Owner's manual
Table Of Contents
- INTRODUCTION
- CONTENTS
- Getting Started
- Learning the Ropes
- For Your Information
- POWER KEY
- CURSOR KEYS
- CODE, ALT & SHIFT KEYS
- SPACE KEY
- RETURN KEY
- NEW BLOCK FUNCTION
- TAB FUNCTION
- DELETE KEY
- LINE OUT FUNCTION
- CLEAR FUNCTION
- ACCENT FUNCTION
- SYMBOL FUNCTION
- AUTO FORMAT FUNCTION
- STAMP FUNCTION
- LOCAL FORMAT FUNCTION
- FONT FUNCTION
- SIZE & WIDTH FUNCTIONS
- STYLE FUNCTION
- UNDERLINE FUNCTION
- FRAME FUNCTION
- TAPE MARGIN FUNCTION
- HORIZONTAL ALIGNMENT FUNCTION
- MIRROR PRINTING FUNCTION
- LENGTH FUNCTION
- BARCODE FUNCTION
- AUTO CUT FUNCTION
- PRINT KEY AND FEED & CUT FUNCTION
- NUMBERING FUNCTION
- REPEAT PRINTING FUNCTION
- MEMORY FUNCTIONS
- TROUBLESHOOTING
- ERROR MESSAGE LIST
- SPECIFICATIONS
- ACCESSORIES
- Spanish
- INTRODUCCIÓN
- ÍNDICES
- PRECAUCIONES GENERALES
- PILAS
- ADAPTADOR DE CA OPCIONAL
- CONEXIÓN DE LA P-TOUCH A UNA PC
- INSTALACIÓN DEL P-TOUCH EDITOR
- UTILIZACIÓN DEL-P-TOUCH EDITOR
- DISEÑO DE UNA COMPOSICIÓN DE FORMATO AUTOMÁTICO
- IMPORTACIÓN DE UN ARCHIVO DE GRÁFICOS
- LECTURA DE LA GUÍA DE USUARIO
- CASETES DE CINTA
- COLOCACIÓN DE ETIQUETAS
- CABEZAL DE IMPRESIÓN Y RODILLOS
- TECLA DEL CURSOR
- TECLAS CODE, ALT Y SHIFT
- TECLA DE RETORNO
- FUNCIÓN DE NUEVO BLOQUE
- TABULACIÓN
- TECLA DE BORRADO (DEL)
- FUNCIÓN DE BORRADO DE LÍNEA (LINE OUT)
- FUNCIÓN DE REPOSICIÓN (CLEAR)
- FUNCIÓN DE ACENTOS
- FUNCIÓN DE SÍMBOLOS
- FUNCIÓN DE FORMATO AUTOMÁTICO
- FUNCIÓN DE CREACION DE SELLOS
- FUNCIÓN DE FORMATO LOCAL
- FUNCIÓN DEL TIPO DE CARACTERES
- FUNCIONES DE TAMAÑO Y DE ANCHURA
- FUNCIÓN DE ESTILO
- FUNCIÓN DE SUBRAYADO
- FUNCIÓN DE MARCOS
- FUNCIÓN DE MARGENES
- FUNCIÓN DE LA ALINEACIÓN HORIZONTAL
- FUNCIÓN DE IMPRESIÓN EN MODO ESPEJO
- FUNCIÓN DE LONGITUD
- FUNCIÓN DE CÓDIGO DE BARRAS
- FUNCIÓN DE CORTE AUTOMÁTICO
- TECLA DE IMPRESIÓN & FUNCIÓN DE AVANCE Y CORTE
- FUNCIÓN DE NUMERACIÓN
- FUNCIÓN DE IMPRESIÓN REPETIDA
- FUNCIONES DE LA MEMORIA
- SOLUCIÓN DE PROBLEMAS
- LISTA DE MENSAJES DE ERROR
- ESPECIFICACIONES
- ACCESORIOS
92
TAPE MARGIN FUNCTION
The Tape margin function allows you to adjust the size of the margins on the left and right
sides of your text.
The default tape margin setting is FULL; however, three other settings are also available.
FULL (1” (25 mm) margins)
NONE (1/6” (4 mm) margins)
NARROW (1/3” (8 mm) margins)
MEDIUM (1/2” (12 mm) margins)
☞
When a setting other than FULL is selected, extra tape is fed out before printing starts.
The extra tape is cut off if the Auto cut function is set to ON so that the margins on each
side of the text are equal.
To change the tape margin setting:
1 While holding down , press once, and keep held down to display the
current tape margin setting.
2 While still holding down , continue pressing until the desired tape margin set-
ting is displayed.
3 Release to apply the selected tape margin setting to the entire text.
EXAMPLE
To select the MEDIUM tape margin setting:
1
While holding down , press
once, and keep held down.
2 While still holding down , con-
tinue pressing until MEDIUM is dis-
played.
3 Release .
CodeCode
Tape
E
Tape
E
CodeCode
CodeCode
Tape
E
Tape
E
CodeCode
FEED
Alt
Caps
FULL
Width
Length
A.Format
Undl/Frm
Length
CodeCode
Tape
E
Tape
E
CodeCode
FEED
Alt
Caps
MEDIUM
Width
Length
A.Format
Undl/Frm
Length
CodeCode
Tape
E
Tape
E
CodeCode