www.brother.
Contents.............................................................................................................................................. i z CONTENTS Contents INTRODUCTION................................................................................................ 1 Brother® One-Year Limited Warranty and Replacement Service (USA Only)................................................................................................................................... 2 Important Information .
CONTENTS Printing the Label ....................................................................................................................... 37 Saving the Label ........................................................................................................................ 38 Opening an Existing Label File .................................................................................................. 38 Creating Bar Code Labels ..............................................................
INTRODUCTION We strongly recommend that you read this User’s Guide carefully before using your QL-500/550, and then keep it nearby for future reference. z INTRODUCTION Congratulations on purchasing the QL-500/550. Your new QL-500/550 is a label printer that connects to your personal computer, enabling you to quickly and easily print professional custom labels that you have created on your personal computer using the label editing software provided.
INTRODUCTION Brother® One-Year Limited Warranty and Replacement Service (USA Only) Who is covered: • This limited warranty ("warranty") is given only to the original end-use/retail purchaser (referred to in this warranty as "Original Purchaser") of the accompanying product, consumables and accessories (collectively referred to in this warranty as "this Product").
z INTRODUCTION What Brother will do: If the problem reported concerning your Machine and/or accompanying Consumable and Accessory Items is covered by this warranty and if you first reported the problem to Brother or an Authorized Service Center within the applicable warranty period, Brother or its Authorized Service Center will repair or replace the Machine and/or accompanying Consumable and Accessory Items at no charge to you for parts or labor.
INTRODUCTION Limitations: Brother is not responsible for damage to or loss of any equipment, media, programs or data related to the use of this Product. Except for that repair or replacement as described above, Brother shall not be liable for any direct, indirect, incidental or consequential damages or specific relief. Because some states do not allow the exclusion or limitation of consequential or incidental damages, the above limitation may not apply to you.
Should you have questions, or need information about your Brother Product, we have a variety of support options for you to choose from: USA-Customer Service: Customer Service 877-478-6824 (voice) z INTRODUCTION Important Information Customer Service 901-379-1210 (fax) Automated Faxback 800-521-2846 World Wide Web www.brother.com Supplies / Accessories www.brothermall.com or 888-879-3232 BROTHER INTERNATIONAL CORPORATION 100 SOMERSET CORPORATE BLVD.
INTRODUCTION General Precautions QL-500/550 • The QL-500/550 is a precision machine. Do not drop, hit or otherwise bang the QL-500/550. • Do not grab and lift the QL-500/550 by the DK Roll compartment cover. The cover could come off and the QL-500/550 could fall and become damaged. • The QL-500/550 may malfunction if left near a television, radio, etc. Do not use the QL-500/550 near any machine that can cause electromagnetic interference. • Do not expose the QL-500/550 to direct sunlight.
z INTRODUCTION • When peeling a DK Die-cut Label, some portion of the label may remain. Remove the remaining portion before attaching a new label. • Do not drop the DK Roll, or damage to the DK Roll could result. • Do not use CD/DVD labels in a slot loading CD/DVD player, for example a CD player in a car where the CD is slid into a slot in the CD player. • Do not peel off the CD/DVD label once it is applied to the CD/DVD. A thin surface layer may come off, resulting in damage to the disk.
INTRODUCTION Symbols Used in this Guide The following symbols are used throughout this guide to indicate additional information of varying degrees of importance. This symbol indicates information or directions that should be followed - if ignored, the result may be damage, injury, or failed operations. This symbol indicates information or directions that can help you better understand or use the QL-500/550 more efficiently.
GETTING STARTED Check that the package contains the following before using your QL-500/550. If any item is missing or damaged, please contact the retail outlet where the QL-500/550 was purchased. P-touch QL-500/550 QL-500 QL-550 USB cable Quick Start Guide (English and Spanish) CD-ROM DK Label & Tape Guide Starter roll Warranty Card The QL-500 includes one starter roll of DK Die-cut Standard Address Labels (100 labels).
GETTING STARTED QL-500/550 Components QL-500/550 Label Printer Front QL-500 DK Roll compartment cover QL-550 DK Roll compartment cover FEED button FEED button LED lamp CUT button ON/OFF button LED lamp CUT lever ON/OFF button If the DK Roll compartment cover is left open, dust will collect on the print head. Always close the cover. Back QL-500/QL-550 Power cord USB port Do not connect the QL-500/550 to the USB port of your personal computer yet.
