User's Guide
Table Of Contents
- USER’S GUIDE PT-E500
- Contents
- EDITING A LABEL
- LABEL PRINTING
- USING THE FILE MEMORY
- USING P-TOUCH SOFTWARE
- Using P-touch Editor
- Using P-touch Transfer Manager (For Windows)
- How to Use P-touch Transfer Manager
- Transferring the Label Template to P-touch Transfer Manager
- Using P-touch Transfer Manager
- Transferring Templates or Other Data from the Computer to the P-touch Labeling System
- Backing Up Templates or Other Data Saved in the P-touch Labeling System
- Deleting All the P-touch Labeling System data
- Using the Data Transferred to the P-touch Labeling System
- Using P-touch Library
- RESETTING & MAINTENANCE
- TROUBLESHOOTING
- APPENDIX
LABEL PRINTING
16
Printing a Label
Printing a Single Page
Press Print key to start printing.
Printing a Range of Pages
When there are multiple pages, you can specify the range of pages to print.
Press the Print key. The screen you can specify the range is displayed.
Select "All", "Current" or "Range" by using or key. If you select "All" or "Current",
go to step 4.
Specify the first page and the last page.
Press the OK or Enter key to print.
Printing Multiple Copies
Using this function you can print up to 99 copies of the same label.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Press the Shift key and then press the Print key to display the Copies screen, and then
select the number of copies to be printed using the or key, or type the number
using the number keys.
Press the OK or Enter key. "Printing... Copies" is displayed while
the labels are being printed.
1
2
3
Blank pages are not printed.
4
1
2
Hold down the or key to change the number of copies faster.
If you select an automatic cutting option when printing multiple
copies of a label, a message will be displayed to confirm
whether you want the labels to be cut after each label is printed.
To disable the message display, press the Menu key, select
"Advanced" using the or key, and then press the OK or
Enter key. Select "Cut Pause" using the or key, and then
press the OK or Enter key. Select "Off" using the or key,
and then press the OK or Enter key.
3
• Press the Esc key to return to the previous step.
• The figures shown on the screen during printing indicate the "count / number of copies set".
• Pressing the Space key when setting the number of copies resets the value to 01, the
default.
• When the message "Press Print to Cut Tape and Continue" is displayed, press the
Print key. To set whether the tape is cut after each label is printed, use "Cut Option".
For details, refer to "Tape Cutting Options" on page 13.
• To print a label created using the transferred template, refer to "Using the Data
Transferred to the P-touch Labeling System" on page 38.