Introduction FRANÇAIS STEP Getting started 1 For Windows® Installing the software 2 For Macintosh® Setup & Operation Guide Guide d'installation et de configuration STEP STEP Label overview 3 STEP Be sure to read and understand this guide before using the machine. We recommend that you keep this guide nearby for future reference. Veillez à lire attentivement et bien comprendre ce guide avant de commencer à utiliser l’appareil.
Thank you for purchasing the Brother QL-570. This guide briefly describes the steps to start using the Brother QL-570. See the User's Guide for details. The User's Guide can be found in the Manuals folder of the included CD-ROM. We strongly recommend that you read this guide carefully before using the Brother QL-570, and then keep it nearby for future reference. We provide service & support for users who register their products on our website.
1 Introduction •••••••••••••••••••••••••••••••••••••••••••••••••••• 1 Contents ••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 1 General Infomation •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 2 Safety precautions••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 3 General Precautions •••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 5 1 Getting started ••••••••••••••••••••••••••••••••••••••••••••••••• 7 STEP 1 2 Unpacking the Brot
2 General Infomation Compilation and Publication Notice Under the supervision of Brother Industries Ltd., this guide has been compiled and published, covering the latest product’s descriptions and specifications. The contents of this guide and the specifications of this product are subject to change without notice.
Read and understand all of these instructions and save them for later reference. Follow all warnings and instructions marked on the product. Warning Tells you what to do to avoid the risk of injury. Caution Tells you about procedures you must follow to prevent damage to the machine. The symbols used in this guide are as follows: Action NOT allowed to do DO NOT disassemble the product. DO NOT splash the product with or immerse the product in water. DO NOT touch a given portion of the product.
4 Warning Follow these guidelines to avoid fire, electric shock, or other damage. Power Cord Use only the authorized power source (120V AC) for the machine. Use only the power cord included with the machine. Do not handle the power cord or plug if your hands are wet. Do not overload the electrical outlet sockets with too many appliances or plug the power cord into a damaged electrical outlet. Do not cut, damage, alter or place heavy objects on the power cord. Do not use the power cord if it is damaged.
General Precautions The Machine • Never disassemble the machine or allow it to get wet to avoid possible fire or electrical Introduction 5 • Use only the power cord included with the machine. • If the machine will not be used for an extended period, unplug the power cord from the electrical outlet. • Always hold the power cord when unplugging the power cord from or plugging it into electrical outlet. Do not pull on the power cord. The wire in the electrical cord may become damaged.
6 • As the end of the DK Roll is designed to not adhere to the label spool, the last label may not be cut properly. If this happens, remove the remaining labels, insert a new DK Roll, and reprint the last label. Note: To account for this, the number of DK Labels included on each DK Roll may be more than indicated on the package. • If a label is removed after begin applied to a surface, some portion of the label may remain. Remove the remaining portion before attaching a new label.
7 1 Unpacking the Brother QL-570 Check that the package contains the following before using the Brother QL-570. If any item is missing or damaged, contact your Brother dealer.
8 STEP1 Getting started 2 Parts Description Main Printing Unit Front Rear DK Roll compartment cover Power cord Label tray USB port FEED CUT LED ON/OFF button button lamp button 3 Setting the DK Roll 1 Make sure that the Brother QL-570 is turned off. Hold the DK Roll compartment cover at the front of the Brother QL-570 and firmly lift up to open the cover. 2 Put the spool into the spool guides in the DK Roll compartment.
3 Thread the end of the DK Roll into the slot until it align to the area shown right. Align the end of the roll with the upright edge of the label output slot. Introduction 9 STEP 4 Close the DK Roll compartment cover. When you press the ON/OFF button ( ) to turn the Brother QL-570 on, the end of the DK Roll is aligned automatically. Getting started 1 STEP Check that the electrical outlet is 120V AC before plugging the power cord.
10 STEP1 Getting started
11 1. When using Microsoft® Windows® This section explains how to install the P-touch® Editor 5.0, P-touch® Address Book 1.1, Printer Driver, and User's Guide as a whole. The procedure for installing them varies depending on the OS of the computer. The following is the example for Windows Vista®. Install procedure is subject to change without notice. 1 Start the computer and put the CD-ROM into the CD-ROM drive. 2 Click "Standard Installation".
12 STEP2 Installing the software 5 Put a check mark in the box to install the Add-in and click [Next]. Make sure that you closed all Microsoft® Office applications. For details on the Add-in, see the "User's Guide (PDF)". 6 Click [OK] and follow the on-screen instructions of the driver installation. 7 Follow the on-screen instructions. When this screen appears, make sure to turn on the computer. Connect the USB interface cable to your computer, and then connect it to the machine.