The functions of the buttons on the QL-500/550 are described below. Button ON/OFF button CUT button (QL-550 only) FEED button Condition Turns power to the QL-500/550 on and off. Cuts the label from the DK Roll. Use this button to cut labels when the "Auto Cut" option in the Print dialog box is unchecked. • When using DK Die-cut Labels, feeds the DK Label Roll to the beginning of the first label on the roll.
GETTING STARTED Connecting to the Power Supply 1 Plug the power supply cord into a standard electrical outlet. • Check that the electrical outlet is 120 V before inserting the plug. • Remove the power supply cord from the electrical outlet after you have finished using the QL-500/550. • Do not pull the cord when removing it from the electrical outlet. The wire in the cord may become damaged. Do not connect the QL-500/550 to the USB port of your personal computer yet.
There is a wide range of DK Rolls available for use with your QL-500/550, allowing you to create almost any type of label you need. Available supplies The types of DK Rolls that may be used with the QL-500/550 are listed below. DK Die-cut Paper Labels A roll of pre-cut paper labels. DK Die-cut Film Labels A roll of pre-cut film labels that durable in water. DK Durable Paper Tape A roll of continuous paper tape for printing labels of varied length.
GETTING STARTED 3 Lift the label lever and then thread the end of the DK Roll into the slot immediately before the cutter. When unable to thread the end of the DK Roll to the slot, thread it as far as possible, lower the label lever and close the cover, then press the FEED button to set the roll. 4 Lower the label lever and then close the DK Roll compartment cover.
INSTALLING SOFTWARE Install the following label editor software and printer driver on your personal computer to design professional labels and print them on your QL-500/550. P-touch Editor Version 4.1 Use this powerful label design software to create a wide variety of custom labels such as address labels, file folder labels, CD/DVD labels, etc. P-touch Editor Version 4.
INSTALLING SOFTWARE Installing the Software The installation procedure differs depending on the operating system running on your personal computer. Refer to the installation procedure for the appropriate operating system to install the software. Refer to “When using Microsoft Windows 98 SE” on page 21 for the installation procedure for that operating system.
Carefully read the license agreement. If you agree to the terms and conditions of the license agreement, click [Yes] to continue installation. The Customer Information dialog box appears. 4 Enter your “User Name” and the “Company Name”, and then click [Next]. z INSTALLING SOFTWARE 3 The Setup Type dialog box appears.
INSTALLING SOFTWARE 5 Select the type of setup you prefer. Change the default destination folder if you wish to place the program files elsewhere, and then click [Next]. • Click [Browse] to select an alternate destination folder. • Select “Custom” to install a particular feature. For example, to install the printer driver only. The following items will be installed.
z INSTALLING SOFTWARE 7 Review the settings to ensure all are correct, and then click [Next]. If the settings are incorrect, click [Back] to go back and correct. • The InstallShield Wizard completes preparations for installing the software, and then the Setup Status dialog box appears. • After all files necessary to install the Ptouch Editor have been copied and registered, the Driver Setup dialog box appears.
INSTALLING SOFTWARE 9 Check that the QL-500/550 is turned on, and then plug the connector on the USB cable into the USB port on your personal computer. When the QL-500/550 is recognized, the installer proceeds with the driver software installation. When connecting the QL-500/550 to a personal computer via a USB hub, a proper connection may not be possible due to the type of hub used. If this occurs, connect the QL-500/ 550 directly to the personal computer.
z INSTALLING SOFTWARE When using Microsoft Windows 98 SE 1 Start your personal computer and insert the CD-ROM into the CD-ROM drive. A dialog box appears briefly while the InstallShield Wizard prepares for installation. When the preparation is complete, the InstallShield Wizard welcome dialog box appears. • It may take a short time for the dialog box to appear. • If the dialog box does not appear, navigate to the contents of the CD-ROM, and then double-click the “Setup.exe” icon.
INSTALLING SOFTWARE 4 Enter your “User Name” and the “Company Name”, and then click [Next]. The Setup Type dialog box appears. 5 Select the type of setup you prefer. Change the default destination folder if you wish to place the program files elsewhere, and then click [Next]. • Click [Browse] to select an alternate destination folder. • Select “Custom” to install a particular feature. For example, to install the printer driver only. The following items will be installed.
z INSTALLING SOFTWARE 6 Specify where to add shortcuts (for easy, one click access) for Brother Software, and then click [Next]. If you do not want a shortcut created for an area, clear the check box for that area. Clear all check boxes to add no shortcuts. The Start Copying Files dialog box appears. 7 Review the settings to ensure all are correct, and then click [Next]. If the settings are incorrect, click [Back] to go back and correct.
