User's Guide (BRAdmin Professional 4)
Table Of Contents
- BRAdmin Professional 4 User’s Guide
- Copyright
- Trademarks
- Important Note
- Table of Contents
- 1 Introduction
- 2 Manage Devices
- 3 Actions
- 4 Instant Tasks
- 5 Scheduled Tasks
- 6 Task Monitoring
- 7 Application Settings
- 7.1 General
- 7.2 Configure the Device Discovery Settings
- 7.3 Configure the Network Settings
- 7.4 Configure the Email Server Settings
- 7.5 Secure the Application with a Password
- 7.6 Device Master Settings
- 7.7 Create a Device Log Profile
- 7.8 Create a Device Notification Profile
- 7.9 Create a Device List Profile
- 7.10 Information
- 7.11 Back Up and Restore the Application's Settings and Data
- 8 Troubleshooting and Support
10
4. In the Backup setting items: field, select either All, or Selected: to specify the necessary items.
5. Select the Exclude checkbox if you do not want to include device-specific settings, such as the IP address or
node name, in
the backed-up file.
6. Click Back up.
• Do not change the file name if you want to deploy the backup file via a USB flash drive.
USB deployments require a specific file name format.
• Some models create an SSF file.
4.8 Reset Network Settings
For all models, this function resets the following settings to their default values:
- IP address
- Node name
- Location
- Contact
Depending on the model, other settings may also be reset.
1. Select one or more devices.
2. Click Reset network settings.
3. Type the Device password.
4. Click Reset.