Online User's Guide (PDF)
Table Of Contents
- Online User’s Guide RJ-3050/3050Ai RJ-3150/3150Ai
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Outlet (Optional)
- Connecting to a DC Power Outlet (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150/3150Ai Only)
- Turning the Printer On or Off
- Inserting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150/3150Ai Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150/3150Ai Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Section II: Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- 13 How to update P-touch Software
- Section III: Wireless network
Setting Up the Printer
7
1
Connecting to a DC Power Outlet (Optional) 1
Connect the printer to your vehicle’s 12 V DC power outlet (cigarette lighter, etc.) to charge the rechargeable
battery.
a Connect the car adapter to the vehicle’s 12 V DC power outlet.
b Connect the car adapter to the printer.
1 Car adapter
Note
The car adapter is an optional accessory.
Using the Battery Charger (Optional) 1
The rechargeable Li-ion battery can be charged using the dedicated battery charger (PA-BC-001).
When you use an AC power outlet, up to four battery chargers can be connected together for charging at the
same time.
For details, refer to the operation manual that is included with the battery charger.
Using the Cradle (Optional) 1
The rechargeable Li-ion battery can be charged by placing the printer with the battery installed into the
dedicated cradle (PA-CR-001) and connecting the power cord.
When you use an AC power outlet, up to four cradles can be connected together for charging at the same
time.
For details, refer to the operation manual that is included with the cradle.
1