INSTALLING SOFTWARE 8 When the Driver Setup dialog box instructs you to connect the QL-500/ 550, plug the connector on the USB cable into the USB port on the back of the QL-500/550. 9 Check that the QL-500/550 is turned on, and then plug the connector on the USB cable into the USB port on your personal computer. The Add New Hardware Wizard dialog box appears. When connecting the QL-500/550 to a personal computer via a USB hub, a proper connection may not be possible due to the type of hub used.
z INSTALLING SOFTWARE 12 Click [Next]. The next Add New Hardware Wizard dialog box appears. The settings displayed on the screen may vary depending on the operating environment the software is being installed on. The software will automatically make the appropriate settings, so it is not necessary to change these settings. 13 Click [Next]. The next dialog box appears. The remainder of this procedure varies depending on the dialog box that appears next.
INSTALLING SOFTWARE 14 Proceed with one of the following. When the Add New Hardware Wizard dialog box appears. Click [Finish]. The new hardware has been detected. Return to step 10. When an error dialog box appears. Refer to Error Recovery on page 28 to correct the error. When the Add Printer Wizard dialog box appears. Click [Finish]. The new hardware has been detected. Go to step 15. 15 26 Click [Finish]. The User Registration dialog box appears.
z INSTALLING SOFTWARE 16 Select on option and then click [Next]. When “Yes, display the page.” is selected, the online user registration web page is opened in your web browser. When “No, do not display the page.” is selected, installation continues. The InstallShield Wizard Complete dialog box appears. 17 Click [Finish]. Installation of the P-touch Editor software is now completed. You may be required to restart your personal computer after installation.
INSTALLING SOFTWARE Error recovery (when installing printer driver on Microsoft Windows 98 SE) 1 Click [OK]. The Driver Setup dialog box appears. 2 Click [Cancel]. The Confirmation dialog box appears. 3 Turn the QL-500/550 off, and the click [Yes]. The dialog box displayed before beginning to install the printer driver appears. 4 Turn the QL-500/550 on. The Add New Hardware Wizard dialog box appears and you can resume installation from step 10.
If for any reason you need to remove the software from your personal computer, follow these steps to uninstall the software. Uninstalling P-touch Editor Version 4.1 This procedure removes the P-touch Editor software and associated software files. The printer driver is not removed by this procedure. 1 Start (→ Settings) → Control Panel → Add or Remove Programs → Brother P-touch Editor Version 4.1 (/Brother P-touch Quick Editor) → Change/Remove (Add/Remove...
INSTALLING SOFTWARE 4 Click [Finish] to complete the uninstall. The uninstall process is now completed. Uninstalling the Printer Driver This procedure removes the printer driver from the personal computer. 1 2 Turn off the P-touch and remove the USB cable from your personal computer. Open the Printer control panel (Printers and Faxes for Windows® XP (Home/ Professional)). For details, refer to Windows Help.
Using the QL-500/550 as a Shared Printer The QL-500/550 can be shared by multiple personal computers connected by a network. To share the QL-500/550, connect the QL-500/550 to a computer and set it to be a shared device. The QL-500/550 can now used as a network label printer.
CREATING LABELS Overview This section describes the general procedure for creating labels using your QL-500/550. Refer to the sections indicated for details and additional information related to each operation. 1 Choose the label you want to create shown below are a few label samples. Your QL-500/ 550 includes a standard address label. Picture the type of label you want to create. 2 Insert the appropriate DK Roll. Select the appropriate DK Roll for the label you are creating. Insert the DK Roll.
4 Enter the text. There are two main methods of entering text on the label. Enter text with P-touch Editor our easy to use label creation software. Enter text into a Microsoft Office software application and use our Add-In feature. p. 34 or P-touch Editor Help p. 51 or P-touch Editor Help z CREATING LABELS 3 Edit the label. P-touch Editor provides a variety of editing functions. Use the tools in the Draw toolbar and Object dock to edit the label.
CREATING LABELS Starting P-touch Editor 1 To start P-touch Editor, click the Start button on the task bar, point to All Programs (or Programs), point to Ptouch Editor 4.1, and then click P-touch Editor. You can also start P-touch Editor by double-clicking the short-cut icon on the desktop or clicking the short-cut icon in the Quick Launch Tray if these were created during installation. When P-touch Editor starts, the layout selection dialog box appears.
