User`s guide
88
Although the length of the printed label automatically adjusts to fit the length of the entered
text, there may be times when you will want to make a label with a specific length. The
Length
function allows you to set the label length between 4.0 cm and 30.0 cm.
The default length setting is
OFF
. When the
Length
function is set to
ON
, the
Length
indicator
on the right side of the display comes on.
To change the length setting:
1
Rotate
+
until
12/21 LENGTH
is displayed, and then press
+
(OR while holding
down
c
, press
T
once, and keep
c
held down) to display the current length
of the label (the text and both margins) briefly, then display the current label length setting
(
ON
or
OFF
).
2
Rotate
+
(OR while still holding down
c
, continue pressing
T
) until the
desired label length setting is displayed.
☞
The
Length
indicator comes on when
ON
is selected.
3
Press
+
(OR release
c
). If
ON
was selected, the current label length setting is dis-
played.
4
Rotate
+
(OR press
h
or
e
) until the desired length is displayed, or use the
number keys to type in the length.
☞
To change the length in 1.0-cm-steps, hold down either
h
or
e
, and then
release the key when the desired setting is displayed.
5
Press
+
(OR press
r
).
EXAMPLE
To select a label length of 12 cm:
1
While holding down
c
, press
T
once, and keep
c
held down.
LENGTH FUNCTION
8.3cm
LENGTH
Caps
Alt
Caps
Alt
OFF
LENGTH
PT-2450-1.book Page 88 Friday, June 27, 2003 6:27 PM