User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
Set Up the Label Printer
6
1
c Place the DK Roll into the Roll Spool Guide (1).
• Make sure that the Roll Spool Arm (2) is inserted firmly in the Roll Spool Guide.
• Make sure the Stabilizer (3) slides into the notch of the Label Printer.
d Thread the DK Roll through the Label Printer.
• Align the edge of the DK Roll with the upright edge of the Label Output Slot.
• Check that the DK Roll is threaded straight so that the labels will not be skewed.
• Push the first label through the Label Output Slot until the end comes out of the Slot as shown.
Note
If you have difficulty inserting the first label, try inserting from the side under the sensor (1).
1
3
2
1