After installing and starting the software, you are now ready to create your own labels. While you can create a wide range of labels using P-touch Editor, there is generally a common work flow for creating any label. Select the type and size of label ¾ Enter text ¾ Apply formatting to text ¾ Add decorative objects to the label ¾ Print the completed label z CREATING LABELS Using P-touch Editor Each process in this work flow is described in the following sections.
CREATING LABELS Creating an Address Label This section describes the process of creating an address label as an example. In this example we will create a standard sized address label with the addressee’s name in bold and a slightly larger font size, and with a simple single-line frame with rounded corners. 1 In the Page properties box, select Standard Address from the pull-down list of label types. The tape length and width settings are automatically set to the size of a standard address label.
z CREATING LABELS Printing the Label We will now print the label created in the earlier example. 1 In the Print properties box, select the number of copies to be printed (1) and then click . The label is printed. If the Print property box is not displayed in the Property dock click to open it. 2 Cut off the printed label using the CUT button (QL-550) or the CUT lever (QL-500).
CREATING LABELS Saving the Label You can save the label you have created in a file for later use. 1 Click in the Standard toolbar. The Save As dialog box appears. When the current label layout has already been saved, changes are saved to the existing file name. 2 Navigate to the folder where you want to save the file, enter the file name, and then click . The label layout is saved in the location specified.
You can create labels with bar codes for use with cash registers, stock control systems or other bar code reader systems. 1 In the Page properties box, select Normal Format from the pull-down list of label types. The tape length and width settings are automatically set to the size of a standard address label. If the Page property box is not displayed in the Property dock click 2 Click the in the Object dock. The Bar Code Properties dialog box appears.
CREATING LABELS • Brother shall not assume any responsibility for any loss or damage caused by bar code labels being misread. • If the bar code reader is not able to read bar code labels printed using the "Give priority to print speed" option, try using the "Give priority to print quality" option. • The bar code reader may not be able to read bar code labels with narrow bar codes. • The QL-500/550 is not designed exclusively for creating bar code labels.
The following are examples of the variety of labels that can be created using P-touch Editor and some optional features. Refer to How To in the online P-touch Editor Help for further details.
CREATING LABELS Using Help P-touch Editor has its own Help application that offers further detailed information on the features available with P-touch Editor and how to use these features. Opening Help 1 Start P-touch Editor. Refer to “Starting P-touch Editor” on page 34. The layout window appears. 2 Select “P-touch Editor Help” from the Help menu or use F1. The P-touch Editor Help window appears. 1 2 3 4 1. Toolbar Contains quick and easy access icons used in Help. 2.
1 Select a topic in the Contents tab. 2 Click on the toolbar. The Print Topics dialog box appears. 3 z CREATING LABELS Printing Help The contents of the Help topics can be printed to a standard printer (not the QL-500/550). Select the range of topics to be printed, and then click . The Print dialog box appears. 4 Select any options for your standard printer, and then click The specified Help topics will be printed. .
CREATING LABELS The Label List The Label List is a built-in database for storing information from previously created labels or for potentially new labels. How the Label List Works The Label List is displayed in the Label List window, and works similarly to a Database connection. Refer to “Using a Database” on page 58 for a details about conecting to a database.
z CREATING LABELS Form view Displays the selected record data in a form rather than as a list. Field name Field data Using the Label List As an example we will create a set of address labels using the Label List. Before beginning, create a new layout and select the label size. Refer to “Creating an Address Label” on page 36. The label list would be used when a user wishes to print (reprint) a label containing the stored information.
CREATING LABELS 4 To add the next record, right click in the Label List window, and select “Create New Record” from the pull down menu. A new record appears in the list. 46 5 Enter the name and address, etc., in the new record. 6 Repeat steps 4 and 5 to add more records.
The label layout can now be created using the fields in the Label List as a guide. What is a Layout Style? • A Layout Style lets you easily use a variety of previously registered label layouts. • You can also register new layouts you have created and quickly and easily recall these for use again later. When is this useful? • You can easily create labels by simply selecting a Layout Style then just entering text in the layout displayed in the P-touch Editor's Layout window.
