Online User's Guide (PDF)
Table Of Contents
- Online User’s Guide RJ-3050/3050Ai RJ-3150/3150Ai
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Outlet (Optional)
- Connecting to a DC Power Outlet (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150/3150Ai Only)
- Turning the Printer On or Off
- Inserting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150/3150Ai Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150/3150Ai Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Section II: Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- 13 How to update P-touch Software
- Section III: Wireless network
Troubleshooting
122
8
Error messages from the printer (RJ-3150/3150Ai only)
Error Message Cause/Remedy
Incorrect Password Is the admin password correct?
Enter the correct password.
If you do not remember the password, use [Device settings] of the “Printer
Setting Tool” to reset the password. For details, see 11 Admin Password
in Display Settings (1) (RJ-3150/3150Ai only) on page 75.
No Template
Selected
There is no template with the specified number.
Specify a correct number.
When printing a template, an error is indicated if the specified template does
not exist.
Invalid Database Record There is no database with the specified number.
Specify a correct number.
An error is indicated if the search for a template with a linked database fails.
Media Error!
Check Loading
Is the correct RD Roll installed?
Check that the correct media, for example, type (die-cut label or continuous
length tape) and die-cut label size, is installed.
Is the RD Roll installed correctly?
If not, remove the RD Roll, and then reinstall it. For details, see Inserting the
RD Roll on page 10.
Are the roll guides touching the sides of the RD Roll?
Move the roll guides against the side of the RD Roll. For details, see
Inserting the RD Roll on page 10.
Is enough of the roll remaining?
If not, install a new RD Roll.
Cover Open
Close Cover
Is the RD Roll compartment cover open?
Check that the RD Roll compartment cover is closed.
Communication
Error
Transfer of the data failed. When sending a template as a .blf file, an error
is indicated if the model name in the file is different.
Has the wireless LAN or Bluetooth connection been interrupted?
The wireless LAN or Bluetooth connection was interrupted. Turn off the
printer, and then turn the printer on again.
WPS did not connect
Try to connect again?
The access point could not be found.
An access point for establishing a connection could not be specified.
Mass Storage
Operation Error
Is the printer in mass storage mode?
An error is indicated if the file system becomes corrupted or a file is copied
while a mass storage file is being processed. Turn off the printer.
Noncompatible USB device.
Remove Device
Has a device been connected that is not supported by the USB host port?
An overcurrent was detected by the USB host port, or connection of an
unsupported device was detected. Turn off the printer, and then check the
connected device.