Online User's Guide (PDF)
Table Of Contents
- Online User’s Guide RJ-3050/3050Ai RJ-3150/3150Ai
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Outlet (Optional)
- Connecting to a DC Power Outlet (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150/3150Ai Only)
- Turning the Printer On or Off
- Inserting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150/3150Ai Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150/3150Ai Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Section II: Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- 13 How to update P-touch Software
- Section III: Wireless network
Troubleshooting
174
18
I cannot complete the Wi-Fi settings network setup configuration.
Question Solution
Are you using security software? Confirm your settings in the installer dialog box.
Allow access when the security software alert message appears during the
printer installation.
Are your security settings
(SSID/Network Key) correct?
Reconfirm and choose the correct security settings.
The manufacturer’s name or model number of the WLAN access point/router
may be used as the default security settings.
See the instructions supplied with your WLAN access point/router for
information on how to find the security settings.
Ask the manufacturer of your WLAN access point/router or ask your Internet
provider or network administrator.
Is your Brother printer placed too
far from your mobile device?
Move your Brother printer within about 3.3 feet (1 meter) of the mobile device when
you configure the Wi-Fi network settings.
Are there any obstructions (walls
or furniture, for example)
between your printer and the
mobile device?
Move your Brother printer to an obstruction-free area.
Is there a wireless computer,
Bluetooth supported device,
microwave oven or digital
cordless phone near the Brother
printer or the WLAN access
point/router?
Move other devices away from the Brother printer.
Are you using MAC Address
filtering?
You can confirm the MAC address by printing out the printer set-up information.
Press and hold the (Feed) button on your printer to print the printer set-up
information.
When you use RJ-3150/3150Ai, you can confirm the MAC address on the LCD
display of your printer.
1 Press the [Menu], [ ], or [ ] button to select the [WLAN] menu, and then press
the [OK] button.
2 Select [WLAN Status] using [ ] or [ ], and then press the [OK] button.
Is your WLAN access
point/router in stealth mode (not
broadcasting the SSID?)
You should enter the correct SSID name during the installation or when using
[Communication settings] in the Printer Setting Tool.
Check the SSID name in the instructions supplied with your WLAN access
point/router and reconfigure the wireless network setup.