User's Guide
Table Of Contents
- USER’S GUIDE PT-E500
- Contents
- EDITING A LABEL
- LABEL PRINTING
- USING THE FILE MEMORY
- USING P-TOUCH SOFTWARE
- Using P-touch Editor
- Using P-touch Transfer Manager (For Windows)
- How to Use P-touch Transfer Manager
- Transferring the Label Template to P-touch Transfer Manager
- Using P-touch Transfer Manager
- Transferring Templates or Other Data from the Computer to the P-touch Labeling System
- Backing Up Templates or Other Data Saved in the P-touch Labeling System
- Deleting All the P-touch Labeling System data
- Using the Data Transferred to the P-touch Labeling System
- Using P-touch Library
- RESETTING & MAINTENANCE
- TROUBLESHOOTING
- APPENDIX
8
1
2
3
4
5
6
7
49
Maintenance
RESETTING & MAINTENANCE
Your P-touch labeling system should be cleaned on a regular basis to maintain its
performance and life span.
Cleaning the Unit
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
Cleaning the Print Head
Streaks or poor quality characters on printed labels generally
indicates that the print head is dirty. Clean the print head using a
cotton swab or the optional print head cleaning cassette (TZe-CL4).
1. Print head
Cleaning the Tape Cutter
Tape adhesive can build up on the cutter blades after repeated use,
dulling the blade which may result in the tape jamming.
Maintenance
Always remove the batteries and disconnect the AC adapter before cleaning the P-touch
labeling system.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may
deform the case or damage the appearance of your P-touch labeling system.
• Do not touch the print head directly with your bare hands.
• Refer to the instructions provided with the print head cleaning
cassette for directions on how to use it.
• About once every year, wipe the cutter blade using a cotton
swab moistened with isopropyl alcohol (rubbing alcohol).
• Do not touch the cutter blade directly with your bare hands.
1