Here explains the example of Mac OS® X 10.4.9. 1 Start up Macintosh®, and insert the CD-ROM into CD-ROM drive. 2 Click [Mac OS X] folder and double click [P-touch Editor 5.0 Installer]. QL-570 screen is displayed. When it does not start up automatically, double click QL-570 (CD-ROM) icon. Follow the on-screen instructions. 3 After the installation is completed and the screen shown right is displayed, click [Done]. The installation of software is completed. Next, install the printer driver.
14 STEP2 Installing the software 6 After restarting the computer, connect the USB cable to the machine. Power cord slot As the caution label is put on the USB port of the machine, remove it and then connect the USB cable. Power cord USB port USB cable 7 Connect the USB cable to the USB port of Macintosh®. Press ON/OFF button ( ) of the machine to turn on the power. When connecting the machine to Macintosh® via USB hub, it may not be connected correctly.
15 STEP Getting started 1 STEP For Windows® Installing the software 2 For Macintosh® Choose the type of label you want to create. STEP 3 Label overview Here are the sample labels that you can create with Brother QL-570. There is a variety of labels to choose from. Go to Page 20 for more information.
16 STEP3 Label overview 2 General Procedures This section describes the general procedure for creating labels. 1 Create the label data. Enter text directly using P-touch® Editor, or copy text from a Microsoft® Office application. Use P-touch® Editor's variety of editing functions to format and decorate your label. • Enter text in P-touch® Editor. • Copy text from Microsoft® Office. (for Windows®) For details on how to create the labels, see the Help. 2 Print the label.
3 Start P-touch® Editor Help This section explains how to start P-touch® Editor Help for Windows® and Mac®. For Windows® The following is the example for Windows Vista®. Introduction 17 STEP 1 To start P-touch® Editor Help, click the Start button on the task bar, point to All Programs (or Programs). Click [Brother P-touch] and [P-touch Editor 5.0 Help]. Getting started Start from Start button STEP Start from P-touch® Editor • In the Layout Window, Click the Help on the menu bar.
18 STEP3 Label overview For Mac® The following is the example for Mac OS® X 10.4.9. Start from P-touch® Editor • The New/Open dialog box appears, click Help- How To. • In the Layout Window, click the Help and choose P-touch® Editor Help.
19 Reference Introduction Main specifications Product specifications Specifications 1 Direct thermal printing via thermal head Speed of printing Max. 4.3 inch (110 mm)/sec, Max. 68 labels/min. (Standard Address Labels) Print head 300 dpi/720 dots Max. printing width 2.3 inch (59 mm) 0.5 inch (12.7 mm) Durable automatic cutter Button ON/OFF button ( Interface USB Power supply 120V AC 60 Hz 1.8 A ), FEED button ( ), CUT button ( ) 2 Size 5.3" (134 mm) × 8.2" (208 mm) × 5.
20 STEP4 Reference Accessories Brother recommends the use of genuine Brother accessories with the Brother QL-570. The use of other products may effect the print quality or may damage the Brother QL-570. The following supplies and accessories are available for the Brother QL-570 and can be ordered directly from Brother should your retailer not stock them. Availability of accessories subject to change without notice. DK Rolls DK Die-cut Label Stock No.
Introduction ÉTAPE Comment démarrer 1 Installation du logiciel 2 Pour Macintosh® Pour Windows® Setup & Operation Guide Guide d'installation et de configuration ÉTAPE ÉTAPE Présentation des étiquettes 3 ÉTAPE Veillez à lire attentivement et bien comprendre ce guide avant de commencer à utiliser l’appareil. Nous vous recommandons de le conserver à portée de la main afin de pouvoir vous y reporter en cas de besoin.
Merci d'avoir choisi le modèle QL-570 de Brother. Ce guide décrit brièvement les étapes nécessaires pour commencer à utiliser votre QL-570. Consultez le Guide de l'utilisateur pour obtenir des compléments d'information. Le Guide de l'utilisateur se trouve dans le dossier Manuels du CD-ROM livré avec l'appareil. Il est vivement recommandé de lire attentivement ce guide avant d'utiliser le QL-570 de Brother et le conserver à portée de main pour pouvoir vous y référer.
