User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
Change the Label Printer Settings
30
5
Printer Setting Tool for Mac 5
Using the Printer Setting Tool, you can specify the Label Printer's communication settings and device settings
from a Mac. Not only can you change the device settings for one Label Printer, but you can also apply the
same settings to multiple Label Printers.
Note
The Printer Setting Tool is automatically installed when you use the initial installer to install the printer
driver. For more information, see Install Printer Drivers and Software on a Computer on page 9.
IMPORTANT
The Printer Setting Tool is available only with compatible Brother Label Printers.
Before Using the Printer Setting Tool 5
Make sure the AC Power Cord is connected to the Label Printer and to an AC power outlet.
Make sure the printer driver has been installed correctly and you can print.
Connect the Label Printer to a computer with a USB Cable.
Use the Printer Setting Tool for Mac 5
a Connect the Label Printer you want to configure to the computer.
b Click Macintosh HD > Applications > Brother > Printer Setting Tool > Printer Setting Tool.app.
The Printer Setting Tool window appears.
c Check that the Label Printer you want to configure appears next to Printer. If a different Label Printer
appears, select the Label Printer you want from the pop-up list.
d Select any of the Settings Tabs, and then specify or change the settings you want.
e Click Apply Settings to the Printer to apply the settings to the Label Printer.
f Click Exit.
IMPORTANT
Use the Printer Setting Tool to configure the Label Printer only when the Label Printer is idle. The Label
Printer may malfunction if you try to configure it while it is processing or printing a print job.