User's Guide
Table Of Contents
- GETTING STARTED
- Power Supply and Tape Cassette
- 1 Insert the two hooks at the bottom of thecassette cover into the slots on the labelmaker.
- 2 Securely close the cassette covermaking sure it snaps into place.
- NOTE
- 1. Insert the plug on the adapter cord into the AC adapter jack on the bottom end of the label maker.
- 2. Insert the plug into the nearest standard electrical outlet.For memory backup, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03) togetherwhen using the AC adapter.
- LCD
- Initial Settings
- Keyboard
- Power Supply and Tape Cassette
- GETTING STARTED (Continued)
- BASIC USAGE
- BASIC USAGE (Continued)
- Printing Labels (continued)
- 1. Enter text.
- 2. Press , then [Copies: ] appears.
- 3. Press / or enter number withnumber keys to select the number of copies.
- 4. Press . Printing starts, and then themessage "Feed OK?" appears.
- 5. Press to enter more text.
- 6. Clear the text, enter the text for the next label,and then press .
- 7. When the message "Feed OK?" appears afterthe last label is printed, press .
- 8. After the tape is fed, press the cutter lever tocut off the chain of labels.
- Printing Labels (continued)
- Saving Label Files
- Printing Labels (continued)
- USING TEMPLATES
- FORMATTING KEYS
- OTHER
- HELPFUL HINTS
- HELPFUL HINTS (continued)