1 1 2 Déballage du Brother QL-570 ••••••••••••••••••••••••••••••••••••••••••••••• 7 Description des pièces : •••••••••••••••••••••••••••••••••••••••••••••••••••••• 8 3 4 Installation du rouleau DK•••••••••••••••••••••••••••••••••••••••••••••••••••• 8 Connexion de l'alimentation électrique •••••••••••••••••••••••••••••••••••• 9 Unité d'impression principale•••••••••••••••••••••••••••••••••••••••••••••••••••••••••• 8 2 Installation du logiciel •••••••••••••••••••••••••••••••••••••••• 11 ÉTAPE ÉTAPE In
2 Informations générales Avis de rédaction et de publication Ce guide a été préparé et publié sous la supervision de Brother Industries Ltd. et contient les descriptions et les spécifications les plus récentes du produit. Le contenu de ce guide et les spécifications de ce produit sont sujets à modification sans préavis.
Lisez attentivement toutes ces instructions afin de bien les comprendre. Veuillez les conserver pour consultation ultérieure. Respectez toutes les mises en garde et consignes indiquées sur le produit. Avertissement Vous indique ce qu'il faut faire pour éviter tout risque de blessure. Mise en garde Décrit les procédures à suivre pour éviter d'endommager l'appareil. Ce guide utilise les symboles suivants : Action NON autorisée NE démontez PAS le produit.
4 Avertissement Suivez ces directives pour éviter les incendies, chocs électriques ou autres dommages. Cordon d’alimentation Utilisez seulement la source d’alimentation autorisée (120V AC) pour l'appareil. Utilisez seulement le cordon livré avec l'appareil. Ne touchez pas au cordon d'alimentation et ne le branchez pas si vos mains sont mouillées. Ne surchargez pas les prises secteur avec trop d'appareils et ne branchez pas le cordon d'alimentation dans une prise secteur abimée.
Cordon d’alimentation • Utilisez seulement le cordon d'alimentation livré avec l'appareil. • Si l'appareil n’est pas utilisé pour une longue période de temps, débranchez le cordon ÉTAPE 1 Comment démarrer possibilités d'incendies ou de chocs électriques. Ne débranchez pas le cordon d’alimentation et ne le branchez pas dans la prise électrique avec des mains mouillées. Vous risqueriez de provoquer un choc électrique ou un incendie. • Ne touchez pas au coupe-ruban. Vous risqueriez de vous blesser.
6 • N'exposez pas les rouleaux DK à un ensoleillement direct, des températures élevées, une forte humidité ou de la poussière. Conservez-les dans un endroit frais et sombre. Utilisez les rouleaux DK dès leur déballage. • Rayer la surface imprimée de l'étiquette avec vos ongles ou des objets métalliques ou toucher la surface imprimée avec des mains mouillées avec de l'eau, de la sueur ou une crème de soin, etc., peut entraîner une modification ou une dégradation des couleurs.
7 1 Déballage du Brother QL-570 Vérifiez que le paquet contient les composants suivants avant de commencer à utiliser votre Brother QL-570. S'il manque un composant ou si un composant est endommagé, veuillez contacter votre revendeur Brother.
8 ÉTAPE 1 Comment démarrer 2 Description des pièces : Unité d'impression principale Avant Arrière Couvercle du logement du rouleau DK Cordon d’alimentation Plateau d'étiquettes Port USB Bouton Bouton Voyant Bouton Avance COUPE DEL Marche/ papier Arrêt 3 Installation du rouleau DK 1 Mettez le QL-570 de Brother hors tension. Maintenez le couvercle du rouleau DK à l'avant du QL-570 de Brother et levez-le fermement pour l'ouvrir.
Insérez l'extrémité du rouleau DK dans la fente jusqu'à ce que le rouleau soit aligné sur la zone indiquée sur la droite. Alignez l'extrémité du rouleau sur le bord supérieur droit de la fente de sortie des étiquettes. 4 Fermez le couvercle du logement du rouleau DK. Lorsque vous appuyez sur le bouton Marche/Arrêt ( ) pour mettre le QL-570 de Brother sous tension, l'extrémité du rouleau DK s'aligne automatiquement.
10 ÉTAPE 1 Comment démarrer
11 Installation du logiciel Installation du logiciel 1. Avec Microsoft® Windows® 1 Démarrez l'ordinateur, puis insérez le CD-ROM dans son lecteur. 2 Cliquez sur « Installation standard ». S’il ne démarre pas automatiquement, ouvrez les fichiers du CD-ROM, puis double-cliquez sur l’icône « Setup.exe ». 1 ÉTAPE 3 Affichage du guide de l'utilisateur Guide de l'utilisateur (PDF) 4 Téléchargement d'Adobe Reader Le lien d'accès à la page de téléchargement d'Adobe® Reader® s'affichera.