CREATING LABELS 2 Select the appropriate layout for the label you want to create, and then click . The Merge Fields dialog box appears. Each label size has default Layout Style. For each, the layout style used the last time for that specific label size will be automatically saved and used the next time. 3 On the new layout, each field has a name, indicated in the Merge Fields dialog box as Layout Object. For each field, assign an object from the Label List.
z CREATING LABELS 2 To add the field from the Label List to the label layout, click on the field selector of the field you want to add to the label, and then drag and drop it on the layout. A pop-up menu appears. 3 Select “Text” from the pop-up menu. The field is added to the layout and displayed as text. If “Bar Code” is selected, the field is added and displayed as a bar code. 4 Repeat steps 1 and 2 to add more fields to the layout.
CREATING LABELS Printing labels from the Label List 1 Click in the Print properties box to open the Print dialog box and select the print options. Refer to “Print Options” on page 37 for details. The “Auto Cut” option is not available when using the QL-500. 2 Select a Print Range option to select which records are printed. Refer to the Print Range Options table for details. 3 Click The specified labels are printed.
If during software installation the Add-In feature was selected, an Add-In function is also installed for Microsoft Word, Microsoft Excel and Microsoft Outlook (provided these applications are installed on your personal computer). Using these Add-In functions, you can quickly and easily create a label by highlighting the information and clicking the P-touch icon.
CREATING LABELS Microsoft Word You can start the P-touch Add-In and copy the highlighted data directly onto a label from Microsoft Word. The highlighted data is copied as text and automatically added to a new record created in the Label List. The Title and Body fields of the new record are then merged into a new label layout, which is displayed in the Add-In Preview window.
Click in Microsoft Word’s standard toolbar. P-touch Editor starts and the Add-In Preview window appears showing the newly created label. Toolbar z CREATING LABELS 2 Preview window Displays a preview of the label with the copied data Add-In Preview window toolbar Print button Prints the current label. Print Settings button Opens the Print dialog box. Check Media button Checks the size of the DK Roll currently inserted in the QL-500/550. Change Paper Setting Opens the Paper Settings dialog box.
CREATING LABELS 3 Click to print the label. To edit or customize the text or label layout, click . The full P-touch Editor screen appears and you can edit the label. How Microsoft Word data is added to the Label List A new record is automatically created and the text in the selected data is added to the following fields. • The current date is added to the Date field. • The first line is added to the Title field. • All remaining lines are added to the Body field.
Click in Microsoft Excel’s standard toolbar. P-touch Editor starts and the Add-In Preview window appears showing the newly created label. z CREATING LABELS 2 • Refer to P-touch Editor Help for other methods of starting P-touch Editor from within Microsoft Excel. • An error message appears if there is no data highlighted, or if the data highlighted contains an object not supported by P-touch Editor.
CREATING LABELS • Uncheck the "Label List" checkbox in the Add-In Preview window when you do not want to register the data in the Label List. • The data is copied onto a label formatted with the default Layout Style. To change the Layout Style, click to open the full P-touch Editor screen and edit the layout or apply a different Layout Style. Refer to “Creating Labels Using a Layout Style and Data from the Label List” on page 47 for details.
3 Click z CREATING LABELS • Refer to P-touch Editor Help for other methods of starting P-touch Editor from within Microsoft Outlook. • An error message appears if there is no data highlighted, or if the data highlighted contains an object not supported by P-touch Editor. • Refer to “How Microsoft Outlook data is added to the Label List” on page 57 for details of how the selected data is automatically added to the Label List. to print the label. To edit or customize the text or label layout, click .
CREATING LABELS Using a Database What is the database function? The database function allows you to use existing data from another source to quickly create custom labels containing database content - for example name/address labels or inventory labels with codes. The supported formats are mdb (MS Access), csv (generic format) and xls (MS Excel). Creating a name badge label using a database This procedure describes how to retrieve the database information and associate it to the layout.
Navigate to the file containing the data to be used for the labels and open the file. We will be using MS Excel data for this example. After opening the database file, the Database window appears below the Layout work area. 5 Click on the field selector of the field you want to add to the label, for this example we will use the Name field, and then drag and drop it on the layout. The field is added to the layout.
CREATING LABELS 6 Use the Text Properties dialog box to update the font, position and size of the new field. 7 Repeat steps 4 and 5 to add more fields to the layout. Once you have competed editing the layout, the label is ready to be printed. You can check the layout and content of each label by selecting the corresponding record in the Database window. You can also move from record to record by using the "Next Record" and "Previous Record" buttons in the "Database Properties" box.
