Online User's Guide (PDF)
Table Of Contents
- Online User’s Guide RJ-3050/3050Ai RJ-3150/3150Ai
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Outlet (Optional)
- Connecting to a DC Power Outlet (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150/3150Ai Only)
- Turning the Printer On or Off
- Inserting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150/3150Ai Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150/3150Ai Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Section II: Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- 13 How to update P-touch Software
- Section III: Wireless network
Setting Up the Printer
38
1
Note
The format for the time and date can be changed. Select [Administration], and then select [Date
Format] or [Time Format] to specify the setting. (The default password is "1111".)
Setting the Menu Security 1
When setting the menu security, access to the Administration mode can be restricted by setting a password.
a Press the [Menu], [ ], or [ ] button to select the [Administration] menu, and then press the [OK]
button. (The default password is "1111".)
b Select [Menu Security] > [Menu Security (On/Off)] > [On] using [ ] or [ ], and then press the
[OK] button.
To set the password, select the [Administration] menu > [Menu Security] > [Set Password] using
[ ] or [ ], and then press the [OK] button. Specify the first number using [ ] or [ ], and then press the [OK]
button to proceed to the next number. Specify the remaining three numbers in the same way.
Note
• After a password has been set, the password input screen appears when the [Administration] menu
is selected. Enter in the specified 4-digit password using [ ] or [ ], and then press the [OK] button.
• To cancel the password settings, select the [Administration] menu and enter the password. Then,
select [Menu Security] > [Menu Security (On/Off)] > [Off].
• If you do not remember the password, use [Device settings] in the “Printer Setting Tool” to return all
settings to their factory defaults or specify the password again and apply it. For details, see Device Settings
on page 67.