User Guide
Table Of Contents
- User’s Guide QL-1100
- Introduction
- Table of Contents
- Basic Operations
- 1 Set Up the Label Printer
- 2 Print Using a Computer (P-touch Editor)
- 3 Print Using P-touch Editor Lite (Windows® only)
- 4 Print Using a Mobile Device
- 5 Change the Label Printer Settings
- 6 Print Labels Using P-touch Template
- 7 Other Functions
- Application
- 8 How to Use P-touch Editor
- 9 How to Use the P-touch Address Book (Windows® only)
- 10 How to Use P-touch Editor Lite (Windows® only)
- 11 How to Use P-touch Transfer Manager and P-touch Library (Windows® only)
- P-touch Transfer Manager
- Transfer the Template to P-touch Transfer Manager
- Transfer Templates or Other Data from the Computer to the Label Printer
- Back up Templates or Other Data Saved in the Label Printer
- Delete Label Printer Data
- Create Transfer Package Files
- P-touch Library
- Start P-touch Library
- Open and Edit Templates
- Print Templates
- Search for Templates
- 12 How to Transfer Templates with P-touch Transfer Express (Windows® only)
- 13 How to Update P-touch Software
- Appendix
- brother ENG
Other Functions
54
7
IMPORTANT
Do not enlarge or reduce the size of the barcode sheet. The barcodes may not be identified correctly.
Print 4" (101.6 mm) Shipping Labels 7
This Label Printer allows you to print 4" (101.6 mm) wide shipping labels. You can adjust the printing margin
width on the 4.07" x 6.4" (103 mm x 164 mm) Shipping labels or the 4.07" (103 mm) Continuous rolls to
4" (101.6 mm) wide.
To make the necessary adjustments, go to your printer driver settings, and do the following:
a Click the Other tab.
b Select the Adjust to 4" (101.6 mm) shipping label check box.
c Click the Basic tab.
d Click the Paper Size drop-down list, and select 4.07" x 6.4" (Shipping label) (103 mm x 164 mm
(Shipping label)) or 4.07" (Shipping label) (103 mm (Shipping label)).
e Click OK.