en blanco después de haber conectado la alimentación de la máquina. • Compruebe que el adaptador de CA esté correctamente enchufado. • Si está empleando pilas alcalinas, compruebe que estén correctamente insertadas. • Si las pilas están gastadas, reemplácelas por otro nuevo. 2. La máquina no imprime o los caracteres impresos quedan borrosos. • Compruebe que el casete de cinta se haya insertado correctamente.
LISTA DE MENSAJES DE ERROR Mensaje de error 7 LINE LIMIT! Causa Remedio • Este mensaje aparecerá si ya existen siete líneas cuando • Limite el número de líneas de un bloque a siete. New Block presione , o si borra para unir dos bloques, haciendo que el bloque sobrepase siete líneas. 1 BARCODE PER BLOCK! • Este mensaje aparecerá si ya se había un código de barras al bloque cuando mantenga presionado • Limite el número de códigos de barras de un bloque a uno.
Mensaje de error Causa Remedio • Este mensaje aparecerá si trata de introducir un carácter, símbolo, código de barras, espacio, retorno, nuevo bloque, o tabulación después de haber introducido ya 255 caracteres. • Borre parte del texto existente para poder introducir nuevo texto.
Mensaje de error INTERFACE ERROR! LENGTH LIMIT! Causa Remedio • Este mensaje aparecerá si ocurre un error durante la transmisión de datos del ordenador a la P-touch. • Cancele la tarea de impresión, y después trate de imprimir de nuevo. • Este mensaje aparecerá si trata de imprimir cuando la velocidad en baudios del ordenador es diferente a la de la P-touch. • Cancele la tarea de impresión y seleccione la misma velocidad en baudios para el ordenador y la P-touch.
Mensaje de error NO TAPE! Causa Remedio • Este mensaje aparecerá si mantiene presionado Code • Instale un casete de cinta y pruebe de nuevo. Length y presiona T o si intenta imprimir una etiqueta o alimentar cinta cuando haya casete de cinta instalado. REPLACE BATTERIES! • Este mensaje aparece cuando las pilas alcalinas instaladas están casi gastadas. • Reemplace las pilas o emplee el adaptador de CA.
Mensaje de error Causa Remedio • Este mensaje aparecerá si no hay un casete de cinta de 3/ 8”(9 mm) de anchura instalado cuando haya seleccionado una disposición para cinta de 3/8” (9 mm) de anchura. • Instale un casete de cinta de 3/8” (9 mm) de anchura. • Este mensaje aparecerá si no hay un casete de cinta de 1/ 4” (6 mm) de anchura instalado cuando haya seleccionado una disposición para cinta de 1/4” (6 mm) de anchura. • Instale un casete de cinta de 1/4” (6 mm) de anchura.
Mensaje de error TEXT TOO LONG! Causa Remedio • Este mensaje aparece si la longitud del texto es mayor que la longitud que se ha ajustado para la etiqueta utilizando la función de longitud. • Borre algo de texto, reduzca el ancho de los caracteres o incremente la longitud ajustada de la etiqueta. • Este mensaje aparecerá si intenta introducir texto más largo que el de la longitud preajustada de un campo de plantilla de la función Formato automático. • Borre parte del texto.
ESPECIFICACIONES HARDWARE Dispositivo de entrada: LCD: Teclado de 51 teclas Cinta de impresión: Sensible a la presión, base adhesiva, 8 m de longitud Cinco anchos disponibles: 1/4” (6 mm) 3/8” (9 mm) 1/2” (12 mm) 3/4” (18 mm) 1” (24 mm) Alimentación: 8 pilas alcalinas AA (AM3, LR6) o adaptador de CA opcional Desconexión automática de la alimentación si no se pulsa ninguna tecla durante 5 minutos Cabezal de impresión: Dimensiones: 128 puntos / 180 dpi Peso: 2lbs (900 g) (sin casete de cinta ni pilas
ACCESORIOS ● Accesorios de consumo Adquiera los casetes de cinta en el distribuidor autorizado que le quede más cerca. Emplee sólo cintas Brother TZ con esta máquina. Brother no puede hacerse responsable por los problemas causados por el empleo de accesorios de consumo no autorizados. No emplee cintas que no tengan la marca . N.º de producto Descripción CANT./ PAQUETE PRECIO 1 1 1 1 1 1 1 $23.99 $23.99 $23.99 $23.99 $23.99 $26.99 $26.99 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 $20.99 $20.99 $20.99 $20.
N.º de producto Descripción CANT./ PAQUETE PRECIO 1 1 1 1 $14.99 $16.99 $18.99 $16.99 1 1 1 $12.99 $14.99 $17.99 CANT./ PAQUETE PRECIO 1 $29.99 1 $24.99 CANT./ PAQUETE PRECIO 1 $39.99 1 $37.99 1 $27.99 1 $24.99 CANT./ PAQUETE PRECIO 1 1 $24.99 $24.
Printed in China LA0986001A