Print the label(s) using one of the methods below • To print the label currently displayed in the Layout work area by itself, click in the Print Properties box. • To print several labels, hold down the [Ctrl] key and select the records in the Database window for the labels you want to print, and then click in the Print Properties box. •To print labels for all records, click the Print Setup button. Select “All Records” for “Print Range” and click to print the labels.
APPENDIX Maintenance Your QL-500/550 may need cleaning from time to time, particularly if you are using it in a dusty environment. Cleaning the Print Head The DK Paper Roll used in the QL-500/550 is designed to automatically clean the print head. As the DK Paper Roll passes over the head during printing or label feeding, the print head is cleaned. If necessary, simply feed the DK Paper Roll using the FEED button to clean the print head.
z APPENDIX 4 Thread the end ( 1 ) of the Cleaning Sheet into the slot immediately before the cutter. • Do not peel off section ( 1 ) of the sheet. • Make sure that the printed surface of the Cleaning Sheet is facing up. 5 After the Cleaning Sheet is inserted in the slot, peel of section ( 2 ) of the sheet. 6 7 Turn on the QL-500/550. Press and hold the FEED button for at least one second. The roller rotates for 4" (10 cm). • The length of the Cleaning Sheet is 3" (8.5 cm).
APPENDIX Changing Cutter Unit Repeated use of the cutter unit will eventually reduce the sharpness of the blade. When this occurs, purchase a replacement cutter and then follow this procedure to replace the cutter. Refer to Accessories on page 67 for details on purchasing a replacement cutter. 1 Turn off the QL-500/550 and unplug the power code from the electrical outlet. 2 Open the DK Roll compartment cover, lift up the label lever, and remove the DK Roll from the compartment.
z APPENDIX Troubleshooting What to do when... Problem The QL-500/550 does not print, or a printing error is received. The power button does not light up or flash. The printed label contains streaks or poor quality characters, or the label is not fed correctly. A data transmission error appears on the personal computer. Labels are jammed in the cutter or are not ejected correctly after printing. Layout style is not updated when Add-in is still activated and a new label roll is installed.
APPENDIX Specifications QL-500 / QL-550 Item Display Specification LED lamp (green) Printing method Direct thermal printing via thermal head Max.90mm/sec, Max.50labels/min. (Standard Address Labels) 300 dpi/720 dot 2.3"(59mm) 1" (25 mm) Printing speed Printing Buttons Interface Power source Dimensions Weight Cutter Print head Maximum Printing Width Minimum printing length ON/OFF button FEED button CUT button (QL-550 only) USB (USB Spec. 1.1 protocol) AC 120 V 60 Hz (0.
Brother recommends the use of genuine Brother accessories with your QL-500/550. The use of other products may effect the print quality or may damage your QL-500/550. The following supplies and accessories are available for your QL-500/550 and can be ordered directly from Brother should your retailer not stock them. z APPENDIX Accessories (For USA Only) DK Rolls DK Die-cut Label Stock No. DK-1201 DK-1208 DK-1209 DK-1202 DK-1203 Description Price Standard Address Labels, 1-1/7" x 3-1/2" (29.
APPENDIX APPENDIX Index A AC power cord ......................................... 7 Accessories ............................................. 67 Add-In function ....................................... 51 Add-In Preview window ...................... 53 Add-In software ...................................... 15 Add-Ins ...................................................... 22 Administrator ........................................... 15 Auto Cut ....................................................
P M Q Maintenance ........................................... 62 Manuals .............................................. 18, 22 Merge Fields ........................................... 48 Merge Fields function .......................... 47 Microsoft Excel ....................................... 54 Microsoft Outlook .................................. 56 Microsoft Word ....................................... 52 N Name badge ........................................... 58 Network printer ....................
APPENDIX T Text icon ................................................... 36 Text properties ....................................... 35 Title field ....................................... 54, 55, 57 Troubleshooting ..................................... 65 Typical setup ..................................... 18, 22 U USB cable .................................................. 9 USB port ................................................... 10 © 1993-2004 Brother Industries, Ltd.
z APPENDIX APPENDIX Contact Information Service Center Locations If you need a local service center, please call 1-800-284-HELP (4357) to locate the authorized service center closest to you. Note: Be sure to call the Service Center before your visit. Service centers do not provide operational assistance. See “Operational Assistance”.