12 ÉTAPE 2 Installation du logiciel 5 Cochez la case pour installer le module complémentaire et cliquez sur [Suivant]. Veillez à fermer toutes les applications Microsoft® Office. Pour plus de détails concernant le module complémentaire, reportez-vous au « Guide de l'utilisateur (PDF) ». 6 Cliquez sur [OK] et suivez les instructions qui s'affichent pour installer le pilote. 7 Suivez les consignes qui s'affichent à l'écran. Quand cet écran s'affiche, vérifiez que l'appareil est allumé.
terminée. S'il est connecté, débranchez le câble USB du Macintosh®. • Quand vous installez l'appareil, connectez-vous en tant qu'administrateur. Exemple pour Mac OS® X 10.4.9. 1 Démarrez Macintosh®, puis insérez le CD-ROM dans son le lecteur. 2 Cliquez sur le dossier [Mac OS X], puis double-cliquez sur [P-touch Editor 5.0 Installer]. L'écran QL-570 s'affiche. Si le démarrage ne se fait pas automatiquement, double-cliquez sur l'icône QL-570 (CD-ROM). Suivez les consignes qui s'affichent à l'écran.
14 ÉTAPE 2 Installation du logiciel 6 Après avoir redémarré l'ordinateur, connectez le câble USB à l'appareil. Comme l’étiquette d'avertissement couvre le port USB de l'appareil, retirez-la et branchez le câble USB dans ce port. 7 Connecteur du cordon d’alimentation Cordon d’alimentation Port USB Câble USB Connectez le câble USB au port USB du Macintosh®. Appuyez sur le bouton Marche/Arrêt ( ) de l'appareil pour mettre l'appareil sous tension.
15 ÉTAPE Comment démarrer 1 ÉTAPE Installation du logiciel 2 Pour Macintosh® Pour Windows® Choisissez le type d’étiquette à créer. ÉTAPE 3 Présentation des étiquettes Voici les exemples d'étiquettes que vous pouvez créer avec l'imprimante Brother QL-570. Vous avez le choix entre différents types d'étiquettes. Reportez-vous à la page 20 pour plus d'informations.
16 ÉTAPE 3 Présentation des étiquettes 2 Procédures générales Cette rubrique décrit la procédure générale pour créer des étiquettes. 1 Créez les données de l’étiquette. Entrez directement le texte à l’aide du P-touch® Editor ou copiez du texte à partir d’une application Microsoft® Office. Utilisez l’assortiment de fonctions d’édition de P-touch® Editor pour formater et décorer votre étiquette. • Entrez le texte dans P-touch® Editor • Copiez du texte à partir d’une application Microsoft® Office.
3 Accès à l'aide de P-touch® Editor Cette rubrique explique comment démarrer l'aide de P-touch® Editor pour Windows® et Mac®. Pour Windows® ÉTAPE Pour lancer l'aide de P-touch® Editor, cliquez sur Démarrer dans la barre des tâches puis pointez sur Tous les programmes (ou Programmes). Cliquez sur [Brother P-touch] et [P-touch Editor 5.0 Help]. A partir de Editor • La boîte de dialogue Nouveau/ouvrir s'affiche. Cliquez sur Aide - Comment.
18 ÉTAPE 3 Présentation des étiquettes Pour Mac® L'explication suivante correspond à Mac OS® X 10.4.9. A partir de P-touch® Editor • La boîte de dialogue Nouveau/ouvrir s'affiche, cliquez sur Aide - Comment. • Dans la fenêtre de mise en page, cliquez sur l'Aide et choisissez Aide de P-touch® Editor.
19 Voyant DEL (vert, rouge, orange) Impression Méthode d'impression Impression thermique directe via la tête thermique Vitesse d'impression Max. 4,3 po (110 mm)/sec, max. 68 étiquettes/min.
20 ÉTAPE 4 Référence Accessoires Brother recommande d'utiliser des accessoires Brother d'origine avec le QL-570 de Brother. L'utilisation d'autres produits peut détériorer la qualité de l'impression ou endommager l'appareil. Les fournitures et accessoires suivants sont disponibles pour l'appareil Brother QL-570 et peuvent être commandés directement auprès de Brother si votre revendeur ne les propose pas. Disponibilité des accessoires sujets aux modifications sans avis préalable.
Printed in China Imprimé en Chine LB6975001 A