ELECTRONIC LABELING SYSTEM E110 User’s Guide English
ELECTRONIC LABELING SYSTEM E110 User’s Guide English Thank you for purchasing a Brother P-touch labeling system! Use your new Brother P-touch labeling system to create a wide variety of custom, self-adhesive labels. This P-touch labeling system uses Brother TZe or HGe tapes. TZe and HGe tape cassettes are available in many color and sizes. For a complete list of tapes compatible with your P-touch labeling system, visit us at: www.brother.com.
Tape Exit Slot 4 Cutter Edge Tape Guides Toothed Wheel AC Adapter Jack End of Tape Insert the Tape Cassette following the drawing marked inside the case. Gently press the Cassette into the P-touch labeling system until it clicks into place. • Make sure your Tape Cassette is marked or • Use only Brother TZe or HGe tapes with this machine. . Close the Cassette Cover and gently press until it clicks into place. NOTE If you prefer to use the optional AC Adapter (AD24) instead of using batteries: 1.
LCD 5 6 1 7 2 3 4 8 1. Size 5. Cable Wrap 2. Cursor 6. Cable Flag If a specific label length has 3. Shift 7. Faceplate been selected, 8. Label Length also appears. 4. Caps NOTE • The LCD displays one row of 15 characters; however, the text you enter can be up to 80 characters in length. • Label length displayed on LCD may differ slightly from the actual label length when printed.
Keyboard 12 1 2 13 14 3 4 5 6 15 16 17 18 19 7 8 20 9 21 10 22 11 23 1. Menu key 9. Shift key 17. Cable Flag key 2. Power key 10. Caps key 18. Faceplate key 3. Cursor key : Left (Use with Shift 11. Accent key 19. Serialize key 12. Tape Cutter lever 20. Backspace key 4. Escape key 13. Clear key 21. Enter key 5. OK key 14. Print key 22. Symbols key 6. Cable Wrap key 15. Preview key 23. Space key 7. Text key 16. Cursor key : Right (Use with key to go to top of the text.) 8.
Initial Settings 1 2 Turn on your P-touch labeling system. Supply power using six AAA batteries or the optional AC Adapter (AD24), and then press on the power. to turn Set the language. The default setting is [English]. / / [Language] [English/Español/Français/Hrvatski/ Italiano/Magyar/Melayu/Nederlands/Norsk/Polski/Português/Portug. (BR)/Românã/ Slovenski/Slovenský/Suomi/Svenska/Türkçe/ýeština/Dansk/Deutsch] 3 . Set the unit of measurement. The default setting is [inch].
Supplies and Accessories Cassettes: See the included Supplies and Accessories Guide. AC Adapter: Cutter Unit: AD24 TC-4 (replacement) If the cutter blade becomes blunt after repetitive use and the tape cannot be cut cleanly, turn the cutter board as shown in the illustration 1. If you still have difficulties, replace with new cutter unit (stock no. TC-4) from an authorized Brother reseller. X Replacing the Cutter Unit 1.
2 BASIC USAGE Entering Text You can enter a maximum of 80 characters and spaces for a text label. To cancel any operation, press . X Switching Upper Case / Lower Case X Entering Tabs / • The tab symbol tab in the text. [Tab] appears when you insert a X Changing Tab Length Upper case Lower case ( ( ON) / OFF) / [Tab Length] [Auto / 0.0"-4.0" (0-100mm)] Caps Caps X Creating Two-Line Tapes Move the cursor to where you want to start the next line and press . Use either 0.35" (9mm) or 0.
Saving Tapes Files X Changing Label Length / / You can save and reuse the text and settings for up to nine different labels. Each tape holds up to 80 characters (including spaces). Assign a number (1-9) to each saved file so you can reuse it, and edit or overwrite stored files as needed. [Label Length] [Auto / 1.2"-12.0" (30-300mm)] X Saving a new file NOTE (Enter text) • The lock symbol appears when you set a specific tape length.
Text Key 1 Symbols Key Press to select the settings to enter X Entering Symbols the text. / (Select category) (Select an item) / (Select a symbol) • Refer to the Symbols table in this guide. 2 Press Size / to select the settings. . • Select History to view up to seven recently-used symbols. • You can also insert Symbols by pressing the shortcut keys, as shown below.
Printing Labels X Setting Margins X Preview / • Pressing the Preview key displays a preview of the label, and may differ from the actual one when printed. • If the LCD cannot display all the text at once, press / to display the hidden text. • Press / / to exit Preview mode. [Margin] [Full / Half / Narrow / Chain / Print] [Full] / [Half] / [Narrow] Use one of these options to customize margin length before and after your text. The printed dots (:) indicate the end of the label.
3 LABEL APPLICATION KEYS Cable Wrap Cable Flag Use this function to create a label that can be wrapped around a cable or wire. Use this function to create a label that can be wrapped around a cable or wire with its ends applied together to form a flag. Turn on the Cable Rotate/Repeat function to print text repeatedly along the length of the label so that it can easily be read from any angle. • To activate the Text Repeat function, press and then select [CableRot/Rpt].
Faceplate Serialize Use this function to create a label that can be used to identify various components, or panels. Use this function to create multiple labels with a number or letter automatically incremented on each label. Using the Faceplate function ensures that each block of text is evenly spaced on a single label. / (Select a faceplate length) This serializing function can also be used with the Cable Wrap, Cable Flag, or Faceplate templates to save time entering and printing a series of labels.
4 HELPFUL HINTS Shortcuts Language If you have questions or need information about your Brother product, please visit us online or call. Space key For FAQs, Troubleshooting, and Manuals, visit support.brother.com. Undl/Frame To order supplies and accessories, visit www.brothermall.com or call 1-877-552-6255.
Category Symbols Symbols Symbols Punctuation Brackets Bullets Super/ Subscript Mathematics Arrows Currency Greek Electrical Datacom AV/Security Safety Accented Characters
Troubleshooting X Error messages Message Battery Low! Cause / Remedy The batteries are weak. If using AAA alkaline batteries, replace them with new ones (do not use a combination of old and new batteries). If using Ni-MH batteries, charge them fully. Battery Empty! The installed batteries are exhausted and need to be replaced for continued operation. Invalid! • An invalid number was entered as the label length, tab length, cable diameter, flag length or faceplate length.
X What to do when Problem Solution The display • Check that the batteries are remains correctly installed. Refer to the Installing Power Supply and blank after Tape Cassette section. you have turned on • The batteries may be weak. the P-touch Replace them. labeling • Check that the AD24 Adapter is system. correctly connected.
