Online User's Guide (PDF)
Table Of Contents
- Online User’s Guide RJ-3050/3050Ai RJ-3150/3150Ai
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Section I: Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Outlet (Optional)
- Connecting to a DC Power Outlet (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150/3150Ai Only)
- Turning the Printer On or Off
- Inserting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150/3150Ai Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150/3150Ai Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Section II: Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- 13 How to update P-touch Software
- Section III: Wireless network
Using the Printer
40
2
Button Functions 2
(Power) button function
Operation
Turn the printer on
While the printer is turned off, press and hold the (Power) button until the
POWER indicator lights in green (for RJ-3050/3050Ai) or the LCD display turns
on (for RJ-3150/3150Ai).
Turn the printer off
While the printer is turned on, press and hold the (Power) button until the
POWER indicator turns off (for RJ-3050/3050Ai) or the LCD display turns off
(for RJ-3150/3150Ai). (If the [Auto Power Off] feature is enabled in the Device
settings, the printer will turn itself off automatically after the selected period of
inactivity.)
Start up the printer in mass storage
mode
If you press and hold this button while also pressing the
(Bluetooth) button
(for RJ-3050/3050Ai) or the OK button (for RJ-3150/3150Ai), the printer starts
up in mass storage mode (see Mass Storage on page 91).
(Feed) button function
Operation
Feed the paper When the paper type is set to [Die-cut Label] or [Media With Marks]:
Press the (Feed) button to automatically feed the paper to the print
position.
When the paper type is set to [Continuous Length Tape]:
Press the (Feed) button to feed the paper. The paper feeds a fixed length;
you can use a command to change this length.
Print the printer set-up information
Make sure that a roll is set, and then press and hold the (Feed) button. The
printer starts printing its settings (see Printing the Printer Set-up Information
on page 116).
(Wi-Fi) button function
(RJ-3050/3050Ai only)
Operation
Use WPS to set wireless network
settings easily
Wi-Fi settings can be configured by simply pressing and holding this button,
making it easy to install the printer driver or other software (see Installing the
Printer Driver and the Software on page 21).
Use Wi-Fi to communicate when
printing
When the printer and computer are not connected via Wi-Fi, press this button
to connect them and send data to the printer.
End the Wi-Fi connection When the printer and computer are connected via Wi-Fi, press this button to
end the connection.
Execute a file stored in the mass
storage area
If you press this button while the printer is running in mass storage mode, you
can execute a command file stored in the mass storage area (see Mass
Storage on page 91).