Software User's Guide
Table Of Contents
- Contents
- Introduction
- Creating Labels
- Label creation overview
- How to use P-touch Editor for Windows®
- How to use the P-touch Address Book (Windows® only)
- How to use P-touch Transfer Manager (QL-650TD / 580N / 1050 / 1060N / 720NW only) (Windows® only)
- How to use the P-touch Library (Windows® only)
- Transferring label templates with P-touch Transfer Express (QL-720NW only) (Windows® only)
- How to use P-touch Editor Lite (QL-700 only) (Windows® only)
- How to use P-touch Editor Lite LAN (QL-710W / 720NW only) (Windows® only)
- Using the P-touch Update Software
- Printing labels using P-touch templates (QL-580N / 720NW / 1050 / 1060N only)
- Printing labels distributed to multiple printers (QL-710W / 720NW only) (Windows® only)
- How to use P-touch Editor for Macintosh
- Appendix
Updating P-touch Editor Lite (Windows® only) / QL printer firmware
37
IntroductionCreating LabelsAppendix
Updating P-touch Editor Lite (Windows
®
only) /
QL printer firmware
1 Turn the machine on and connect the USB cable.
Confirm the Editor Lite is turned off before connecting the Brother QL printer to your computer with the
USB cable. Press and hold down the Editor Lite button until the Editor Lite lamp turns off.
2 Double-click the [P-touch Update Software] on the desktop.
3 Click the [Machine update] icon.
4 Select the [Printer], ensure that [The
machine is connected correctly.] is
displayed, and then click [OK].
For Windows
®
users, the following method can also be used to start the P-touch
Update Software.
Click [Start], and then select [All Programs] - [Brother P-touch] - [P-touch Update
Software].