How to start P-touch Editor Before using this printer, be sure to read this Online User’s Guide. We suggest that you keep this manual in a handy place for future reference.
Introduction Important Notice The contents of this document and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publications.
Installing P-touch Editor and the Printer Driver When Printing via a USB Connection Visit our website described below and download the necessary software. The installation instructions are available on the download page. http://www.brother.
Using P-touch Editor You will need to install P-touch Editor and the printer driver to use your printer with your computer. To download the latest driver and software, please visit the Brother Solutions Center at: http://support.brother.com/ When printing via a USB connection, check that the Editor Lite lamp is not lit. If the Editor Lite lamp is lit, press and hold down the Editor Lite button until the lamp goes off.
b Select an option in the screen. 4 3 1 5 2 1 To create a new layout, click the [New Layout] button. 2 To create a new layout using a pre-set layout, select the desired category button. 3 To connect a pre-set layout to a database, select the check box next to [Connect Database]. 4 To open an existing layout, click [Open]. 5 To open the application for easily creating labels for electrical equipment management, click the [Cable Labeling Wizard] button.
Printing with P-touch Editor Express mode This mode allows you to quickly and easily create layouts that include text and images. The [Express] mode screen is explained below: You can print by selecting [Print] from [File] in the menu bar or by clicking the [Print] icon. (Configure the printing settings in the [Print] screen before printing.) Professional mode This mode allows you to create layouts using a wide-range of advanced tools and options.
Snap mode This mode allows you to capture all or a portion of your computer screen content, print it as an image, and save it for future use. a Click the [Snap] mode selection button. The [Description of Snap mode] dialog box is displayed. b Click [OK]. The [Snap] mode palette is displayed. Using P-touch Editor (For Macintosh) Starting P-touch Editor a Double-click the [P-touch Editor] icon on the desktop. Note The following method can also be used to start P-touch Editor.
