User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
How to Update P-touch Software
104
13
c Click the Machine update icon.
d Select the Printer, make sure that The machine is connected correctly. message appears, and then
click OK.
e Select the Language, select the check box next to the firmware you want to update to, and then click
Transfer.
IMPORTANT
Do not turn off the Label Printer or disconnect the cable during data transfer.
f Check the content you want to update, and then click Start to begin the update.
The firmware update begins.
Note
Do not turn off the Label Printer during the update process.