User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
Print Labels Using P-touch Template
45
6
e Scan the P-touch template command barcode.
For more information, see List of Barcodes for the P-touch Template Function on page 122.
f From the list of barcodes under Basic settings, scan each barcode to send a command or setting to the
Label Printer.
Note
• Settings can be made with multiple commands.
• If you do not scan the barcode commands, a template is printed using the P-touch Template settings. The
default P-touch Template settings are to print a single copy with Auto Cut turned On.
For more information on P-touch Template Setting Tool, download P-touch Template Manual/Command
Reference (English only) from the Brother Solutions Center at support.brother.com/manuals
.
• To specify the number of copies you want to print, scan the Number of copies barcode, and then scan the
barcodes under For entering numbers to specify a three-digit number. The setting is automatically applied
when three digits have been specified.
Example:
Specify numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]
• To change the setting for the number of copies, scan the Number of copies barcode again, and then scan
the barcodes for the new three-digit number.
g Scan the Select template barcode and then scan the barcodes under For entering numbers with the
same number (three digits) as the Key Assign number used for the downloaded template to be printed.
The downloaded template is automatically selected after the three digit numbers have been scanned.
Example:
Specify the three digit numbers by scanning the following barcodes: 7i[0][0][7], 15i[0][1][5]