Raster Command Reference

- 37 -

4. Printing Command Details

g Raster graphics transfer

ASCII: g {n1} {n2} {d1} ... {dk}

Hexadecimal: 67 {n1} {n2} {d1} ... {dk}

Description

⚫ Transfers the specified number of bytes (k) of data.

⚫ The data is expanded by overwriting from the position where the margin was added.

⚫ If the expanded data does not reach the end of the expansion buffer, the remainder is filled with 0 data.

⚫ If the expanded data exceeds the end of the expansion buffer, the excess is cut off.

Parameters

{n1}{n2} Specified number of bytes k = n1 + n2*256

0000h ≦ Specified number of bytes k ≦ First positive number that exceeds the value

of the number of print head pins divided by 8 (Gauss number)

{n} Number of bytes of raster data (d1 to dk)

However, use the following value if no compression is specified as the compression mode.

PT-H500/P700/E500：n=16

{d1~dn} Raster data.

Z Zero raster graphics

ASCII: Z

Hexadecimal: 5A

Description

⚫ Fills raster line with 0 data.

FF Print command

ASCII: FF

Hexadecimal: 0C

Description

⚫ Used as a print command at the end of pages other than the last page when multiple pages are printed.