User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
Change the Label Printer Settings
29
5
• Command Character: Printing starts when the command character specified here is received.
• Data Insertion into All the Objects: Printing starts when the delimiter for the last object is received.
• Received Data Size: Printing starts when the number of characters specified here is received. However,
delimiters are not counted in the number of characters.
5 Character Code Table
Selects one of the character code sets.
6 International Character Set
Lists character sets for specific countries.
The following codes vary depending on the selected country:
23h 24h 40h 5Bh 5Ch 5Dh 5Eh 60h 7Bh 7Ch 7Dh 7Eh
To change the characters, download the P-touch Template Manual/Command Reference (English only)
from your model's Manuals page on the Brother Solutions Center at support.brother.com/manuals
.
7 Command Prefix Character
Specifies the prefix character code that identifies commands used in P-touch Template mode.
8 Non-Printed Character
Characters specified here are not printed when data is received (maximum of 20 characters).
9 Available Return Code
The line feed code is used when feeding data to indicate that the following data should be moved to the
next line in a text object. Select one of four line feed codes or type the line feed code you want (maximum
of 20 characters).
10 Replace FNC1
Replaces GS codes with FNC1.
11 Number of Copies
Sets the number of copies (maximum of 99 copies).
12 Cut option
Specifies if the Label Printer should cut the labels automatically and how many labels to print before cutting
(maximum of 99 labels).
13 Set
Applies the settings to the Label Printer.
To save the specified settings to a command file to reuse in the future, select Save in Command File from
the drop-down list.
14 Cancel
Cancels the settings and closes the dialog box. The settings remain unchanged.
15 Default
Returns all setting values in P-touch Template Settings dialog box to the default values.